Polymerization of styrene to isotactic polymer with MAO-Ni(acac)2. Examination of the factors that influence activity and stereospecificity

The soluble catalyst system methylaluminoxane (MAO)-Ni(acac), (acac: acetylacetonate) gives polystyrene consisting of an amorphous (aPS) and a crystalline isotactic (ips) fraction. Al(CH₃)₃, which is always present in commercial samples of MAO, decreases both polymer yield and stereospecificity. The polymer yield increases with increasing the MAO/Ni ratio but, at the same time, the iPS/aPS ratio decreases. Addition of N(C₂H₅)₃ (mole ratio N/Ni = 1) increases the proportion of the isotactic fraction, while it decreases the polymer yield. A tentative interpretation of the stereospecificity is reported.     

Polymeric Gene Carriers Bearing Pendant β‐Cyclodextrin: The Relevance of Glycoside Permethylation on the “In Vitro” Cell Response

The incorporation of cyclodextrins (CDs) to nonviral cationic polymer vectors is very attractive due to recent studies that report a clear improvement of their cytocompatibility and transfection efficiency. However, a systematic study on the influence of the CD derivatization is still lacking. In this work, the relevance of β‐CD permethylation has been addressed by preparing and evaluating two series of copolymers of the cationic N‐ethyl pyrrolidine methacrylamide (EPA) and styrenic units bearing pendant hydroxylated and permethylated β‐CDs (HCDSt and MeCDSt, respectively). For both cell lines, CDs permethylation shows a strong influence on plasmid DNA complexation, “in vitro” cytocompatibility and transfection efficiency of the resulting copolymers over two murine cell lines. While the incorporation of the hydroxylated CD moiety increased the cytotoxicity of the copolymers in comparison with their homopolycationic counterpart, the permethylated copolymers have shown full cytocompatibility as well as superior transfection efficiency than the controls. This behavior has been related to the different chemical nature of both units and tentatively to a different distribution of units along the polymeric chains. Cellular internalization analysis with fluorescent copo­lymers supports this behavior.

     

Liquid–liquid equilibrium and interfacial tension of the ternary system heptane + thiophene + 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide

The liquid–liquid equilibrium (LLE) of the ternary system comprising heptane, thiophene and the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C₂mim][NTf₂]) was determined at 25 °C and atmospheric pressure, for preliminary evaluation of the potential of this ionic liquid as solvent for the desulfurisation of transportation fuels. Classical parameters such as solute distribution ratio and selectivity were calculated from the LLE data and subsequently analysed. The LLE data were also correlated by means of the ‘Non-Random Two-Liquid’ (NRTL) equation. Besides the LLE, another critical property for the design of extraction processes, namely the interfacial tension, was determined in parallel, throughout the immiscibility domain of the ternary system. For the first time, the LLE and the interfacial tension of a ternary system involving an ionic liquid are jointly reported.     

Naphthalene Exchange in [Re(η6-napht)2]+ with Pharmaceuticals Leads to Highly Functionalized Sandwich Complexes [M(η6-pharm)2]+ (M=Re/99mTc)

Bis-arene sandwich complexes are generally prepared by the Fischer-Hafner reaction, which conditions are incompatible with most O- and N- functional groups. We report a new way for the synthesis of sandwich type complexes [Re(η⁶-arene)₂]⁺ and [Re(η⁶-arene)(η⁶-benzene)]⁺ from [Re(η⁶-napht)₂]⁺ and [Re(η⁶-napht)(η⁶-benzene)]⁺, with functionalized arenes and pharmaceuticals. N-methylpyrrolidine (NMP) facilitates the substitution of naphthalene with the incoming arene. A series of fully characterized rhenium sandwich complexes with simple arenes, such as aniline, as well as with active compounds like lidocaine and melatonin are presented. With these rhenium compounds in hand, the radioactive sandwich complexes [^99mTc(η⁶-pharm)₂]⁺ (pharm=pharmaceutical) can be unambiguously confirmed. The direct labelling of pharmaceuticals with ^99mTc through η⁶-coordination to phenyl rings and the confirmation of the structures with the rhenium homologues opens a path into molecular theranostics.     

Photoactivatable V-Shaped Bifunctional Quinone Methide Precursors as a New Class of Selective G-quadruplex Alkylating Agents

Combining the selectivity of G-quadruplex (G4) ligands with the spatial and temporal control of photochemistry is an emerging strategy to elucidate the biological relevance of these structures. In this work, we developed six novel V-shaped G4 ligands that can, upon irradiation, form stable covalent adducts with G4 structures via the reactive intermediate, quinone methide (QM). We thoroughly investigated the photochemical properties of the ligands and their ability to generate QMs. Subsequently, we analyzed their specificity for various topologies of G4 and discovered a preferential binding towards the human telomeric sequence. Finally, we tested the ligand ability to act as photochemical alkylating agents, identifying the covalent adducts with G4 structures. This work introduces a novel molecular tool in the chemical biology toolkit for G4s.     

