Spectrophotometric Label-Free Determination of Lead Using Thiol-Functionalized Gold Nanoparticles

A method for the determination of lead is described using thiol-functionalized gold nanoparticle. The detection method is based on the prevention of thiol-induced aggregation of gold nanoparticles by lead. Among six thiols, e.g., 4-mercapto-1-butanol, meso-2, 3-dimercaptosuccinic acid, mercaptosuccinic acid, 6-mercapto-1-hexanol, 4-(methylthio)-1-butanol, 1-propanethiol, four (4-mercapto-1-butanol, 6-mercapto-1-hexanol, 4-(methylthio)-1-butanol and 1-propanethiol) induced the aggregation of the gold nanoparticles which was measured by the change in absorbance at 520 and 650?nm. Prior incubation of the gold nanoparticles with lead decreased the 4-(methylthio)-1-butanol-induced aggregation of gold nanoparticles in a dose-dependent manner. A linear inverse relationship between the logarithmic concentration of lead and the ratio of absorbance at 650 to 520 was noted. The method has a dynamic range from 10?nM to 100?µM. However, metals such as mercury and chromium were more effective in comparison with lead in preventing the 4-methylthio-1-butanol-induced aggregation of gold nanoparticles. The method can be used for assessing the heavy metal load in water samples.     

An extractive pellet fluorimetric determination of trace uranium in thorium rich samples

An extractive pellet fluorimetry determination of trace uranium in thorium rich samples has been developed. This is based upon a solvent extraction system which completely separates both the elements uranium and thorium from each other. Thorium as a neutral complex with 2,3-dihydroxynaphthalene at pH 4–6 is extracted into ethylacetate and then uranium-2,3-dihydroxynaphthalene anionic complex is extracted into another batch of ethylacetate at pH 11–12 under the influence of a counter cation, cetyltrimethylammonium ion. This method has been applied for the determination of trace uranium in synthetic nuclear grade thorium oxide and thorium rich mineralized rock with high degree of accuracy and precision.     

Biological aspects of Schiff base–metal complexes derived from benzaldehydes: an overview

Schiff bases are stable imines containing C=N, where N is bonded to an alkyl or aryl group, but not with hydrogen and are prepared by condensation of aliphatic or aromatic primary amine with carbonyl compounds. They have the general formula R₁R₂C?=?NR₃, where R₃?≠?H. The presence of the basic donor N atom and the stability of the imine function render Schiff bases as the most favored ligands that have the ability to stabilize metal ions in different oxidation states. The chelating environment in a Schiff base profoundly influences the electron distribution in the coordination sphere of metal in a complex and thereby regulates the property of the compounds in a big way. The structural diversity in some of the metal complexes with multidentate Schiff base ligands has triggered a wide range of applications of this class of compounds in sensors, catalysis, biology, medicines, and photonics. This review compiles the synthesis and biological activities (antimicrobial, antioxidant, anticancer, antitubercular, DNA interaction studies) of benzaldehyde-based Schiff bases and their metal complexes.     

Differential content of secondary metabolites in diploid and tetraploid cytotypes of Siegesbeckia orientalis L.

Siegesbeckia orientalis L. is an annual herb widely distributed throughout the world and has many medicinal properties. In Chinese traditional system, it is popularly known as Xi-Xian and used for its anti-inflammatory properties. In the present study, two cytotypes (diploid and tetraploid) have been investigated for their secondary metabolites. The different plant parts have been explored in terms of total phenolics, total flavonoids, DPPH radical scavenging acitivity and total antioxidant capacity. Out of different plant parts, leaves have the maximum amount of secondary metabolites and antioxidant potential. HPTLC technique has been applied to quantify six marker compounds in the two cytotypes. Tetraploid cytotype has been compared with diploid cytotype, which shows that tetraploid has the maximum amount of studied secondary metabolites with high antioxidant potential.     

