MRI investigation of granular interface rheology using a new cylinder shear apparatus

The rheology of granular materials near an interface is investigated through proton magnetic resonance imaging. A new cylinder shear apparatus has been inserted in the magnetic resonance imaging device, which allows the control of the radial confining pressure exerted by the outer wall on the grains and the measurement of the torque on the inner shearing cylinder. A multi-layer velocimetry sequence has been developed for the simultaneous measurement of velocity profiles in different sample zones, while the measurement of the solid fraction profile is based on static imaging of the sample. This study describes the influence of the roughness of the shearing interface and of the transverse confining walls on the granular interface rheology.     

Ground states and flux configurations of the two-dimensional Falicov-Kimball model

The Falicov-Kimball model is a lattice model of itinerant spinless fermions (electrons) interacting by an on-site potential with classical particles (ions). We continue the investigations of the crystalline ground states that appear for various filling of electrons and ions for large coupling. We investigate the model for square as well as triangular lattices. New ground states are found and the effects of a magnetic flux on the structure of the phase diagram are studied. The flux phase problem where one has to find the optimal flux configurations and the nuclei configurations is also solved in some cases. Finally we consider a model where the fermions are replaced by hard-core bosons. This model also has crystalline ground states. Therefore their existence does not require the Pauli principle, but only the on-site hard-core constraint for the itinerant particles.     

Two-dimensional numerical simulation of acoustic wave phase conjugation in magnetostrictive elastic media

The effect of parametric wave phase conjugation (WPC) in application to ultrasound or acoustic waves in magnetostrictive solids has been addressed numerically by Ben Khelil et al. [J. Acoust. Soc. Am. 109, 75-83 (2001)] using 1-D unsteady formulation. Here the numerical method presented by Voinovich et al. [Shock waves 13(3), 221-230 (2003)] extends the analysis to the 2-D effects. The employed model describes universally elastic solids and liquids. A source term similar to Ben Khelil et al.'s accounts for the coupling between deformation and magnetostriction due to external periodic magnetic field. The compatibility between the isotropic constitutive law of the medium and the model of magnetostriction has been considered. Supplementary to the 1-D simulations, the present model involves longitudinal/transversal mode conversion at the sample boundaries and separate magnetic field coupling with dilatation and shear stress. The influence of those factors in a 2-D geometry on the potential output of a magneto-elastic wave phase conjugator is analyzed in this paper. The process under study includes propagation of a wave burst of a given frequency from a point source in a liquid into the active solid, amplification of the waves due to parametric resonance, and formation of time-reversed waves, their radiation into liquid, and focusing. The considered subject is particularly important for ultrasonic applications in acoustic imaging, nondestructive testing, or medical diagnostics and therapy.     

Differential growth and instability in elastic shells

Differential growth in elastic materials can produce stress either through incompatibility of growth or by interaction with the surrounding medium. In many situations, this stress can be sufficient to induce shape instability in the growing medium. To gain better insight in growth-induced instabilities, the growth of an elastic shell loaded with hydrostatic pressure or embedded in an elastic medium is studied. The residual stress arising from the incompatibility of growth and the contact stress arising from the interaction with the surrounding medium are computed with respect to growth and geometric parameters and critical values for instability are obtained. Depending on these parameters, different modes of instability can be obtained.     

The absorption spectrum of methane at 80 and 294 K in the icosad (6717–7589 cm−1): Improved empirical line lists,isotopologue identification and temperature dependence

Using a cryogenic cell and a series of Distributed Feed Back (DFB) diode lasers, new high resolution spectra of methane have been recorded at 80 K and room temperature by differential absorption spectroscopy (DAS) between 6717 and 7589 cm^?1 (1.49–1.32 μm). The investigated spectral region corresponds to the very congested icosad, which is not tractable by theory. Empirical lists of 19,940 and 24,001 lines were constructed from the 80 K and room temperature spectrum, respectively. The room temperature list adds about 8500 features to the empirical list of 15,375 lines at 296 K adopted in the HITRAN database from the original work of L. Brown (Brown, L. Empirical line parameters of methane from 1.1 to 2.1 μm. JQSRT 2005;96:251–70). A number of relatively strong CH₄ lines located near strong water lines were found missing in the HITRAN line list. The improved sensitivity allowed adding more than 7000 lines to our previous list of about 12,000 transitions at 80 K (Campargue A, Wang L, Kassi S, Ma?át M, Votava O. Temperature dependence of the absorption spectrum of CH₄ by high resolution spectroscopy at 81 K: (II) The Icosad region (1.49–1.30 μm). JQSRT 2010;111:1141–51). In order to facilitate identification of the transitions of the different methane isotopologues present in “natural” isotopic abundance, spectra of highly enriched CH₃D and ¹³CH₄ samples were recorded with the same experimental setup, both at room temperature and at 80 K.From the variation of the line strengths between 80 K and 294 K, the low energy values of about 12,000 transitions were determined. They allow accounting for the temperature dependence of 84 and 93% of the methane absorbance in the region, at room temperature and 80 K, respectively. As a result, we provide as supplementary material two complete line lists at 80 K and 294 K, including CH₃D and ¹³CH₄ identification and lower state energy values.     

