Kinetic studies of the oxidative coupling of methane over the Mn/Na2WO4/SiO2 catalyst

Oxidative coupling of methane is a direct way to obtain C2 hydrocarbon,and Mn-Na-W/SiO2 catalyst is the most promising among all the catalysts.The 2%Mn/5%Na2WO4/SiO2 catalyst was prepared by the incipient wetness impregnation method.A 7-step heterogeneous reaction model of the oxidative coupling of methane to C2 hydrocarbons was conducted by co-feeding methane and oxygen at a total pressure of 1 bar over the catalyst.The kinetic measurements were carried out in a micro-catalytic fixed bed reactor.The kinetic data were obtained at the appropriate range of reaction conditions (4 kPa＜Po2 ＜20 kPa,20 kPa＜PCZH4 ＜80 kPa,800℃＜T＜900℃).The proposed reaction kinetic scheme consists of three primary and four consecutive reaction steps.The conversions of hydrocarbons and carbon oxides were evaluated by applying Langrnuir-Hinshelwood type rate equations.Power-law rate equation was applied only for the water-gas shift reaction.In addition,the effects of operating conditions on the reaction rate were studied.The proposed kinetic model can predict the conversion of methane and oxygen as well as the yield of C2 hydrocarbons and carbon oxides with an average accuracy of ±15%.     

New insights into ethene epoxidation on two oxidized Ag[111] surfaces

Reaction mechanisms and activation energies for the complete conversion of ethene to ethene epoxide on two recently characterized oxidized Ag{111} surfaces have been determined from density functional theory. On both surfaces, epoxidation proceeds through a two-step nonconcerted mechanism via an oxametallacycle intermediate. The key implications are that both surfaces are active and that epoxidation can take place over a wide O coverage regime.     

Crossover Peng-Robinson equation of state with introduction of a new expression for the crossover function

In this research, we use the original Peng-Robinson (PR) equation of state (EOS) for pure fluids and develop a crossover cubic equation of state which incorporates the scaling laws asymptotically close to the critical point and it is transformed into the original cubic equation of state far away from the critical point. The modified EOS is transformed to ideal gas EOS in the limit of zero density. A new formulation for the crossover function is introduced in this work. The new crossover function ensures more accurate change from the singular behavior of fluids inside the regular classical behavior outside the critical region. The crossover PR (CPR) EOS is applied to describe thermodynamic properties of pure fluids (normal alkanes from methane to n-hexane, carbon dioxide, hydrogen sulfide and R125). It is shown that over wide ranges of state, the CPR EOS yields the thermodynamic properties of fluids with much more accuracy than the original PR EOS. The CPR EOS is then used for mixtures by introducing mixing rules for the pure component parameters. Higher accuracy is observed in comparison with the classical PR EOS in the mixture critical region.     

Molecular dynamics studies of melting and solid-state transitions of ammonium nitrate

Molecular dynamics simulations are used to calculate the melting point and some aspects of high-temperature solid-state phase transitions of ammonium nitrate (AN). The force field used in the simulations is that developed by Sorescu and Thompson [J. Phys. Chem. A 105, 720 (2001)] to describe the solid-state properties of the low-temperature phase-V AN. Simulations at various temperatures were performed with this force field for a 4 x 4 x 5 supercell of phase-II AN. The melting point of AN was determined from calculations on this supercell with voids introduced in the solid structure to eliminate superheating effects. The melting temperature was determined by calculating the density and the nitrogen-nitrogen radial distribution functions as functions of temperature. The melting point was predicted to be in the range 445 +/- 10 K, in excellent agreement with the experimental value of 442 K. The computed temperature dependences of the density, diffusion, and viscosity coefficient for the liquid are in good agreement with experiment. Structural changes in the perfect crystal at various temperatures were also investigated. The ammonium ions in the phase-II structure are rotationally disordered at 400 K. At higher temperatures, beginning at 530 K, the nitrate ions are essentially rotationally unhindered. The density and radial distribution functions in this temperature range show that the AN solid is superheated. The rotational disorder is qualitatively similar to that observed in the experimental phase-II to phase-I solid-state transition.     

