Synthesen von Carotinen mit ψ-Endgruppen und (Z)-Konfiguration an terminalen konjugierten Doppelbindungen

Syntheses of Carotenes with ψ-End Groups and (Z)-Configuration at Terminal Conjugated Double Bonds Five carotenes bearing (5Z)-ψ-end groups were synthesized and carefully characterized: (5Z)-lycopene ( 6 ), (5Z5′Z)-lycopene ( 7 ), (5′Z)-neurosporene ( 8 ), (5′Z)-β,ψ-carotene ( 12 ), and (5′Z)-ε,ψ-carotene ( 14 ).     

Nuclear magnetic relaxation in water revisited

In this study, we revisited nuclear magnetic relaxation of (1)H in water at very low Larmor frequencies that has been studied intensively in earlier years. We make use of the recently developed superconducting quantum interference device based ultra-low field NMR technique, which enables much easier access to the longitudinal spin-lattice relaxation time T(1) and the transversal spin-spin relaxation time T(2) below several kHz than traditional field cycling methods. Our data reproduce and complement the earlier results, in that they corroborate the finding of an exchange process with a correlation time of about 0.34 ms at room temperature which can be attributed to the migration of hydronium and hydroxyl ions in neutral water via hydrogen bridges. The corresponding relaxation process is driven by the interaction of the protons with (17)O and contributes to the T(1) and the T(2) relaxation rate by about 0.12 s(-1). In addition, we found evidence of a very slow exchange process at about 100 Hz that has hitherto not been reported.     

Bifunctional pincer-type organometallics as substrates for organic transformations and as novel building blocks for polymetallic materials

The reactivity of the bifunctionalized ligand NC(Br)N-I 1 [IC(6)H(2)(CH(2)NMe(2))(2)-3,5-Br-4] has been studied as a versatile synthon for organic and/or organometallic synthesis. Chemoselective metalation (M = Pd, Pt, Li) at the C(aryl)-I or C(aryl)-Br bonds was achieved by choosing the appropriate metal precursors. In this way a series of Pt(II) and Pd(II) complexes were prepared that have a second functional group available for further reactions. These Pt(II) and Pd(II) complexes were subjected to a wide range of organic and organometallic reactions, revealing the remarkable stability of their M-C sigma-bond and opening an easy route for the synthesis of mono- and (hetero)bimetallic building blocks. The scope of the chemistry of such building blocks shows that they are good candidates for use in the synthesis of dendrimers, bioorganometallic systems, or polymetallic materials. The X-ray crystal structures of the most representative complexes (2, 3a, 19, 20, and 24) are also reported.     

Carbazole Dendrimers as Solution‐Processable Thermally Activated Delayed‐Fluorescence Materials

Recently, thermally activated delayed fluorescence (TADF) materials have received increasing attention as effective emitters for organic light‐emitting diodes (OLEDs). However, most of them are usually employed as dopants in a host material. In this report, carbazole dendrimers with a triphenyl‐s‐triazine core are reported, which are the first solution‐processable, non‐doped, high‐molecular‐weight TADF materials. The dendrimers were obtained by a new and facile synthetic route using the tert‐butyldimethylsilyl moiety as a protecting group. All dendrimers showed TADF in toluene. Measurements of the temperature‐dependent luminescence lifetime revealed that spin‐coated neat films also showed TADF with moderate quantum yields. OLED devices incorporating these dendrimers as spin‐coated emitting layers gave external quantum efficiencies of up to a 3.4 %, which suggests that this device is harvesting triplet excitons. This result indicates that carbazole dendrimers with attached acceptors are potential TADF materials owing to their polarized electronic structure (with HOMO–LUMO separation).     

Stereoselective Michael Addition of Carbonyl Compounds to ( E )-β-Nitrostyrene Catalysed by N -Toluensulfonyl-l -proline Amide in Ionic Liquids

Summary. N-Toluensulfonyl-l-prolin amide was tested as catalyst in the enantioselective Michael addition of carbonyl compounds to (E)-β-nitrostyrene in nine ionic liquids under different reaction conditions. The reaction rates and enantioselectivities were strongly dependent on the ionic liquids. Change of enantioselectivity was observed too and it is attributed to both the cation and the anion of ionic liquid. The best yields (up to 98%) and enantioselectivity (70% ee) of product were obtained in a basic ionic liquid [bmim]BF₄ at room temperature.     

Fractionation factors for stable isotopes of N and O during N2O reduction in soil depend on reaction rate constant

Nitrous oxide (N(2)O) is a major greenhouse gas that is mainly produced but also reduced by microorganisms in soils. We determined factors for N and O isotope fractionation during the reduction of N(2)O to N(2) in soil in a flow-through incubation experiment. The absolute value of the fractionation factors decreased with increasing reaction rate constant. Reaction rates constants ranged from 1.7 10(-4) s(-1) to 4.5 10(-3) s(-1). The minimum, maximum and median of the observed fractionation factors were for N -36.0 per thousand, -1.0 per thousand and -9.3 per thousand and for O -74.0 per thousand, -6.9 per thousand and -26.3 per thousand, respectively. The ratio of O isotope fractionation to N isotope fractionation was 2.4 +/- 0.3 and it was independent from the reaction rate constants. This leads us to conclude that fractionation factors are variables while their ratio in this particular reaction might be a constant.     