A Stable Porphyrin Functionalized Graphite Electrode Used at the Oxygen Evolution Reaction Potential

Many researches have been devoted to rechargeable power generators that can store (but also release) energy. This availability is ensured through (e. g.) the oxygen evolution reaction (OER). However, (i) large values of the overpotentials and (ii) a progressive detriment of the anode (graphite) electrode limit the ultimate device. In view of enhancing the electrode performances, graphite was protected by following different strategies, which oblige to follow precise preparation protocols. Here, we prove that a thin layer of free-base porphyrin molecules is able to protect the underneath graphite electrode from detriment even if many (about 100) electrochemical cycles are performed.     

Use of green alternative solvents in dispersive liquid-liquid microextraction: A review

Dispersive liquid-liquid microextraction is one of the most widely used microextraction techniques currently in the analytical chemistry field, mainly due to its simplicity and rapidity. The operational mode of this approach has been constantly changing since its introduction, adapting to new trends and applications. Most of these changes are related to the nature of the solvent employed for the microextraction. From the classical halogenated solvents (e.g., chloroform or dichloromethane), different alternatives have been proposed in order to obtain safer and non-pollutants microextraction applications. In this sense, low-density solvents, such as alkanols, switchable hydrophobicity solvents, and ionic liquids were the first and most popular replacements for halogenated solvents, which provided similar or better results than these classical dispersive liquid-liquid microextraction solvents. However, despite the good performances obtained with low-density solvents and ionic liquids, researchers have continued investigating in order to obtain even greener solvents for dispersive liquid-liquid microextraction. For that reason, in this review, the evolution over the last five years of the three types of solvents already mentioned and two of the most promising solvent alternatives (i.e., deep eutectic solvents and supramolecular solvents), have been studied in detail with the purpose of discussing which one provides the greenest alternative.     

Green Synthesis of Gold and Silver Nanoparticles Using Leaf Extract of Capsicum chinense Plant

So far, several studies have focused on the synthesis of metallic nanoparticles making use of extracts from the fruit of the plants from the genus Capsicum. However, as the fruit is the edible, and highly commercial, part of the plant, in this work we focused on the leaves, a part of the plant that is considered agro-industrial waste. The biological synthesis of gold (AuNPs) and silver (AgNPs) nanoparticles using aqueous extracts of root, stem and leaf of Capsicum chinense was evaluated, obtaining the best results with the leaf extract. Gold and silver nanoparticles synthesized using leaf extract (AuNPs-leaf and AgNPs-leaf, respectively) were characterized by UV-visible spectrophotometry (UV-Vis), Fourier Transform Infrared Spectroscopy with Attenuated Total Reflection (FTIR-ATR), X-ray Photoelectron Spectroscopy (XPS), Ultra Hight Resolution Scanning Electron Microscopy coupled to Energy-Dispersive X-ray spectroscopy (UHR-SEM-EDX) and Transmission Electron Microscopy (TEM), and tested for their antioxidant and antimicrobial activities. In addition, different metabolites involved in the synthesis of nanoparticles were analyzed. We found that by the use of extracts derived from the leaf, we could generate stable and easy to synthesize AuNPs and AgNPs. The AuNPs-leaf were synthesized using microwave radiation, while the AgNPs-leaf were synthesized using UV light radiation. The antioxidant activity of the extract, determined by ABTS, showed a decrease of 44.7% and 60.7% after the synthesis of the AuNPs-leaf and AgNPs-leaf, respectively. After the AgNPs-leaf synthesis, the concentration of polyphenols, reducing sugars and amino acids decreased by 15.4%, 38.7% and 46.8% in the leaf extract, respectively, while after the AuNPs-leaf synthesis only reducing sugars decreased by 67.7%. These results suggest that these groups of molecules are implicated in the reduction/stabilization of the nanoparticles. Although the contribution of these compounds in the synthesis of the AuNPs-leaf and the AgNPs-leaf was different. Finally, the AgNPs-leaf inhibited the growth of S. aureus, E. coli, S. marcescens and E. faecalis. All of them are bacterial strains of clinical importance due to their fast antibiotic resistance development.     

Development and Validation of Multi-Residue Method for Drugs Analysis in Human Feces by Liquid Chromatography–Tandem Mass Spectrometry

The use of veterinary drugs in animal production is a common practice to secure animal and human health. However, residues of administrated drugs could be present in animal food products. Levels of drugs in food of animal origin are regulated within the European Union. In recent years, residues have been detected not only in food, but also in the environmental elements such as water or soil, meaning that humans are involuntarily exposed to these substances. This article presents a multiclass method for the analysis of various therapeutic groups of pharmaceuticals in human feces. Pharmaceuticals are extracted from feces with an acid extraction solvent, and after filtration the extract was analyzed by HPLC–MS/MS. A limit of detection of 10 ng/g was achieved for 9 pharmaceuticals, with linearity over 0.99 and repeatability and reproducibility lower than 20%. The method was satisfactorily applied in 25 feces samples of individuals that had declared not to be under medical treatment for the last two months. Results indicate the presence of six different compounds at concentration between 10 and 456 ng/g. This preliminary study showed the involuntary exposure of human gut microbiota to active substances such as pharmaceuticals