Spectroscopic studies of catanionic reverse microemulsion: correlation with the superactivity of horseradish peroxidase enzyme in a restricted environment

Catanionic microemulsions formed by dodecyltrimethylammonium bromide (DTAB), sodium dodecyl sulfate (SDS), n-hexanol, dodecane, and citrate buffer have been characterized by using dynamic light scattering (DLS) and spectroscopic studies. While the DLS measurements provide information about the hydrodynamic diameters of the microemulsion droplets formed upon variation of the constituents, steady-state and time-resolved fluorescence emission experiments probe the polarity and the dynamics of the trapped solvent pool inside of the microemulsion droplets of nanometer dimension. In addition, time-resolved fluorescence anisotropy shows the rigidity of the confined solvent pool as well as the coupling between the motion of a solute and those of the solvent molecules. The results obtained from the DLS and those from the steady-state and time-resolved fluorescence emission studies have been found to correlate well with the superactivity of horseradish peroxidase enzyme in the catanionic microemulsions. Subsequently, the time-zero estimate for the dynamic Stokes shift in these microemulsions reveals that approximately 50% of the total solvent dynamical response is missed due to the limited time resolution employed in our experiments. The amplitude of the missing portion is similar to what has been observed recently for nanoscopic water by Fayer and co-workers (Piletic, I. R.; Tan, H.-S.; Fayer, M. D. J. Phys. Chem. B 2005, 109, 21273).     

Gram level synthesis of lead-free solder in the nanometer length scale obtained from tin and silver compounds using silicone oil

A straightforward route to gram level synthesis of a pure phase of the Sn-Ag nanoalloy in an eutectic composition (Sn/Ag 96.5:3.5) in silicone oil is reported. The composition, morphology, and microstructure of the alloy were fully characterized. In a mixture of ethylene glycol and silicone oil, direct reduction of Sn(II) acetate and Ag(I) nitrate gave the Sn-Ag nanoalloy. The nanoalloy disintegrates by sonication and reforms by heating, leading to smaller particles with a melting point as low as 128 degrees C.     

Co-Catalyzed Metal-Ligand Cooperative Approach for N-alkylation of Amines and Synthesis of Quinolines via Dehydrogenative Alcohol Functionalization

Herein we report a cobalt-catalyzed sustainable approach for C−N cross-coupling reaction between amines and alcohols. Using a well-defined Co-catalyst 1 a bearing 2-(phenyldiazenyl)-1,10-phenanthroline ligand, various N-alkylated amines were synthesized in good yields. 1 a efficiently alkylates diamines producing N, N′-dialkylated amines in good yields and showed excellent chemoselectivity when oleyl alcohol and β-citronellol, containing internal carbon-carbon double bond were used as alkylating agents. 1 a is equally compatible with synthesizing N-heterocycles via dehydrogenative coupling of amines and alcohols. 1H-Indole was synthesized via an intramolecular dehydrogenative N-alkylation reaction, and various substituted quinolines were synthesized by coupling of 2-aminobenzyl alcohol and secondary alcohols. A few control reactions and spectroscopic experiments were conducted to illuminate the plausible reaction mechanism, indicating that the 1 a -catalyzed N-alkylation proceeds through the borrowing hydrogen pathway. The coordinated arylazo ligand participates actively throughout the reaction; the hydrogen eliminated during dehydrogenation of alcohols was set aside in the ligand backbone and subsequently gets transferred in the reductive amination step to imine intermediates yielding N-alkylated amines. On the other hand, 1 a -catalyzed quinoline synthesis proceeds through dehydrogenation followed by successive C−C and C−N coupling steps forming H₂O₂ as a by-product under air.     

Anisotropic string cosmological model in Brans–Dicke theory of gravitation with time-dependent deceleration parameter

We discuss a spatially homogeneous and anisotropic string cosmological models in the Brans–Dicke theory of gravitation. For a spatially homogeneous metric, it is assumed that the expansion scalar θ is proportional to the shear scalar σ. This condition leads to A = kB^m, where k and m are constants. With these assumptions and also assuming a variable scale factor a = a(t), we find solutions of the Brans–Dicke field equations. Various phenomena like the Big Bang, expanding universe, and shift from anisotropy to isotropy are observed in the model. It can also be seen that in early stage of the evolution of the universe, strings dominate over particles, whereas the universe is dominated by massive strings at the late time. Some physical and geometrical behaviors of the models are also discussed and observed to be in good agreement with the recent observations of SNe la supernovae.     

Boronic acid-based bipyridinium salts as tunable receptors for monosaccharides and alpha-hydroxycarboxylates

Several novel diboronic acid-substituted bipyridinium salts were prepared and, using a fluorescent reporter dye, were tested for their ability to selectively bind various monosaccharides and alpha-hydroxycarboxylates in an aqueous medium. The fluorescence sensing mechanism relies on the formation of a ground-state charge-transfer complex between the dye and bipyridinium. An X-ray crystal structure of this complex is described herein. Glucose selectivity over fructose and galactose was achieved by designing the bipyridinium-based receptors to be capable of attaining a 1:1 receptor/substrate stoichiometry via cooperative diboronic acid binding.