Preparation d'esters par deshydrogenation d'alcools primaires en phase liquide catalysee par l'oxyde de cuivre - observations preliminaires

Linear primary alcohols with at least 7 carbon atoms are quite quantitatively transformed in esters, by CuO, at temperatures > 170°, without air in liquid phase. Preponderant influence of carbon in position 2 is evidenced. In the same conditions lactones are obtained from diols, and benzylic alcohols undergoes, by hydride transfer, a disproportionation into toluene, benzaldehyde and water.     

Synthesis,Characterization and Magnetic Properties of New Dinuclear Copper(II) Complexes with N,N′‐Disubstituted Dithiooxamides derived from α‐Amino Acids

Four new dinuclear copper(II) complexes have been synthesized and have the general formula [Cu₂(L)(H₂O)₂], where L = GLYDTO [N,N′‐bis(carboxymethyl)dithiooxamide], ALADTO [N,N′‐bis(carboxyethyl)dithiooxamide], VALDTO [N,N′‐bis(1‐carboxy‐2‐methylpropyl)dithiooxamide] and LEUDTO [N,N′‐bis(1‐carboxy‐3‐methylbutyl)dithiooxamide]. The complexes were characterized by elemental analysis as well as by IR, electronic and EPR spectroscopy. These techniques provided evidence for the presence of the CuNO₂S chromophore. Magnetic susceptibility measurements on all the complexes in the range 4–300 K show the existence of a dominant antiferromagnetic interaction with ?J values greater than 300 cm^?1. Thermal decomposition behaviour of the complexes was studied by thermogravimetry.     

Synthesis of new thiazole analogues of pyochelin, a siderophore of Pseudomonas aeruginosa and Burkholderia cepacia. A new conversion of thiazolines into thiazoles

Three pyochelin analogues and their methyl esters all containing a thiazole ring have been synthesised from the same Weinreb amide key intermediate. One of these analogues called HPTT-COOH, a molecule released in the course of pyochelin and yersiniabactin biosynthesis, was efficiently synthesised using a new base induced conversion of the key compound 2′-(2-hydroxyphenyl)-2′-thiazoline-4′-(N-methoxy,N-methyl) carboxamide into 2′-(2-hydroxyphenyl)-2′-thiazole-4′-(N-methoxy,N-methyl) carboxamide.     

Direct zonal liquid chromatographic method for the kinetic study of actinomycin-DNA binding

The binding of an anticancer drug (actinomycin D or ACTD) to double-stranded DNA (dsDNA) was studied by means of high-performance liquid chromatography (HPLC). ACTD is an antitumor antibiotic containing one chromophore group and two pentapeptidic lactone cycles that binds dsDNA. Incubations of ACTD with DNA were performed at physiological pH. The complexed and free ligand concentrations of the mixture were quantified at 440 nm from their separation on a size-exclusion chromatographic (SEC) column using the same buffer for the elution and the sample incubation. The DNA and the ACTD-DNA complexes were eluted at the column exclusion volume while the ligand was retained on the support. An apparent binding curve was obtained by plotting the amount emerging at the exclusion column volume against that eluted at free ACTD retention volume. A dissociating effect was evidenced and the binding parameters were significantly different from those obtained at equilibrium by visible absorbance titration. The equilibrium binding parameters determined by absorption spectroscopy were used as starting data in the numerical simulations of the chromatographic process. The results showed a strong dependency of the apparent binding parameters on the reaction kinetics. Finally the comparison of the apparent binding curve obtained from the HPLC experiments and from the numerical simulations permitted an evaluation of the dissociation rate constant (kd = 0.004 s(-1)).     

Recent Advances in Electropolymerized Conducting Polymers in Amperometric Biosensors

Conducting electroactive polymers (CPs) are materials discovered just over 20 years ago which have aroused considerable interest on account of their electronic conducting properties and unique chemical and biochemical properties. Consequently, they have numerous (bio)analytical and technological applications. CPs are easily synthesized and deposited onto the conductive surface of a given substrate from monomer solutions by electrochemical polymerization with precise electrochemical control of their formation rate and thickness. Coating electrodes with CPs under mild conditions opens up enormous possibilities for the immobilization of biomolecules and bioaffinity or biorecognizing reagents, the improvement of their electrocatalytic properties, rapid electron transfer and direct communication to produce a range of analytical signals and new analytical applications. Co-immobilization of other molecules (enzymatic co-factors or charge-transfer mediators) by entrapment within electropolymerized films or by covalent binding on these films permits straightforward fabrication of reagentless biosensors. The characteristics of CPs and their uses, mainly in amperometric biosensors, are reviewed. The most recent applications and lines of research related to CP films are summarized in the different sections of the paper, and probable future trends are discussed.     

Stereoselective synthesis of trans-2,3-disubstituted pyrrolidines via addition to N-acyliminium ions

An efficient and stereoselective synthesis of trans-2,3-disubstituted pyrrolidines is described. The intermolecular alkylation of racemic N-acyliminium ions generated in situ from the corresponding 3-substituted lactams proceeds stereoselectively and in high yield.     