Fe3O4@SiO2 nanoparticles–functionalized Cu(II) Schiff base complex with an imidazolium moiety as an efficient and eco-friendly bifunctional magnetically recoverable catalyst for the Strecker synthesis in aqueous media at room temperature

Cu(II) Schiff base complex supported on Fe₃O₄@SiO₂ nanoparticles was employed as a magnetic nanocatalyst (nanocomposite) with a phase transfer functionality for the one-pot preparation of α-aminonitriles (Strecker reaction). The desired α-aminonitriles were obtained from the reaction of aromatic or aliphatic aldehydes, aniline or benzyl amine, NaCN, and 1.6 mol% of the catalyst in water at room temperature and good to excellent yields were obtained for all substrates. The catalyst was characterized analytically and instrumentally including Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric, nuclear magnetic resonance, energy-dispersive X-ray spectroscopy, inductively coupled plasma spectroscopy, vibrating-sample magnetometry analysis, dynamic light scattering, Brunauer–Emmett–Teller surface area, field emission scanning electron microscopy, and transmission electron microscopy analyses. The reaction mechanism was investigated, in which the performance of the catalyst as a phase transition factor seems to be probable. The catalyst showed high activity, high turnover frequency (TOF)s, significant selectivity, and fast performance toward the Strecker synthesis. The nanocatalyst can be readily and quickly separated from the reaction mixture with an external magnet and can be reused for at least seven successive reaction cycles without significant reduction in efficiency.     

Molecular dynamics simulation of NMR powder lineshapes of linear guests in structure I clathrate hydrates

We perform molecular dynamics simulations (up to 6 ns) for the structure I clathrate hydrates of linear molecules CS, CS(2), OCS, and C(2)H(2) in large cages at different temperatures in the stability range to determine the angular distribution and dynamics of the guests in the large cages. The long axes of linear guest molecules in the oblate large structure I clathrate hydrate cages are primarily confined near the equatorial plane of the cage rather than axial regions. This non-uniform spatial distribution leads to well-known anisotropic lineshapes in the solid-state NMR spectra of the guest species. We use the dynamic distribution of guest orientations in the cages during the MD simulations at different temperatures to predict the (13)C NMR powder lineshapes of the guests in the large cages. The length of the guests and intermolecular interactions of the guests in the water cages determine the angular distribution and the mobility of the guests in the sI large cages at different temperatures. At low temperatures the range of motion of the guests in the cages are limited and this is reflected in the skew of the predicted (13)C lineshapes. As the guest molecules reach the fast motion limit at higher temperatures, the lineshapes for CS, OCS, and C(2)H(2) are predicted to have the "standard" powder lineshapes of guest molecules.     

A double quantum (129)Xe NMR experiment for probing xenon in multiply-occupied cavities of solid-state inclusion compounds

A method is presented for detecting multiple xenon atoms in cavities of solid-state inclusion compounds using (129)Xe double quantum NMR spectroscopy. Double quantum filtered (129)Xe NMR spectra, performed on the xenon clathrate of Dianin's compound were obtained under high-resolution Magic-Angle Spinning (MAS) conditions, by recoupling the weak (129)Xe-(129)Xe dipole-dipole couplings that exist between xenon atoms in close spatial proximity. Because the (129)Xe-(129)Xe dipole-dipole couplings are generally weak due to dynamics of the atoms and to large internuclear separations, and since the (129)Xe Chemical Shift Anisotropy (CSA) tends to be relatively large, a very robust dipolar recoupling sequence was necessary, with the symmetry-based SR26 dipolar recoupling sequence proving appropriate. We have also attempted to measure the (129)Xe-(129)Xe dipole-dipole coupling constant between xenon atoms in the cavities of the xenon-Dianin's compound clathrate and have found that the dynamics of the xenon atoms (as investigated with molecular dynamics simulations) as well as (129)Xe multiple spin effects complicate the analysis. The double quantum NMR method is useful for peak assignment in (129)Xe NMR spectra because peaks arising from different types of absorption/inclusion sites or from different levels of occupancy of single sites can be distinguished. The method can also help resolve ambiguities in diffraction experiments concerning the order/disorder in a material.     

