Correlation between superhydrophobicity and the power spectral density of randomly rough surfaces

We show experimentally and analytically that for single-valued, isotropic, homogeneous, randomly rough surfaces consisting of bumps randomly protruding over a continuous background, superhydrophobicity is related to the power spectral density of the surface height, which can be derived from microscopy measurements. More precisely, superhydrophobicity correlates with the third moment of the power spectral density, which is directly related to the notion of Wenzel roughness (i.e., the ratio between the real area of the surface and its projected area). In addition, we explain why randomly rough surfaces with identical root-mean-square roughness values may behave differently with respect to water repellence and why roughness components with wavelength larger than 10 μm are not likely to be of importance or, stated otherwise, why superhydrophobicity often requires a contribution from submicrometer-scale components such as nanoparticles. The analysis developed here also shows that the simple thermodynamic arguments relating superhydrophobicity to an increase in the sample area are valid for this type of surface, and we hope that it will help researchers to fabricate efficient superhydrophobic surfaces based on the rational design of their power spectral density.     

Development and evaluation of gas and liquid chromatographic methods for the analysis of fatty amines

In contrast to the plethora of publications on the separation of fatty acids, analogous studies involving fatty amines are scarce. A recently introduced ionic‐liquid‐based capillary column for GC was used to separate trifluoroacetylated fatty amines focusing on the analysis of a commercial sample. Using the ionic liquid column (isothermal mode at 200°C) it was possible to separate linear primary fatty amines from C₁₂ to C₂₂ chain length in less 25 min with MS identification. The log of the amine retention factors are linearly related to the alkyl chain length with a methylene selectivity of 0.117 kcal/mol for the saturated amines and 0.128 kcal/mol for the mono‐unsaturated amines. The sp² selectivity for unsaturated fatty amines also could be calculated as 0.107 kcal/mol for the ionic liquid column. The commercial sample was quantified by GC with flame ionization detection (FID). An LC method also was developed with a reversed phase gradient separation using acetonitrile/formate buffer mobile phases and ESI‐MS detection. Native amines could be detected and identified by their single ion monitoring chromatograms even when partial coelution was observed. The analysis of the commercial sample returned results coherent with those obtained by GC–FID and with the manufacturer's data.     

Recovering Invisible Signals by Two‐Field NMR Spectroscopy

Nuclear magnetic resonance (NMR) studies have benefited tremendously from the steady increase in the strength of magnetic fields. Spectacular improvements in both sensitivity and resolution have enabled the investigation of molecular systems of rising complexity. At very high fields, this progress may be jeopardized by line broadening, which is due to chemical exchange or relaxation by chemical shift anisotropy. In this work, we introduce a two‐field NMR spectrometer designed for both excitation and observation of nuclear spins in two distinct magnetic fields in a single experiment. NMR spectra of several small molecules as well as a protein were obtained, with two dimensions acquired at vastly different magnetic fields. Resonances of exchanging groups that are broadened beyond recognition at high field can be sharpened to narrow peaks in the low‐field dimension. Two‐field NMR spectroscopy enables the measurement of chemical shifts at optimal fields and the study of molecular systems that suffer from internal dynamics, and opens new avenues for NMR spectroscopy at very high magnetic fields.     

Tetranuclear polybipyridyl complexes of Ru(II) and Mn(II), their electro- and photo-induced transformation into di-mu-oxo Mn(III)Mn(IV) hexanuclear complexes

Three heterotetranuclear complexes, [{Ru(II)(bpy)(2)(L(n))}(3)Mn(II)](8+) (bpy = 2,2'-bipyridine, n = 2, 4, 6), in which a Mn(II)-tris-bipyridine-like centre is covalently linked to three Ru(II)-tris-bipyridine-like moieties using bridging bis-bipyridine L(n) ligands, have been synthesised and characterised. The electrochemical, photophysical and photochemical properties of these complexes have been investigated in CH(3)CN. The cyclic voltammograms of the three complexes exhibit two successive very close one-electron metal-centred oxidation processes in the positive potential region. The first, which is irreversible, corresponds to the Mn(II)/Mn(III) redox system (E(pa) approximately 0.82 V vs Ag/Ag(+) 0.01 M in CH(3)CN-0.1 M Bu(4)NClO(4)), whereas the second which is, reversible, is associated with the Ru(II)/Ru(III) redox couple (E(1/2) approximately 0.91 V). In the negative potential region, three successive reversible four electron systems are observed, corresponding to ligand-based reduction processes. The three stable dimeric oxidized forms of the complexes, [Mn(2)(III,IV)O(2){Ru(II)(bpy)(2)(L(n))}(4)](11+), [Mn(2)(IV,IV)O(2){Ru(II)(bpy)(2)(L(n))}(4)](12+) and [Mn(2)(IV,IV)O(2){Ru(III)(bpy)(2)(L(n))}(4)](16+) are obtained in fairly good yields by sequential electrolyses after consumption of respectively 1.5, 0.5 and 3 electrons per molecule of initial tetranuclear complexes. The formation of the di-micro-oxo binuclear complexes are the result of the instability of the {[Ru(II)(bpy)(2)(L(n))](3)Mn(III)}(9+) species, which react with residual water, via a disproportionation reaction and the release of one ligand, [Ru(II)(bpy)(2)(L(n))](2+). A quantitative yield can be obtained for these reactions if the electrochemical oxidations are performed in the presence of an added external base like 2,6-dimethylpyridine. Photophysical properties of these compounds have been investigated showing that the luminescence of the Ru(II)-tris-bipyridine-like moieties is little affected by the presence of manganese within the tetranuclear complexes. A slight quenching of the excited states of the ruthenium moieties, which occurs by an intramolecular process, has been observed. Measurements made at low concentration (<1 x 10(-5) M) indicate that some decoordination of Mn(2+) arises in 1a-c. These measurements allow the calculation of the association constants for these complexes. Finally, photoinduced oxidation of the tetranuclear complexes has been performed by continuous photolysis experiments in the presence of a large excess of a diazonium salt, acting as a sacrificial oxidant. The three successive oxidation processes, Mn(II)--> Mn(III)Mn(IV), Mn(III)Mn(IV)--> Mn(IV)Mn(IV) and Ru(II)--> Ru(III) are thus obtained, the addition of 2,6-dimethylpyridine in the medium giving an essentially quantitative yield for the two first photo-induced oxidation steps as found for electrochemical oxidation.     

