Heterogeneous photobleaching in confocal microscopy

Photobleaching was studied during recording of confocal scanning laser microscopy. Studies on fluorescent gels of FITC-labeled dextran were used to evaluate differential bleaching along thez-axis. Differential bleaching along the z-axis was observed and it was seen that this was related to the numerical aperture of the objective in use. This points to the conclusion that photon energy flux density is an important parameter in photobleaching. To check if photon energy flux density heterogeneity is affected by local variation in the refractive index of the sample, photobleaching rates were calculated for different fluorescent objects (sections of seeds, animal cells stained with nuclear stains, immunocytochemistry preparations) and a pronounced similarity was found between photobleaching rates and DIC images.     

First-principles investigations of the Ni3Sn alloy at steam reforming conditions

The structure and surface composition of a Ni₃Sn alloy at conditions relevant for the steam reforming reaction was investigated using density functional theory calculations. Both the flat Ni₃Sn(0 0 0 1) surface and a surface with steps in the closed packed direction [1 0  0]were considered. The adsorption geometries and energies of the species CO, C, OH and H were calculated. Chemical potentials were used to map out which adsorbates are on the surface under varying conditions. It was found that adsorbates preferably bind to Ni as nearest neighbor with Sn as second-nearest neighbor. The binding energy is slightly stronger than on pure Ni. Adsorbate binding to Sn was found to be very unfavorable. Binding free energies indicate that at high temperature the alloy surface will be predominantly covered by CO and C, and at low temperatures one may find H and almost no OH. Even though the nominal composition of the investigated alloy is Ni₃Sn, the surface composition may differ significantly depending on temperature and pressure of the gas phase. This effect was investigated by calculating segregation energies both in the absence and in the presence of adsorbates. For the flat surface, it was found that only the bulk termination is present under relevant conditions. In contrast, it was found that for steps preferential adsorption of CO and C on Ni sites may lead to adsorption-induced segregation at temperatures below 400 °C. When taking segregation into account, the most stable Ni₃Sn surfaces will not bind CO or C at the same condition that Ni does. This is in excellent agreement with the previously proven ability of Ni-Sn alloys to inhibit graphite formation.     

Self‐doping PPV oligomers – electrochemistry and structure of the self‐doped systems

A novel class of self‐doping conjugated oligomers, E,E‐2‐(sulfoalkoxy)‐5‐alkoxy‐1,4‐bis[2‐(2,4,6‐trimethoxyphenyl) ethenyl]benzenes, is presented. The synthesis and spectroscopic characterisation of five such oligomers are described, and an electrochemical analysis using cyclic voltammetry is performed to determine the anodic peak potentials. A structural study is performed on six self‐doping oligomers in which the structures and energies of the possible mono‐molecular forms of the electrically conducting doped material are described and evaluated using Hirshfeld charges and the Quantum Theory of Atoms In Molecules. Copyright © 2009 John Wiley & Sons, Ltd.     

Realisation and metrological characterisation of thickness standards below 100 nm

High-accuracy film thickness measurements in the range below 100 nm can be made by various complex methods like spectral ellipsometry (SE), scanning force microscopy (SFM), grazing incidence X-ray reflectometry (GIXR), or X-ray fluorescence analysis (XRF). The measurement results achieved with these methods are based on different interactions between the film and the probe. A key question in nanotechnology is how to achieve consistent results on a level of uncertainty below one nanometre with different techniques.Two different types of thickness standards are realised. Metal film standards for X-ray techniques in the thickness range 10 to 50 nm are calibrated by GIXR with monochromatised synchrotron radiation of 8048 eV. The results obtained at four different facilities show excellent agreement. SiO₂ on Si standards for SE and SFM in the thickness range 6 to 1000 nm are calibrated by GIXR with monochromatised synchrotron radiation of 1841 eV and with a metrological SFM. Consistent results within the combined uncertainties are obtained with the two methods. Surfaces and interfaces of both types of standards are additionally investigated by transmission electron microscopy (TEM). PACS 61.10.Kw; 68.55.Jk; 06.20.Fn; 06.60.Mr; 07.79.Lh     

F-18-FDG uptake is a reliable predictory of functional recovery of akinetic but viable infarct regions as defined by magnetic resonance imaging before and after revascularization

Identification of akinetic but viable myocardium is important for the selection of patients for coronary revascularization. In order to assess predictive values of end-diastolic wall thickness and dobutamine induced wall thickening obtained by magnetic resonance imaging (MRI) and [18F]Fluorodeoxyglucose uptake assessed by positron emission tomography (F-18-FDG-PET), these parameters were compared to recovery of left ventricular function after successful revascularization. Forty patients with chronic myocardial infarction and regional a- or dyskinesia by ventriculography underwent rest- and dobutamine-MRI studies (10 microg dobutamine/kg body weight/min) and F-18-FDG-PET. Viability of the infarct region was considered to be present if; 1) end-diastolic wall thickness was > or =5.5 mm; 2) dobutamine induced wall thickening > or =2 mm could be measured; and 3) normalized F-18-FDG-uptake was > or =50% in > or =50% of akinetic segments. Preserved end-diastolic wall thickness was found in 32/40 patients, functional improvement during dobutamine infusion in 26/40 patients and preserved F-18-FDG-uptake in 29/40 patients. After revascularization regional left ventricular function improved in 25/40 patients. Positive and negative predictive values and diagnostic accuracy were 78%, 100%, and 83% for preserved end-diastolic wall thickness, 92%, 93%, and 93% for dobutamine inducible contraction reserve and 86%, 100%, and 90% for preserved F-18-FDG-uptake. Quantitative assessment of dobutamine induced systolic wall thickening by MRI and F-18-FDG-uptake by PET are highly accurate techniques for the identification of viable myocardium and prediction of functional recovery after successful revascularization. Preserved end-diastolic wall thickness results in an overestimation of viable myocardium compared to functional improvement, but wall thickness <5.5 mm excludes recovery of regional function.     