Molecular dynamics simulations of p-tert-butylcalix[4]arene with small guest molecules

Classical molecular dynamics simulations were used to study p-tert-butylcalix[4]arene inclusion compounds with xenon, nitrogen, hydrogen, methane, and sulfur dioxide guest molecules. The calixarene units were taken to be rigid and the intermolecular molecular interactions were modeled as a sum of the van der Waals interactions with parameters from the AMBER force field and electrostatic interactions. Simulations of the high-density alpha phase and low-density beta0 phase of p-tert-butylcalix[4]arene were used to test the force field. The predicted densities of the two phases were found to agree with experimental measurements at 173 K to within 5 %. Simulations were performed with guests placed inside the calixarene cages of the beta0 phase. Guest-host ratios of 1:1 to 1:4 were considered. Changes in the unit-cell volume and density of the phases with the addition of guest molecules and the inclusion energies for the guests were determined. Finally, the dynamics of the guest motion inside the cages were characterized by determining the root-mean-square displacements and velocity autocorrelation functions of the xenon and nitrogen guests.     

Non-isothermal pyrolysis of used lubricating oil and the catalytic effect of carbon-based nanomaterials on the process performance

Pyrolysis is a commonly used method for the recovery of used lubricating oil (ULO), which should be kinetically improved by a catalyst, due to its high level of energy consumption. In this research, the catalytic effects of carbon nanotube (CNT) and graphene nanoplatelets on the pyrolysis of ULO were studied through thermogravimetric analysis. First, the kinetic parameters of ULO pyrolysis including activation energy were calculated to be 170.12 and 167.01 kJ mol^?1 by FWO and KAS methods, respectively. Then, the catalytic effects of CNT and graphene nanoplatelets on pyrolysis kinetics were studied. While CNT had a negligible effect on the pyrolysis process, graphene nanoplatelets significantly reduced the temperature of maximum conversion during pyrolysis from 400 to 350 °C, due to high thermal conductivity and homogenous heat transfer in the pyrolysis process. On the other hand, graphene nanoplatelets maximized the rate of conversion of highly volatile components at lower temperatures (<?100 °C), which was mainly due to the high affinity of these components toward graphene nanoplatelets and also the effect of nanoplatelets’ edges which have free tails and can bond with other molecules. Moreover, graphene nanoplatelets decreased the activation energy of the conversion to 154.48 and 152.13 kJ mol^?1 by FWO and KAS methods, respectively.

     

Simulations of the solid, liquid, and melting of 1-n-butyl-4-amino-1,2,4-triazolium bromide

Molecular dynamics simulations are used to study the solid and liquid properties and to predict the melting point of 1-n-propyl-4-amino-1,2,4-triazolium bromide ([patr][Br]) using a force field based on the one developed by Canongia Lopes et al. (J. Phys. Chem. B 2004, 108, 2038) for dialkyl substituted imidazolium salts, which was modified by including terms from the general AMBER force field. Electrostatic charges for the intermolecular interactions were determined from gas-phase ab initio electron structure calculations of the triazolium cation. Simulations of the solid state at 100 K reproduced the experimental density to within 4%. Simulations from 100 K to the melting point and the liquid from 333 to 500 K were performed to determine the temperature dependence of the densities of the two phases. The structures of the solid and liquid phases are characterized with radial distribution functions, which show that there are strong spatial correlations among neighboring ion pairs in liquid [patr][Br]. The dynamic behavior of the ions in the liquid state is also studied by computing velocity autocorrelation functions and the mean-square displacements between the ions. The melting point is determined by simulating void-induced melting. Changes in the density, intermolecular energy, and Lindemann index are used as indicators of the melting transition. The computed melting point is 360 +/- 10 K, which is within 10% of the experimental value 333 K.