Improvement and simplification of synthesis of 3-aryloxy-1,2-epoxypropanes using solvent-free conditions and microwave irradiations. Relation with medium effects and reaction mechanism

Some 3-aryloxy-1,2-epoxypropanes, interesting as potential synthons in β-adrenergic receptor antagonists preparation, were obtained in excellent yields (65-96% within 2-17 min) by microwave activation (monomode system) using solid-liquid solvent-free phase transfer catalysis (PTC). The best results for the O-alkylation of some phenols with epichlorohydrin were obtained using TBAB and NaOH/K₂CO₃ (1:4 mol/mol) as phase transfer catalyst and more acceptable basic system, respectively. These new procedure is compared with classical methods. Significant specific microwave effect (non-purely thermal) was evidenced in all cases. They were discussed in terms of reaction medium and mechanism, taking into account the variations in polarity of the systems.     

Conformational study of the 1,2,3-propanetriol (glycerol) in the channel of the aquaglyceroporin GlpF

The X-ray structure of the aquaglyceroporin GlpF protein refined by Fu et al. [D. Fu, A. Libson, L.J.W. Miercke, C. Weitzman, P. Nollert, J. Krucinski, R.M. Stroud, Science 290 (2000) 481--486.] shows three glycerol molecules co-crystallized inside the channel. The conformations of these molecules have been used to study the relationship between conformation, energy balance and hydration in the hope that it will provide insight into the molecular transport mechanism in the channel. Initially, the position of the hydrogen atoms of the glycerol molecule in the three conformations was established. As the glycerol molecule progressively loses its hydration waters in its transport pathway inside the channel, the nature of the glycerol bonds changes: the geometry of the alkyl backbone adapts to the available space while the progressive dehydration is partially compensated by the formation of intramolecular hydrogen bonds. The nature of these hydrogen bonds has been established by DFT calculation of the rotation barriers of the hydroxyl groups. Finally, the influence of the intramolecular hydrogen bonds on the conformation of the alkyl backbone has been established by quantum calculations of potential energy surfaces by semi-empirical quantum calculations PM3/Zindo.     

Cellulosic nanoparticles from alfa fibers (<Emphasis Type="Italic">Stipa tenacissima)</Emphasis>: extraction procedures and reinforcement potential in polymer nanocomposites

The microstructure and chemical composition of alfa (Stipa tenacissima) were investigated. The polysaccharide and lignin contents were around 70 and 20 wt%, respectively. From the bleached and delignified fibers, two types of nanosized cellulosic particles were extracted, namely cellulose nanocrystals and microfibrillated cellulose (MFC). The former correspond typically to the elementary crystallite units of the cellulose fibers, with a rod-like morphology and an aspect ratio of about 20. The latter, mechanically disintegrated from oxidized bleached fibres, presents an entangled fibrillar structure with widths in the range 5-20 nm. The reinforcing potential of the ensuing nanoparticles was investigated by casting a mixture of acrylic latex and aqueous dispersion of cellulose nanoparticles. Thermo-mechanical analysis revealed a huge enhancement of the stiffness above the glass transition of the matrix. Significant differences in the mechanical reinforcing capability of the nanoparticles were reported.     

The Chemical Dehydrochlorination of Polyvinyl Chloride. A New Method for Polyenic Sequences Evaluation

Abstract

The chemical dehydrochlorination of polyvinyl chloride was studied in solution in tetrahydrofuran. The dehydrochlorinated products were characterized by their chlorine contents and by UV/visible spectroscopy. The absorption spectra of dehydrochlorinated PVC consist of a series of absorption maxima between 200 and 600 nm due to the formation of conjugated polyenic sequences. In this article we describe a new method for polyenic sequences evaluation based on deconvolution of the experimental spectrum. A comparison with the former technique usually employed is presented.     

The Lyapunov Exponent of Products of Random 2×2 Matrices Close to the Identity

We study products of arbitrary random real 2×2 matrices that are close to the identity matrix. Using the Iwasawa decomposition of SL(2,?), we identify a continuum regime where the mean values and the covariances of the three Iwasawa parameters are simultaneously small. In this regime, the Lyapunov exponent of the product is shown to assume a scaling form. In the general case, the corresponding scaling function is expressed in terms of Gauss’ hypergeometric function. A number of particular cases are also considered, where the scaling function of the Lyapunov exponent involves other special functions (Airy, Bessel, Whittaker, elliptic). The general solution thus obtained allows us, among other things, to recover in a unified framework many results known previously from exactly solvable models of one-dimensional disordered systems.     

Mechanism of Polyvinyl Chloride) Stabilization by Studies with Model Compounds

4-Chloro-2-hexene can be considered a model compound for the chlorinated allylic structure appearing in PVC chains after dehydrochlorination. This model compound was used to elucidate the mechanism of reaction of primary or secondary stabilizers.