57Fe Mössbauer Spectroscopy Study of LaFe1−x Co x O3 (x=0 and 0.5) Formed by Mechanical Milling

Hyperfine Interactions - Perovskite-related phases of the type LaFe1?x Co x O3 (x=0 and 0.5) have been synthesised by milling techniques. The materials are of smaller particle size and more...     

Autocorrelation functions of nonlinear Fokker-Planck equations

The European Physical Journal B - We compute autocorrelation functions from nonlinear Fokker-Planck equations that describe nonlinear families of Markov diffusion processes and illustrate this...     

Type-II InAs/GaSb superlattices for very long wavelength infrared detectors

Type-II superlattices (SLs) can be designed for semiconductor band gaps as large as 400 meV down to semimetallic. This flexibility in design makes them an excellent candidate for infrared photodiodes with cut-off wavelengths beyond 15 μm. There are relatively few options for high-performance infrared detectors to cover wavelengths longer than 15 μm, especially for operating temperatures above 15 K. In the past few years, excellent results have been obtained on photoconductive and photodiode samples designed for infrared detection in the very long wavelength infrared (VLWIR) range (λ>15 μm). There is a variety of possible designs for these SLs which will produce the same narrow band gap by adjusting individual layer thicknesses, or indium content, in the InGaSb layer. Several of these different design options have been grown and characterized. These designs often require monolayer control per layer over hundreds of repeats in the SL. Photoresponse spectra for type-II SLs are compared to show how the design choices not only change the band gap but also the band structure, as reflected in features observed in the spectra. Theoretical modeling results are used to interpret the photoresponse spectra. SLs with cut-off wavelengths ranging from 15 to 25 μm are covered.     

Methane activation on Ni(1 1 1): Effects of poisons and step defects

We have, theoretically and experimentally, investigated the dissociation of methane on the terraces and steps of a Ni(1 1 1) surface. Using Density Functional Theory (DFT) total energy calculations combined with Ultra High Vacuum (UHV) experiments, we find that the steps exhibit a higher activity than the terraces. We have, furthermore, investigated how carbon and sulfur present on the surface will deactivate the steps, leaving only the terraces active. We find the intrinsic sticking probabilities of methane on the steps and terraces at 500 K to be 2.8 × 10⁻⁷ for the steps and 2.1 × 10⁻⁹ for the terraces, in complete agreement with our calculated difference in activation energy of 17 kJ/mol.     

Intra-operative acoustic hemostasis of liver: production of a homogenate for effective treatment

Objective: We have shown that High-Intensity Focused Ultrasound (HIFU) can effectively control bleeding from injuries to solid organs such as liver, spleen, and lung. Achievement of hemostasis was augmented when a homogenate of tissue and blood was formed. The objective of this study was to investigate quantitatively the effect of homogenate production on HIFU application time for hemostasis. Possible mechanisms involved in homogenate production were also studied.Methods: Ten anesthetized rabbits had laparotomy and liver exposure. Liver incisions, 15-25 mm long and 3-4 mm deep, were made followed immediately by HIFU application. Two electrical powers of 80 and 100 W corresponding to focal acoustic intensities of 2264 and 2829 W/cm², respectively were used. Tissue and homogenate temperatures were measured. Smear and histological tissue sample analysis using light microscopy were performed.Results: In treatments with homogenate formation, hemostasis was achieved in 76 ± 1.3 s (Mean ± Standard Error Mean: SEM) at 80 W. In treatments without homogenate formation (at 80 W), hemostasis was achieved in 106 ± 0.87 s. At 100 W, hemostasis was achieved in 46 ± 0.3 s. The time required for homogenate formation, at 80 and 100 W were 60 ± 2.5 and 23 ± 0.3 s, respectively. The homogenate temperature was 83 °C (SEM 0.6 °C), and the non-homogenate tissue temperature at the treatment site was 60 °C (SEM 0.4 °C). The smear and histological analysis showed significant blood components and cellular debris in the homogenate, with some intact cells.Conclusion: The HIFU-induced homogenate of blood and tissue resulted in a statistically significant shorter HIFU application time for hemostasis. The incisions with homogenate had higher temperatures as compared to incisions without homogenate. Further studies of the correlation between homogenate formation and temperature must be done, as well as studies on the long-term effects of homogenate in achieving hemostasis.