Continuous solid-phase extraction method for the determination of amines in human urine following on-line microwave-assisted acid hydrolysis

Humans are exposed to endogenous or exogenous formation of aromatic amines (AAs) and N-nitrosamines (NAms), which are considered to be potent carcinogens. The objective of this study was to monitor AAs and NAms in human urine to obtain a way to assess exposure. However, while NAms can be directly detected in urine samples, AAs require hydrolysis to convert their conjugates into free amines. A semiautomatic flow-base method is proposed for the simultaneous determination of aliphatic and aromatic NAms, anilines and chloroanilines in human urine in one analytical run. Conjugated AAs are released from urine by on-line microwave-assisted acid hydrolysis without degradation of NAms; all amines were then preconcentrated using solid-phase extraction. Separation/determinations are carried out by gas chromatography and mass spectrometry operating in selected ion monitoring mode. The method is fast (∼15 min for 25 mL of sample) and provides low limits of detection (from 2 to 26 ng/L) with good precision (relative standard deviation within and between days less than 7%). Finally, the proposed method was successfully applied to check AAs and NAms in the human urine of exposed and unexposed researchers. The kinetics of amine excretion in the urine of the researchers exposed is calculated after termination of the exposure and shows half-life times between 1.3 and 2.1 h, and that the dosage absorbed was eliminated within 6 h after exposure.     

3-MCPD in food other than soy sauce or hydrolysed vegetable protein (HVP)

This review gives an overview of current knowledge about 3-monochloropropane-1,2-diol (3-MCPD) formation and detection. Although 3-MCPD is often mentioned with regard to soy sauce and acid-hydrolysed vegetable protein (HVP), and much research has been done in that area, the emphasis here is placed on other foods. This contaminant can be found in a great variety of foodstuffs and is difficult to avoid in our daily nutrition. Despite its low concentration in most foods, its carcinogenic properties are of general concern. Its formation is a multivariate problem influenced by factors such as heat, moisture and sugar/lipid content, depending on the type of food and respective processing employed. Understanding the formation of this contaminant in food is fundamental to not only preventing or reducing it, but also developing efficient analytical methods of detecting it. Considering the differences between 3-MCPD-containing foods, and the need to test for the contaminant at different levels of food processing, one would expect a variety of analytical approaches. In this review, an attempt is made to provide an up-to-date list of available analytical methods and to highlight the differences among these techniques. Finally, the emergence of 3-MCPD esters and analytical techniques for them are also discussed here, although they are not the main focus of this review.     

Determination of Hg and Pb in compact fluorescent lamp by slurry sampling inductively coupled plasma optical emission spectrometry

Mercury and lead were determined in an extraction solution applied to compact fluorescent lamps by axial view inductively coupled plasma optical emission spectrometry (ICP OES). The solution contained 50% v/v HNO₃ and 10% v/v H₂O₂. The compact fluorescent lamps were treated by removing the socket and breaking the rest of the lamp inside the solution, followed by placing the mixture in an ultrasonic bath for 1 h. The mixture was filtrated in a coarse paper filter and the resulting extraction slurry was analyzed. The determination of Pb in the slurry required calibration by the analyte addition technique, while for Hg, external calibration was adequate. The quantification limits (10 s, n = 7), for Hg (194.164 nm) and Pb (220.353 nm) were, respectively, 10 and 30 µg per lamp. Analysis of spiked samples demonstrated reasonable accuracy of the method, with recoveries in the range from 99 to 120% for Hg and from 91 to 107% for Pb. Fifteen analyzed samples showed Hg masses per lamp in the range from 1.6 to 27 mg, and six samples were above the limit allowed by the European Community that is 5 mg per compact lamp. The values for Pb were between 0.07 and 0.75 mg per lamp. By filtrating the slurry in a membrane filter, and analyzing the resulting solution, it was found that all Hg was extracted to the liquid phase of the slurry, while a fraction of about 40% m/v of Pb is retained in the solid particles. The lamp cover glass, after extraction of the phosphor layer, was also analyzed for Hg and Pb. The concentration of Hg in the glass is quite low; however, the Pb content is high.     

Development of an analytical methodology to quantify melamine in milk using micellar liquid chromatography and validation according to EU Regulation 2002/654/EC

Melamine is a toxic triazine, illegally used as an additive in milk to apparently increase the amount of protein. A chromatographic procedure using a C18 column and a micellar mobile phase of sodium dodecyl sulphate (0.05 M) and propanol (7.5%), buffered at pH 3, and a detection set by absorbance at 210 nm, was reported for the resolution and quantification of melamine in liquid and powdered milk samples. In this work, samples were diluted with a SDS solution and were directly injected, thus avoiding long extraction and experimental procedures. Melamine was eluted in nearly 9.3 min without overlapping the protein band or other endogeneous compounds. The optimal mobile phase composition was taken using a chemometrical approach that considers the retention factor, efficiency and peak shape. Validation was performed following the European Commission's indications (European Decision 2002/657/EC), and the main analytical parameters studied were: linearity (0.02-100 ppm; r² = 0.999), limit of detection (5 ppb), intra- and inter-day precision (R.S.D. <7.6% and <9.7%, respectively) and robustness (R.S.D. <7.4% for retention time and <5.0% for area). Sensitivity was adequate to detect melamine under the safety limits proposed by the US FDA. Finally, recoveries for several milk samples were found in the 85-109% range.     