Super/subcritical fluid chromatography chiral separations with macrocyclic glycopeptide stationary phases

The chiral recognition capabilities of three macrocyclic glycopeptide chiral selectors, namely teicoplanin (Chirobiotic T), its aglycone (Chirobiotic TAG) and ristocetin (Chirobiotic R), were evaluated with supercritical and subcritical fluid mobile phases. A set of 111 chiral compounds including heterocycles, analgesics (nonsteroidal antiinflamatory compounds), beta-blockers, sulfoxides, N-protected amino acids and native amino acids was separated on the three chiral stationary phases (CSPs). All separations were done with an outlet pressure regulated at 100 bar, 31 degrees C and at 4 ml/min. Various amounts of methanol ranging from 7 to 67% (v/v) were added to the carbon dioxide along with small amounts (0.1 to 0.5%, v/v) of triethylamine and/or trifluoroacetic acid. The Chirobiotic TAG CSP was the most effective closely followed by the Chirobiotic T column. Both columns were able to separate, partially or fully, 92% of the enantiomers of the compound set. The ristocetin chiral selector could partially or baseline resolve only 60% of the enantiomers tested. All separations were done in less than 15 min and 70% were done in less than 4 min. The speed of the separations is the main advantage of the use of SFC compared to normal-phase HPLC. In addition, SFC is advantageous for preparative separations with easy solute recovery and solvent disposal.     

Automated linkage of proteins and payloads producing monodisperse conjugates

Controlled protein functionalization holds great promise for a wide variety of applications. However, despite intensive research, the stoichiometry of the functionalization reaction remains difficult to control due to the inherent stochasticity of the conjugation process. Classical approaches that exploit peculiar structural features of specific protein substrates, or introduce reactive handles via mutagenesis, are by essence limited in scope or require substantial protein reengineering. We herein present equimolar native chemical tagging (ENACT), which precisely controls the stoichiometry of inherently random conjugation reactions by combining iterative low-conversion chemical modification, process automation, and bioorthogonal trans-tagging. We discuss the broad applicability of this conjugation process to a variety of protein substrates and payloads.

Controlled protein functionalization holds great promise for a wide variety of applications.

Applications of protein conjugates are limitless, including imaging, diagnostics, drug delivery, and sensing.^1–4 In many of these applications, it is crucial that the conjugates are homogeneous.⁵ The site-selectivity of the conjugation process and the number of functional labels per biomolecule, known as the degree of conjugation (DoC), are crucial parameters that define the composition of the obtained products and are often the limiting factors to achieving adequate performance of the conjugates. For instance, immuno-PCR, an extremely sensitive detection technique, requires rigorous control of the average number of oligonucleotide labels per biomolecule (its DoC) in order to achieve high sensitivity.⁶ In optical imaging, the performance of many super-resolution microscopy techniques is directly defined by the DoC of fluorescent tags.⁷ For therapeutics, an even more striking example is provided by antibody–drug conjugates, which are prescribed for the treatment of an increasing range of cancer indications.⁸ A growing body of evidence from clinical trials indicates that bioconjugation parameters, DoC and DoC distribution, directly influence the therapeutic index of these targeted agents and hence must be tightly controlled.⁹Standard bioconjugation techniques, which rely on nucleophile–electrophile reactions, result in a broad distribution of different DoC species (Fig. 1a), which have different biophysical parameters, and consequently different functional properties.¹⁰Open in a separate windowFig. 1Schematic representation of the types of protein conjugates.To address this key issue and achieve better DoC selectivity, a number of site-specific conjugation approaches have been developed (Fig. 1b). These techniques rely on protein engineering for the introduction of specific motifs (e.g., free cysteines,¹¹ selenocysteines,¹² non-natural amino acids,^13,14 peptide tags recognized by specific enzymes^15,16) with distinct reactivity compared to the reactivity of the amino acids present in the native protein. These motifs are used to simultaneously control the DoC (via chemo-selective reactions) and the site of payload attachment. Both parameters are known to influence the biological and biophysical parameters of the conjugates,¹¹ but so far there has been no way of evaluating their impact separately.The influence of DoC is more straightforward, with a lower DoC allowing the minimization of the influence of payload conjugation on the properties of the protein substrate. The lowest DoC that can be achieved for an individual conjugate is 1 (corresponding to one payload attached per biomolecule). It is noteworthy that DoC 1 is often difficult to achieve through site-specific conjugation techniques due to the symmetry of many protein substrates (e.g., antibodies). Site selection is a more intricate process, which usually relies on a systematic screening of conjugation sites for some specific criteria, such as stability or reactivity.¹⁷Herein, we introduce a method of accessing an entirely new class of protein conjugates with multiple conjugation sites but strictly homogenous DoCs (Fig. 1c). To achieve this, we combined (a) iterative low conversion chemical modification, (b) process automation, and (c) bioorthogonal trans-tagging in one workflow.The method has been exemplified for protein substrates, but it is applicable to virtually any native bio-macromolecule and payload. Importantly, this method allows for the first time the disentangling of the effects of homogeneous DoC and site-specificity on conjugate properties, which is especially intriguing in the light of recent publications revealing the complexity of the interplay between payload conjugation sites and DoC for in vivo efficacy of therapeutic bioconjugates.¹⁸ Finally, it is noteworthy that this method can be readily combined with an emerging class of site-selective bioconjugation reagents to produce site-specific DoC 1 conjugates, thus further expanding their potential for biotechnology applications.¹⁹     

Stéréosélectivité et régiosélectivité de la réduction des cyclopropènes-2,3 et méthylène-2 cyclopropanes fonctionalisés en position 1

Reduction of 2 cyclopropenyl esters and alcohols with lithium aluminium hydride is selective; at low temperatures (0°) the double bond is not reduced, but at higher temperatures (65°) the reduction is complete and only the cyclopropylmethanol is obtained. The reduction of the double bond is regioselective (the most stable carbanion is formed) and stereospecific (the hydride attack on the double bond occurs cis to the functional group). This stereospecificity can be explained through the initial formation of an alkoxylaluminium hydride followed by an intramolecular reduction of the double bond. Similar results have been obtained in the reduction of functionalised methylenecyclopropanes.