Structural changes in discotic samples during transition from crystal to discotic mesophase as revealed by electron microscopy and diffraction

Classical methods of structural analysis cannot be applied to liquid crystals because higher order reflections disappear during the transition from crystal to liquid crystal due to the reduction in long range orientational and translational correlations. However, in order to relate physical properties to the molecular architecture, it is essential to have information about molecular positions and orientations in the crystalline state as well as in the liquid crystalline state. In this work, the transition from crystalline to liquid crystalline phase is carefully monitored and the relationship between the original lattice and the new molecular positions found using electron diffraction. In addition to this, a new high resolution electron-microscopic technique is described in which the positions of molecules in the crystalline and the quenched discotic phase are directly imaged and the defects observed in the crystalline and LC phase compared and quantitatively analysed.     

Trace determination of Tl, Cu, Pb, Cd, and Zn in specimens of the limnic environment using isotope dilution mass spectrometry with thermal ionization

Within the framework of the German Environmental Specimen Bank program, Tl, Cu, Pb, Cd and Zn were determined in homogenized materials from the limnic environment using Isotope Dilution Mass Spectrometry (IDMS) with thermal ionization. The analytical procedures which were developed for the trace metal analysis of bioindicator and sediment samples are described in detail. Results obtained in bream, mussels (Dreissena polymorpha) and sediments of Lake Constance/Estuary of Constance in the sampling years 1981, 1985, 1988, 1990, 1992 and 1993 are discussed and compared with those of bream from the lakeland district of Born-hoeved/Lake Belau and from the River Saar as well as from reference materials.     

The influence of the liquid crystalline core geometry on the mesogenicity of novel chiral 2-(4-substituted-phenoxy)propanonitriles

The synthesis and characterization of seven novel (R)-2-(4-substituted-phenoxy)propanonitriles are described. The propanonitriles were prepared to evaluate their potential use as thermochromics and ferroelectric dopants, as well as to determine their twist sense properties. The materials exhibit smectic and chiral nematic phases of high thermal stability; the mesogenic behaviour of the nitriles is directly related to the type of two-ring core unit employed. The effects of the different molecular geometries and polarizabilities of the liquid crystalline cores on mesophase stability are discussed, particularly in relation to other members of this series. The chiral nematic phase of the propanonitriles is assigned as having a left-handed twist sense from contact preparation studies, and this is in agreement with rules relating absolute configuration and molecular structure to helical twist sense.     

The Properties of Voronoi Tessellations for 2D Ising Fluid Near the Second-Order Magnetic Phase Transition

The topological and geometrical properties of Voronoi cells generated for 2D fluid of hard disks with Ising-like spins near the second-order phase transition from the paramagnetic to ferromagnetic phase are described for different disk densities. The comparison with Voronoi cells generated for the random hard disk system is given.     

Distribution of melamine in polyester–melamine surface coatings cured under nonisothermal conditions

The influence of experimental cure parameters on the diffusion of reactive species in polyester–melamine thermoset coatings during curing has been investigated with X‐ray photoelectron spectroscopy and attenuated total reflectance Fourier transform infrared. The diffusion of melamine plays a vital role in the curing process and, therefore, in the ultimate properties of coatings. At a low (<20%) hexamethoxymethylmelamine (HMMM) crosslinker concentration, the matrix composition is uniform, but at high HMMM concentrations, excess HMMM rapidly segregates to the air–coating interface. The rate of migration is governed by the difference in the surface free energies of polyester and HMMM and the concentration gradient of HMMM between the bulk and the surface. An increased rate of energy absorption also increases the rate of migration of HMMM to the surface. A physical model has been proposed to explain this surface segregation phenomenon in terms of cocondensation and self‐condensation reactions. It suggests that an appropriate amount of melamine can be segregated on the surface and allowed to self‐condense to form a desired thickness of a melamine topcoat through the control of the binder composition and cure conditions. This technique can be implemented to apply a melamine topcoat during cure. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 83–91, 2004     

Synthesis and characterization of novel thermoresponsive‐co‐biodegradable hydrogels composed of N‐isopropylacrylamide,poly(L‐lactic acid), and dextran

A series of novel multifunctional hydrogels that combined the merits of both thermoresponsive and biodegradable polymeric materials were designed, synthesized, and characterized. The hydrogels were copolymeric networks composed of N‐isopropylacrylamide (NIPAAM) as a thermoresponsive component, poly(L‐lactic acid) (PLLA) as a hydrolytically degradable and hydrophobic component, and dextran as an enzymatically degradable and hydrophilic component. The chemical structures of the hydrogels were characterized by an attenuated total reflection–Fourier transform infrared spectroscopy (ATR–FTIR) technique. The hydrogels were thermoresponsive, showing a lower critical solution temperature (LCST) at approximately 32 °C, and their swelling properties strongly depended on temperature changes, the balance of the hydrophilic/hydrophobic components, and the degradation of the PLLA component. The degradation of the hydrogels caused by hydrolytic cleavage of ester bonds in the PLLA component was faster at 25 °C below the LCST than at 37 °C above the LCST, determined by the ATR–FTIR technique. Due to their multifunctional properties, the designed hydrogels show great potential for biomedical applications, including drug delivery and tissue engineering. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5054–5066, 2004     

Band structures in73Se

Excited states of⁷³Se have been investigated up to spin, 21/2 using techniques of in-beamγ-ray spectroscopy in connection with the⁷⁰Ge(α, n) reaction. Mean lifetimes of 12 levels have been determined applying Doppler-shift andγ-RF-methods. Five different bands have been identified that reflect a variety of different excitation modes. The decoupled 9/2⁺ band is likely to correspond to an oblate deformation while the 5/2⁺ band is interpreted as a strongly coupled prolate band built on the Nilsson configuration [422] 5/2⁺. The 3/2^? band is a strongly coupled band built on the [301] 3/2^} configuration.Nuclear reactions:⁷⁰Ge(α,n),E=14, 16, 18, 19, 20MeV; measuredE _γ,I _γ,σ(E _γ,θ),γγ-coin, linear polarization, DSA,γ(t).⁷⁵Se deduced levels,I, π, τ, δ(E2/M1), B(σλ). Enriched targets, Ge detectors.     

Validation of a solid-phase extraction high-performance liquid chromatographic assay for doxazosin.

The determination of doxazosin by high-performance liquid chromatography with fluorescence detection is described. Propanolol was used as the internal standard. Plasma samples were treated with methanol to precipitate the proteins. Doxazosin was isolated with C18 reversed-phase extraction columns. The determination limit is 1 ng/ml of plasma, while the extraction columns can be reused frequently. The method is applied to clinical trial samples.