Weak Coupling and Continuous Limits for Repeated Quantum Interactions

We consider a quantum system in contact with a heat bath consisting in an infinite chain of identical sub-systems at thermal equilibrium at inverse temperature β. The time evolution is discrete and such that over each time step of duration τ, the reference system is coupled to one new element of the chain only, by means of an interaction of strength λ. We consider three asymptotic regimes of the parameters λ and τ for which the effective evolution of observables on the small system becomes continuous over suitable macroscopic time scales T and whose generator can be computed: the weak coupling limit regime λ → 0, τ = 1, the regime τ → 0, λ²τ → 0 and the critical case λ²τ = 1, τ → 0. The first two regimes are perturbative in nature and the effective generators they determine is such that a non-trivial invariant sub-algebra of observables naturally emerges. The third asymptotic regime goes beyond the perturbative regime and provides an effective dynamics governed by a general Lindblad generator naturally constructed from the interaction Hamiltonian. Conversely, this result shows that one can attach to any Lindblad generator a repeated quantum interactions model whose asymptotic effective evolution is generated by this Lindblad operator.     

Luminescence Properties of New Fused Benzothiophene Derivatives and Their Conductive Oligomers Structural and Solvent Effects

The structural and solvent effects on the electronic absorption and fluorescence spectra, and fluorescence quantum yields, of four new fused benzothiophene derivatives, including benzothieno[3,2b]-thiophene (BTT), benzothieno[3,2-b]benzothiophene (BTBT), 6-methoxy[1]benzothieno[3,2b]-thiophene (MeOBTT), and benzothieno[3,2-b]indole (BTI) were investigated at 295 K. The luminescence properties of the corresponding conductive oligomers, poly(BTT) and poly (MeOBTT), electrosynthesized in acetonitrile, were also studied. Satisfactory McRae, Suppan, and Kawski-Chamma-Viallet solvatochromic correlations were established for the four monomers in most solvents. A weak negative solvatochromic behavior was found for these compounds, indicating that their dipole moments are slightly lower in the excited singlet state than in the ground state. Kamlet-Abboud-Taft multiparametric correlations were also obtained for absorption and fluorescence wave numbers and quantum yields, demonstrating the existence of specific solute-solvent interactions. In the case of the oligomers, important red-shifts of the fluorescence emission maxima ( 90–110 nm) relative to the corresponding monomers were observed, which shows the extent of conjugated segments in the oligomer chains.     

Improvement of kinetics,yield, and colloidal stability of biogenic gold nanoparticles using living cells of <Emphasis Type="Italic">Euglena gracilis</Emphasis> microalga

Recent years have witnessed a boom in the biosynthesis of a large variety of nanomaterials using different biological resources among which algae-based entities have been gaining much more attention within the community of material scientists worldwide. In our previously published findings, we explored some factors that governed the biofabrication of gold nanoparticles using living cultures of microalgae, such as the utilized microalgal genera, the phylum they belong to, and the impact of tetrachloroauric acid concentrations on the ability of these strains to perform the biosynthesis of gold nanoparticles once in contact with these cations. As a follow-up, we present in this paper an improvement of the features of bioproduced gold colloids using living cells of Euglena gracilis microalga when this species is grown under either mixotrophic or autotrophic conditions, i.e., exposed to light and grown in an organic carbon-enriched culture medium versus under autotrophic conditions. As an outcome to this alteration, the growth rate of this photosynthetic microorganism is multiplied 7–8 times when grown under mixotrophic conditions compared to autotrophic ones. Therefore, the yield, the kinetics, and the colloidal stability of the biosynthesized gold nanoparticles are dramatically enhanced. Moreover, the shape and the size of the as-produced nano-objects via this biological method are affected. In addition to round-shaped gold nanoparticles, particular shapes, such as triangles and hexagons, appear. These findings add up to the amassed knowledge toward the design of photobioreactors for the scalable and sustainable production of interesting nanomaterials.     

de Haas-van Alphen oscillations in the underdoped high-temperature superconductor YBa2Cu3O6.5

The de Haas-van Alphen effect was observed in the underdoped cuprate YBa2Cu3O6.5 via a torque technique in pulsed magnetic fields up to 59 T. Above a field of approximately 30 T the magnetization exhibits clear quantum oscillations with a single frequency of 540 T and a cyclotron mass of 1.76 times the free electron mass, in excellent agreement with previously observed Shubnikov-de Haas oscillations. The oscillations obey the standard Lifshitz-Kosevich formula of Fermi-liquid theory. This thermodynamic observation of quantum oscillations confirms the existence of a well-defined, closed, and coherent, Fermi surface in the pseudogap phase of cuprates.