Preparation of Anion Exchange Membrane Based on Imidazolium Functionalized Poly(arylene ether ketone)

The authors presented a novel synthetic route for the imidazolium functionalized poly(arylene ether ketone)s, derived from an engineering plastics polymer, a poly(arylene ether ketone) with 3,3',5,5'-tetramethyl-4,4'-dihydroxybiphenyl moiety(PAEK-TM). The preparation of anion exchange membranes comprised converting benzylic methyl groups to bromomethyl groups by a radical reaction, followed by the functionalization of bromomethylated PAEK with alkyl imidazoles, i.e., methyl, butyl or vinyl imidazole. The structure of imidazolium functionalized PAEK was proved by ¹H NMR spectra. A class of flexible and tough membranes was then achieved by subsequent film-forming and anion exchange processes. The water uptake and hydroxide conductivities of membranes are comparable or superior to those of quaternary ammonium(QA) anion exchange membranes. This work demonstrated a new route for non-QA anion exchange membrane design, avoiding the chloromethylation reagent and precisely controlling the degree and location of imidazolium groups.     

城市垃圾与煤混烧的灰渣中重金属的特性分析

在0.15MWt循环流化床燃烧试验台上进行了城市垃圾与煤混烧试验,对焚烧后的灰渣中重金属的特性进行了研究。研究结果显示,重金属在焚烧产物中通常以不同的化合物形态存在,改变垃圾与煤混烧时的燃烧工况条件,可以改变重金属的化合物形态,从而改变重金属在灰渣中的分布;灰渣中重金属的浸出毒性低于危险废物浸出毒性鉴别标准中的限定值。     

顺气口服液中游离蒽醌的三波长分光光度法分析

三波长 -分光光度法测定了蒙药顺气口服液中游离蒽醌含量。不经显色有效地消除了背景干扰。方法的平均回收率为 (99.12± 1.79) % ,RSD=1.80 % (n=5 )。该法操作简便易行、具有较高的准确度及精密度 ,可作为制剂的含量测定方法。     

碳化铁催化剂的制备及其对CO加氢的催化活性

 以Fe2O3为原料,采用两种预处理方法制备了碳化铁催化剂. 结果表明,直接在CO气氛下进行碳化处理,或者以H2预还原后再用CO进行碳化处理均可以制备出碳化铁催化剂. 碳化温度是制备过程中的关键因素. 对于Fe2O3样品,较适宜的碳化温度是350 ℃,而对于添加了K助剂的样品,只有经H2预还原处理后再于350 ℃用CO碳化处理4 h才能将样品完全转化为Fe5C2. 在CO加氢的评价实验中,碳化铁催化剂表现出很高的催化活性,生成的烃类产物中主要是饱和烷 烃,未检测到乙烯的生成. 而在K改性的催化剂上反应产物中烯烃的含量明显提高.     

PP/EPDM共混体系的辐射效应

聚丙烯和三元乙丙橡胶(EPDM)的γ辐射效应及辐射后的聚丙烯熔体流动速率的测定表明,在限定空气中聚丙烯随着辐照剂量的增加,熔体流动速率急剧下降,而三元乙丙橡胶随辐射剂量的增加,凝胶含量逐渐增加。在20kGy的剂量辐照下,凝胶含量为22．7％,加入2％的三聚异氰酸三烯丙酯,在相同的剂量辐照下,凝胶含量达到68％。在低剂量下辐照对共混物的拉伸强度影响不大,对冲击强度有很大的影响。在20kGy的剂量辐照下,加入50％EPDM的聚丙烯的缺口冲击强度由1．95kJ／m^2提高到30kJ／m^2,维卡软化温度由85．9℃提高到97．0℃。     

溅射气压对碳硅氧薄膜透过率及光学带隙的影响

采用射频磁控溅射技术在玻璃基底和单晶硅片(100)上制备了碳硅氧(SiOC)薄膜,通过扫描电镜、X射线衍射、拉曼光谱、X射线光电子能谱及紫外可见透射光谱等技术手段对其进行了分析,研究了在不同溅射气压下所制备薄膜的组分、透过率及光学带隙.结果表明:随着溅射气压的增大,薄膜内部sp3键含量、透过率及光学带隙均随之增大,sp3键及其形成的宽带隙σ键对薄膜光学带隙有着较大影响.在溅射气压为3.0 Pa的条件下,薄膜光学带隙为2.67 eV.     

