New strategy for the determination of gliadins in maize- or rice-based foods matrix-assisted laser desorption/ionization time-of-flight mass spectrometry: fractionation of gliadins from maize or rice prolamins by acidic treatment

A procedure for determining small quantities of gliadins by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) in gluten-free foods containing relatively large amounts of prolamin proteins from maize or rice is described. We report for the first time that gliadins, the ethanol-soluble wheat prolamin fraction, can be quantitatively solubilized in 1.0 M acetic acid, while the corresponding ethanol-soluble maize or rice prolamin fraction remains insoluble in acetic acid. We describe a methodology for the detection of gliadins in maize and rice foods based on a two-step procedure of extraction (60% aqueous ethanol followed by 1 M acetic acid). Subsequent MALDI-TOFMS analysis of the resulting acidic extract from these gluten-free foods clearly confirms the presence of a typical mass pattern corresponding to gliadin components, ranging from 30 to 45 kDa. Depending on the percentages of maize or rice flours employed in the elaboration of these foods, the combined procedure enables levels of gliadins from 100 to 400 ppm to be detected. The efficiency of this combined procedure corroborates enzyme-linked immunosorbent assay data for a large number of maize/rice gluten-free foods by means of direct visualization of the characteristic gliadin mass pattern in maize or rice foods.     

Synthesis of 6,19-sulfamidate bridged pregnanes

Conformationally restrained substituted pregnane-20-one derivatives were obtained by an intramolecular nitrene addition onto a C-5/C-6 double bond involving a tethered C-19 sulfamoyl moiety. The resulting aziridine underwent regioselective nucleophilic ring opening at C-5 at room temperature with cyanide, fluoride, and acetate. In the isolated case of acetate, a reversal of regioselectivity was observed at higher temperatures, a result attributed to a rearrangement process involving aziridine ring opening at the C-5 position and subsequent migration of the acetyl moiety to C-6.     

Aqueous synthesis of derivatized cyclopentadienyl complexes of technetium and rhenium directed toward radiopharmaceutical application

Half-sandwich complexes of the type [(RCOCp)M(CO)(3)] with M = Re and (99(m))Tc were synthesized from [M(OH(2))(3)(CO)(3)](+) in water. The R group can be an organic residue or a receptor binding biomolecule with a spacer to cyclopentadienyl (Cp). This provides a general route to Cp complexes of technetium without the need for starting from [TcBr(CO)(5)]. The X-ray structure of [(C(6)H(5)CH(2)COC(5)H(4))Tc(CO)(3)] has been elucidated. The compound crystallizes in the monoclinic space group P2(1)/c with a = 16.1454(9), b = 7.6300(6), and c = 12.3922(7) A and beta = 107.792(6) degrees. We have chosen a serotonergic receptor ligand (WAY) as an example for the derivatization of Cp with a bioactive molecule. WAY is linked to Cp by an aliphatic chain of variable length. The half-sandwich complexes were prepared from water and organic solvents. The structure of [(WAY4-Cp)Re(CO)(3)] could be elucidated. The compound crystallizes in the monoclinic space group P2(1)/c with a = 15.7112(6), b = 6.8775(3), and c = 25.5217(12) A and beta = 103.778(5) degrees. Quantification of inhibition constants gave a clear structure-activity relationship. A single methylene group between the receptor binding site and the half-sandwich complex gave an IC(50) of 217 nM for HT(1A), whereas a butylene linker resulted in retention of the inhibition constant with an IC(50) of 6 nM with respect to underivatized WAY. For use as radiopharmaceuticals, the compounds have also been prepared with (99m)Tc in quantitative yield.     

Reaction of ketenes with N,N-disubstituted α-aminomethyleneketones. XVIII. Synthesis of N,N-disubstituted 4-amino-3-phenyl-2H-naphtho[1,2-b]pyran-2-ones

1,4-Cycloaddition of phenylchloroketene to N,N-disubstituted 2-aminomethylene-3,4-dihydro-1(2H)naphthalenones gave the corresponding adducts, namely N,N-disubstituted 4-amino-3-chloro-3,4,5,6-tetrahydro-3-phenyl-2H-naphtho[1,2-b]pyran-2-ones II, in the case of aliphatic N,N-disubstitution or aromatic N-monosubstitution. Apart from IIf (NR₂ = NMePh), adducts II were unstable and were dehydrochlorinated in situ with DBN to give N,N-disubstituted 4-amino-5,6-dihydro-3-phenyl-2H-naphtho[1,2-b]pyran-2-ones III in fair overall yields. Compounds III were dehydrogenated with Pd/C in boiling p-cymene to afford the title compounds generally in high yields.     

Speciation of the new ligand di-isopropyliminodiacetoamide with Cu(II) using computational processing and graphical methods

The importance assigned to chelating agents in diverse areas has impelled studies concerning their development as related to metal ions representing a biological concern. The synthesis of di-isopropyliminodiacetoamide (D) is presented in this work. The acidity constant obtained for D was pKa = 5.79 +/- 0.04 with the aid of program SUPERQUAD. The equilibrium constants for D with Cu(II) were obtained with the aid of program SQUAD for CuD2+ and CuD2(2)+ species giving log beta1 = 4.795 +/- 0.002 and log beta2 = 8.374 +/- 0.004, respectively.     

