Impact of High-Pressure Homogenization on the Cell Integrity of Tetradesmus obliquus and Seed Germination

Microalgae have almost unlimited applications due to their versatility and robustness to grow in different environmental conditions, their biodiversity and variety of valuable bioactive compounds. Wastewater can be used as a low-cost and readily available medium for microalgae, while the latter removes the pollutants to produce clean water. Nevertheless, since the most valuable metabolites are mainly located inside the microalga cell, their release implies rupturing the cell wall. In this study, Tetradesmus obliquus grown in 5% piggery effluent was disrupted using high-pressure homogenization (HPH). Effects of HPH pressure (100, 300, and 600 bar) and cycles (1, 2 and 3) were tested on the membrane integrity and evaluated using flow cytometry and microscopy. In addition, wheat seed germination trials were carried out using the biomass at different conditions. Increased HPH pressure or number of cycles led to more cell disruption (75% at 600 bar and 3 cycles). However, the highest increase in wheat germination and growth (40–45%) was observed at the lowest pressure (100 bar), where only 46% of the microalga cells were permeabilised, but not disrupted. Non-treated T. obliquus cultures also revealed an enhancing effect on root and shoot length (up to 40%). The filtrate of the initial culture also promoted shoot development compared to water (21%), reinforcing the full use of all the process fractions. Thus, piggery wastewater can be used to produce microalgae biomass, and mild HPH conditions can promote cell permeabilization to release sufficient amounts of bioactive compounds with the ability to enhance plant germination and growth, converting an economic and environmental concern into environmentally sustainable applications.     

Simulation of Organic Liquid Product Deoxygenation through Multistage Countercurrent Absorber/Stripping Using CO2 as Solvent with Aspen-HYSYS: Process Modeling and Simulation

In this work, the deoxygenation of organic liquid products (OLP) obtained through the thermal catalytic cracking of palm oil at 450 °C, 1.0 atmosphere, with 10% (wt.) Na₂CO₃ as a catalyst, in multistage countercurrent absorber columns using supercritical carbon dioxide (SC-CO₂) as a solvent, with an Aspen-HYSYS process simulator, was systematically investigated. In a previous study, the thermodynamic data basis and EOS modeling necessary to simulate the deoxygenation of OLP was presented. This work addresses a new flowsheet, consisting of 03 absorber columns, 10 expansions valves, 10 flash drums, 08 heat exchanges, 01 pressure pump, and 02 make-ups of CO₂, aiming to improve the deacidification of OLP. The simulation was performed at 333 K, 140 bar, and (S/F) = 17; 350 K, 140 bar, and (S/F) = 38; 333 K, 140 bar, and (S/F) = 25. The simulation shows that 81.49% of OLP could be recovered and that the concentrations of hydrocarbons in the extracts of absorber-01 and absorber-02 were 96.95 and 92.78% (wt.) on a solvent-free basis, while the bottom stream of absorber-03 was enriched in oxygenated compounds with concentrations of up to 32.66% (wt.) on a solvent-free basis, showing that the organic liquid products (OLP) were deacidified and SC-CO₂ was able to deacidify the OLP and obtain fractions with lower olefin contents. The best deacidifying condition was obtained at 333 K, 140 bar, and (S/F) = 17.     

An open volume, high isolation, radio frequency surface coil system for pulsed magnetic resonance

We present an open volume, high isolation, RF system suitable for pulsed NMR and EPR spectrometers with reduced dead time. It comprises a set of three RF surface coils disposed with mutually parallel RF fields and a double-channel receiver (RX). Theoretical and experimental results obtained with a prototype operating at about 100 MHz are reported. Each surface RF coil (diameter 5.5 cm) was tuned to f₀ = 100.00 ± 0.01 MHz when isolated. Because of the mutual coupling and the geometry of the RF coils, only two resonances at f₁ = 97.94 MHz and f₂ = 101.85 MHz were observed. We show they are associated with two different RF field spatial distributions. In continuous mode (CW) operation the isolation between the TX coil and one of the RX coils (single-channel) was about −10 dB. By setting the double-channel RF assembly in subtraction mode the isolation values at f₁ or f₂ could be optimised to about −75 dB. Following a TX RF pulse (5 μs duration) an exponential decay with time constant of about 600 ns was observed. The isolation with single-channel RX coil was about −11 dB and it increased to about −47 dB with the double-channel RX in subtraction mode. Similar results were obtained with the RF pulse frequency selected to f₂ and also with shorter (500 ns) RF pulses. The above geometrical parameters and operating frequency of the RF assembly were selected as a model for potential applications in solid state NMR and in free radical EPR spectroscopy and imaging.     

Solutions of the Yang–Baxter equations on quadratic Lie groups: The case of oscillator groups

A Lie group is called quadratic if it carries a bi-invariant semi-Riemannian metric. Oscillator Lie groups constitute a subclass of the class of quadratic Lie groups. In this paper, we determine the Lie bialgebra structures and the solutions of the classical Yang–Baxter equation on a generic class of oscillator Lie algebras. Moreover, we show that any solution of the generalized classical Yang–Baxter equation (resp. classical Yang–Baxter equation) on a quadratic Lie group determines a left invariant locally symmetric (resp. flat) semi-Riemannian metric on the corresponding dual Lie groups.     

Self-imaging by a volume grating

The self-image phenomenon by a volume grating is proposed and theoretically analyzed. A theoretical model based on a path integral formulation to describe wave propagation through the grating inhomogeneous medium is applied. A modified version of the scalar diffraction theory Fresnel propagator is obtained which allows calculating the diffracted field amplitude by the grating. The proposed model is applied to amplitude and/or phase volume gratings. Remarkable features appear, in particular at the fractional Talbot distance 0.125z_T. In this case, if an in-phase real and imaginary grating modulation is considered a self-image intensity profile is observed for determined values of the absorptive and refractive parameters. On the other hand, a spatial comb intensity profile for a near half period shift between the real and imaginary grating modulations is found.     

Low-energy termination of graphene edges via the formation of narrow nanotubes

We demonstrate that free graphene sheet edges can curl back on themselves, reconstructing as nanotubes. This results in lower formation energies than any other nonfunctionalized edge structure reported to date in the literature. We determine the critical tube size and formation barrier and compare with density functional simulations of other edge terminations including a new reconstructed Klein edge. Simulated high resolution electron microscopy images show why such rolled edges may be difficult to detect. Rolled zigzag edges serve as metallic conduction channels, separated from the neighboring bulk graphene by a chain of insulating sp(3)-carbon atoms, and introduce van Hove singularities into the graphene density of states.     

Maximal rank space curves of high genus are projectively normal

Riassunto Se il genere è alto, le curve di rango massimo sono proiettivamente normali. La nozione di ?genere alto? è precisata fornendo un limite explicito, dipendente solo dal grado.

---

Summary Maximal rank space curves of high genus are projectively normal. We precise the meaning of ?high genus?, by giving an explicit bound, depending only on the degree.

---

---

Dal 14 giugno 1990: Dip. di Matematica ?U. Dini?, viale Morgagni 67/A, 50134 Firenze.