Click assembly of dye-functionalized octasilsesquioxanes for highly efficient and photostable photonic systems

New hybrid organic–inorganic dyes based on an azide‐functionalized cubic octasilsesquioxane (POSS) as the inorganic part and a 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BDP) chromophore as the organic component have been synthesized by copper(I)‐catalyzed 1,3‐dipolar cycloaddition of azides to alkynes. We have studied the effects of the linkage group of BDP to the POSS unit and the degree of functionalization of this inorganic core on the ensuing optical properties by comparison with model dyes. The high fluorescence of the BDP dye is preserved in spite of the linked chain at its meso position, even after attaching one BDP moiety to the POSS core. The laser action of the new dyes has been analyzed under transversal pumping at 532 nm in both the liquid phase and when incorporated into solid polymeric matrices. The monosubstituted new hybrid dye exhibits high lasing efficiency of up to 56 % with high photostability, with its laser output remaining at the initial value after 4×10⁵ pump pulses in the same position of the sample at a repetition rate of 30 Hz. However, functionalization of the POSS core with eight fluorophores leads to dye aggregation, as quantum mechanical simulation has revealed, worsening the optical properties and extinguishing the laser action. The new hybrid systems based on dye‐linked POSS nanoparticles open up the possibility of using these new photonic materials as alternative sources for optoelectronic devices, competing with dendronized or grafted polymers.     

Potent "clicked" MMP2 inhibitors: synthesis, molecular modeling and biological exploration

A new series of MMP2 inhibitors is described, following a fragment-based drug design approach. One fragment containing an azide group and a well known hydroxamate Zinc Binding Group in a α-sulfone, α-tetrahydropyrane scaffold, has been synthesized. Water-LOGSY, STD and competition-STD experiments indicate that this fragment binds to the active site of the enzyme. A click chemistry reaction was used to connect the azide to lipophilic alkynes selected to interact selectively with the S1' subunit of MMP2, as shown by docking and molecular dynamic experiments of the designed compounds. The most potent compounds 18 and 19 displayed an IC(50) of 1.4 and 0.3 nM against MMP2 respectively, and showed negligible activity towards MMP1 and MMP7, two metalloproteinases which have a shallow S1' subsite. Compound 18 also showed a promising selectivity profile against some antitarget metalloproteinases, such as MMP8, and considerably less activity against MMP14 (IC(50) = 65 nM), and MMP9 (IC(50) = 98 nM), other MMPs characterized by having a deep S1' pocket and, therefore, more similar to MMP2.     

Chemistry of 11-vertex rhodathiaboranes: reactions with monodentate phosphines

The reaction of [8,8-(PPh(3))(2)-nido-8,7-RhSB(9)H(10)] (1) with PR(3) in a 1:2 ratio affords mixtures that contain the mono-substituted bis-PR(3)-ligated rhodathiaboranes [8,8-(PPh(3))(L)-nido-8,7-RhSB(9)H(10)] [L = PMe(2)Ph (5), PMe(3) (6)] and the corresponding tris-PR(3)-ligated compounds [8,8,8-(L)(3)-nido-8,7-RhSB(9)H(10)] [L = PMe(2)Ph (7), PMe(3) (8)]. These latter species are more conveniently prepared from the reaction of 1 with three equivalents of the monodentate phosphines, PMe(2)Ph and PMe(3). Reaction between 1 and PMePh(2) in a 1:2 ratio yields the disubstituted rhodathiaborane [8,8-(PMePh(2))(2)-nido-8,7-RhSB(9)H(10)] (4), whereas the use of three equivalents of phosphine leads to the formation of B-ligated eleven-vertex [8,8,8-(PMePh(2))(2)(H)-nido-8,7-RhSB(9)H(9)-9-(PMePh(2))] (9). Compounds 4-9 have been characterized by NMR spectroscopy, and the structures of 8 and 9 confirmed by X-ray diffraction analyses. The characterization of the cluster compounds has been aided by the use of DFT calculations on some of the species. Variable-temperature NMR studies have demonstrated a lability of the PMePh(2) ligands in compounds 4 and 9, providing mechanistic insights about the ligand substitutional chemistry in these eleven-vertex rhodathiaboranes.     

用于甲烷分解和甲烷二氧化炭重整的碳材料催化剂研究进展

The decomposition and CO2 reforming of methane,respectively,are promising alternatives to industrial steam methane reforming. In recent years,research has been focused on the development of catalysts that can operate without getting deactivated by carbon deposition,where,in particular,carbon catalysts have shown positive results. In this work,the role of carbon materials in heterogeneous catalysis is assessed and publications on methane decomposition and CO2 reforming of methane over carbon materials are reviewed. The influence of textural properties(BET surface area and micropore volume,etc.) and oxygen surface groups on the catalytic activity of carbon materials are discussed. In addition,this review examines how activated carbon and carbon black catalysts,which are the most commonly used carbon catalysts,are deactivated. Characteristics of the carbon deposits from methane are discussed and the influence of the reactivity to CO2 of fresh carbon and carbonaceous deposits for high and steady conversion during CO2 reforming of CH4 are also considered.