Titanium Salalen Catalyzed Enantioselective Benzylic Hydroxylation

The titanium complex of the cis-1,2-diaminocyclohexane (cis-DACH) derived Berkessel-salalen ligand is a highly efficient and enantioselective catalyst for the asymmetric epoxidation of terminal olefins with hydrogen peroxide (“Berkessel-Katsuki catalyst”). We herein report that this epoxidation catalyst also effects the highly enantioselective hydroxylation of benzylic C−H bonds with hydrogen peroxide. Mechanism-based ligand optimization identified a novel nitro-salalen Ti-catalyst of the highest efficiency ever reported for asymmetric catalytic benzylic hydroxylation, with enantioselectivities of up to 98 % ee, while overoxidation to ketone is marginal. The novel nitro-salalen Ti-catalyst also shows enhanced epoxidation efficiency, as evidenced by e.g. the conversion of 1-decene to its epoxide in 90 % yield with 94 % ee, at a catalyst loading of 0.1 mol-% only.     

CaNa[Cr(OH)6] – A Layered Hydroxochromate(III) with Ordered Brucite Structure and its Thermal Decomposition

Green single-crystals of the hydroxochromate(III) CaNa[Cr(OH)₆] were grown under highly alkaline hydrothermal conditions at about 200 °C. The starting materials Ca(NO₃)₂ · 6H₂O and Cr(NO₃)₃ · 9H₂O were reacted in a mixture of water and sodium hydroxide with the molar ratio of 2.8:1. CaNa[Cr(OH)₆] crystallizes in the non-centrosymmetric trigonal space group R3 with the lattice parameters a = 583.86(2) pm and c = 1428.73(6) pm [T = 100(1) K]. Characteristically, the crystals are reverse-obverse as well as inversion twins. The crystal structure is a stack of uncharged metal hydroxide layers, which can be regarded as a cation-ordered rhombohedral variant of the Mg(OH)₂ (brucite) structure type. The oxidation state of chromium(III) and its coordination by hydroxide groups was confirmed by UV/Vis and IR spectroscopy, respectively. Temperature-dependent magnetic measurements revealed paramagnetic behavior with an effective moment of 3.82 μ_B per chromium atom. The thermal decomposition of CaNa[Cr(OH)₆] takes place at about 225 °C, where the fast elimination of 1.5 equivalents of water is followed by the oxidation of chromium(III) to chromium(VI). Upon further heating to 1000 °C and 1200 °C, the intermediate decomposition products CaCrO₄ and Na₂CrO₄ transform into the oxochromates(V) Ca₅(CrO₄)₃O_0.5 and Ca₃(CrO₄)₂, respectively.     

Elemental Analyses Using Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry (LA-ICP-MS) of Geological Samples Fused with Li2B4O7 and Calibrated Without Matrix-Matched Standards

 Laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) was used as a complementary technique to X-ray fluorescence (XRF), for multi-element analysis of geological samples fused with lithium-tetraborate Li₂B₄O₇). Different calibration strategies using external non-matrix matched reference materials were investigated. Various internal standards were tested, including the use of Li from the flux, and the use of the naturally occurring internal standards, Si or Ca. The use of a naturally occurring standard is not as efficient as this required a prior analysis of the samples using XRF. The obtained values for the analysis of geological reference materials were compared with consensus literature values, and satisfactory agreement was found. Laser pits, which were formed, had a diameter of 80 μm and 3–5 replicates on each fused disc were measured. The reproducibility of the method was better than 10% for concentrations above 1 μg/g and better than 15% for lower concentrations. The use of Li as the internal standard offers the possibility of multi-element determinations in geological samples, which have an unknown composition when the laser ablation analysis is carried out. However, using the calculated stoichiometric composition of the lithium-tetraborate for the calculation of the Li concentration leads to a constant deviation from the recommended values. Therefore, it was necessary to determine the Li concentration within each sample batch using at least one lithium tetraborate fused geological reference material. This resulting Li concentration in the beads was then used for all subsequent samples in a run. Limits of detection, reproducibility, deviation from reference values indicate the potential of LA-ICP-MS for such bulk analysis without matrix matched calibration standards.     

Hydrogen‐Bonding in Aminocatalysis: From Proline and Beyond

This Concept article summarizes recent progress in the field of hydrogen‐bonding aminocatalysis using proline‐derived systems. The aminocatalysts available in the literature are categorized by the incorporated hydrogen‐bonding scaffold and its mode of recognition. Both mono‐ and double‐hydrogen‐bonding motifs are discussed and examples of their application in asymmetric synthesis are given.