First measurement of the rho spectral function in high-energy nuclear collisions

We report on a precision measurement of low-mass muon pairs in 158 AGeV indium-indium collisions at the CERN SPS. A significant excess of pairs is observed above the yield expected from neutral meson decays. The unprecedented sample size of 360,000 dimuons and the good mass resolution of about 2% allow us to isolate the excess by subtraction of the decay sources. The shape of the resulting mass spectrum is consistent with a dominant contribution from pi+pi- -->rho -->mu+mu- annihilation. The associated space-time averaged spectral function shows a strong broadening, but essentially no shift in mass. This may rule out theoretical models linking hadron masses directly to the chiral condensate.     

Comb-shaped 2-Methylimidazolium Poly(arylene ether sulfone) Anion Exchange Membranes with High Alkaline Stability

A series of comb-shaped poly(arylene ether sulfone)s containing pendant 2-methyl-3-alkylimidazolitun group(ImPAES-Cx,x=1,6,10)was prepared and characterized as novel anion exchange membranes.These Im-PAES-Cx membranes were obtained by benzylic bromination and imidazolium functionalization.The characteristic nano-phase separation structure was formed in membranes with longer alkyl side chains,as confmned by small-angle X-ray scattering.The nano-phase separation structures endowed ImPAES-Cx membranes with improved ionic conductivity,dimensional stability(at least 60% decrease water uptake and swelling ratio at 60℃)and mechanical properties,together with excellent alkaline stability.Especially,ImPAES-C6 membranes possessed enhanced hydroxide conductivity and chemical stability simultaneously.These results suggest that it is a feasible strategy to introduce appropriate length of alkyl side chains into anion exchange membranes(AEMs)to improve the performance.     

Cu-ZnO-CeO2催化剂组成对CO2加H2合成甲醇性能的影响

采用并流沉淀法分别制备了CuO-CeO₂（物质的量比为5：1）、CuO-ZnO（物质的量比为5：4）、CuO-ZnO-CeO₂（物质的量比为5：4：1）三组目标催化剂,通过X射线衍射（XRD）、氢气升温还原（H₂-TPR）、CO₂程序升温脱附（CO₂-TPD）、氮气吸附-脱附、X射线光电子能谱（XPS）、N₂O滴定表征技术对催化剂的物化性能进行了测试,并在高温高压微催化反应器中对催化剂进行活性评价。研究了CuO-ZnO-CeO₂组成对CO₂加氢合成甲醇的影响。结果表明,与二组分催化剂相比较,三组分CuO-ZnO-CeO₂催化剂物化性能及催化活性发生了很大变化,催化剂表面碱性位增强,热稳定性增强,CuO颗粒粒径变小,铜分散度以及氧空位浓度提高,最终催化活性显著提高。其中,CuO-ZnO-CeO₂催化剂中,CuO颗粒粒径为8.2nm,铜的比表面积为68.4m²/g,铜分散度为7.19%,甲醇的选择性和收率分别为48.6%和0.057mmol/（g·min）,催化剂活性较好。     

Hollow-glass-microsphere-based Biphenyl Epoxy Resin Composite with Low Dielectric Contant

In this study, rigid 4,4'-diglycidyl(3,3',5,5'-tetramethylbiphenyl) epoxy(TMBP)-based composites were developed by the incorporation of varying percentages of commercial hollow glass microspheres(HGMs, QH-450) into the TMBP resin used for electronic packaging. The thermal and mechanical properties as well as the morphology of all the composites were characterized, and dielectric properties were characterized by advanced analytical techniques. The results reveal that a series of TMBP/QH-450 composites exhibits higher initial degradation temperatures(T_d,5%>300℃), and the residual char and glass transition temperature were clearly improved with QH-450 loading. In addition, all epoxy composites exhibited a lower dielectric constant ranging from 3.74 to 3.06 at 1.2 MHz because the lower dielectric properties of the inert gas used as the core of the QH-450 decreased molecule polarity. Hence, this developed TMBP/QH450 system demonstrates potential applications in electronic packaging.