Potential energy surface and rovibrational states of the ground Ar-HI complex

A potential energy surface for the ground electronic state of the Ar-HI van der Waals complex is calculated at the coupled-cluster with single and double excitations and a noniterative perturbation treatment of triple excitations [CCSD(T)] level of theory. Calculations are performed using for the iodine atom a correlation consistent triple-zeta valence basis set in conjunction with large-core Stuttgart-Dresden-Bonn relativistic pseudopotential, whereas specific augmented correlation consistent basis sets are employed for the H and Ar atoms supplemented with an additional set of bond functions. In agreement with previous studies, the equilibrium structure is found to be linear Ar-I-H, with a well depth of 205.38 cm(-1). Another two secondary minima are also predicted at a linear and bent Ar-H-I configurations with well depths of 153.57 and 151.57 cm(-1), respectively. The parametrized CCSD(T) potential is used to calculate rovibrational bound states of Ar-HI/Ar-DI complexes, and the vibrationally averaged structures of the different isomers are determined. Spectroscopic constants are also computed from the CCSD(T) surface and their comparison with available experimental data demonstrates the quality of the present surface in the corresponding configuration regions.     

Resolving overlapping peaks in ARXPS data: The effect of noise and fitting method

Peak-fitting of X-ray photoelectron spectroscopy (XPS) data can be very sensitive to noise when the difference on the binding energy among the peaks is smaller than the width of the peaks. This sensitivity depends on the fitting algorithm. Angle-resolved XPS (ARXPS) analysis offers the opportunity of employing the combined information contained in the data at the various angles to reduce the sensitivity to noise. The assumption of shared peak parameters (center and width) among the spectra for the different angles, and how it is introduced into the analysis, plays a basic role. Sequential fitting is the usual practice in ARXPS data peak-fitting. It consist on first estimating the center and width of the peaks from the data acquired at one of the angles, and then using those parameters as a starting approximation for fitting the data for each of the rest of the angles. An improvement of this method consists of averaging the centers and widths of the peaks obtained at the different angles, and then employing these values to assess the areas of the peaks for each angle. Another strategy for using the combined information is by assessing the peak parameters from the sum of the experimental data. The complete use of the combined information contained in the data-set is optimized by the simultaneous fitting method. It consists of the assessment of the center and width of the peaks by fitting the data at all the angles simultaneously. Computer-generated data was employed to compare the sensitivity with respect to noise between the sequential, averaged-sequential, sum, and simultaneous fitting methods. It is shown that the latter is significantly more robust and could provide reliable results even for noisy data and small peak separation. The fundamentals for the robustness of the simultaneous method are discussed, as well as the possibility of fitting many parameters at the same time. As an added feature of ARXPS, it was found that the estimation of the error intervals on the peak parameters is done remarkably more precisely by employing XPS data at various angles.     

Radon Measure-Valued Solutions for a Class of Quasilinear Parabolic Equations

Initial value problems for quasilinear parabolic equations having Radon measures as initial data have been widely investigated, looking for solutions which for positive times take values in some function space. In contrast, it is the purpose of this paper to define and investigate solutions that for positive times take values in the space of the Radon measures of the initial data. We call such solutions measure-valued, in contrast to function-valued solutionspreviously considered in the literature. We first show that there is a natural notion of measure-valued solution of problem (P) below, in spite of its nonlinear character. A major consequence of our definition is that, if the space dimension is greater than one, the concentrated part of the solution with respect to the Newtonian capacity is constant in time. Subsequently, we prove that there exists exactly one solution of the problem, such that the diffuse part with respect to the Newtonian capacity of the singular part of the solution (with respect to the Lebesgue measure) is concentrated for almost every positive time on the set where “the regular part (with respect to the Lebesgue measure) is large”. Moreover, using a family of entropy inequalities we demonstrate that the singular part of the solution is nonincreasing in time. Finally, the regularity problem is addressed, as we give conditions (depending on the space dimension, the initial data and the rate of convergence at infinity of the nonlinearity ψ) to ensure that the measure-valued solution of problem (P) is, in fact, function-valued.     

A Series of Iron(II)-NHC Sensitizers with Remarkable Power Conversion Efficiency in Photoelectrochemical Cells**

A series of six new Fe(II)NHC-carboxylic sensitizers with their ancillary ligand decorated with functions of varied electronic properties have been designed with the aim to increase the metal-to- surface charge separation and light harvesting in iron-based dye-sensitized solar cells (DSSCs). ARM130 scored the highest efficiency ever reported for an iron-sensitized solar cell (1.83 %) using Mg²⁺ and NBu₄I-based electrolyte and a thick 20 μm TiO₂ anode. Computational modelling, transient absorption spectroscopy and electrochemical impedance spectroscopy (EIS) revealed that the electronic properties induced by the dimethoxyphenyl-substituted NHC ligand of ARM130 led to the best combination of electron injection yield and spectral sensitivity breadth.