New amphiphilic polymers: Poly(N-alkylacrylamide-CO-vinylpyridinium)

A series of new amphiphilic polymers containing various amounts of N-methyl-4-vinylpyridinium units as hydrophilic part and N-dodecylacrylamide or N-decylacrylamide units as hydrophobic part have been prepared by quaternizing the cognate copolymers. Their behaviour in aqueous solutions has been studied by viscometry, as well as by fluorescence spectroscopy and tensiometry. Results are discussed in detail and a conformational model of the macromolecules at the interface (water/methylcyclohexane) is proposed in relation to the formation of microdomains in the aqueous media.     

Multivariate optimization of a solid phase microextraction-headspace procedure for the determination of benzene, toluene, ethylbenzene and xylenes in effluent samples from a waste treatment plant

A method based on solid-phase microextraction (SPME) and gas chromatography with flame ionization detection (GC-FID) has been optimized for the determination of benzene, toluene, ethylbenzene and xylenes (BTEX) in water released from a waste treatment plant. The extraction step was optimized using fractional factorial and central composite designs including the following experimental factors: saline concentration; extraction time; desorption time; agitation velocity; headspace volume. A multiple function was used to describe the experimental conditions for simultaneous extraction of the compounds. The procedure, based on direct SPME at 50 degrees C, using a polydimethylsiloxane fiber, showed good linearity (r>0.997 over a concentration range 2-200 microg L(-1)) and repeatability (relative standard deviation (RSD)<4.23%) for all compounds, with limits of detection ranging from 0.05 to 0.28 microg L(-1), and limits of quantification ranging from 0.14 to 0.84 microg L(-1). Concentrations of the target compounds in these samples were between 145.8 and 1891 microg L(-1).     

Photomagnetic properties of an iron(II) low-spin complex with an unusually long-lived metastable LIESST state

A comprehensive study of the photomagnetic behavior of the [Fe(L222N5)(CN)2].H2O complex has been carried out. This complex is characterized by a low-spin (LS) iron(II)-metal center up to 400 K and exhibits at 10 K the well-known Light-Induced Excited Spin State Trapping (LIESST) effect. The critical LIESST temperature (T(LIESST)) has been measured to be 105 K. The kinetics of the transition from the metastable high-spin (HS) state to the low-spin state have been determined and used for reproducing the experimental T(LIESST) curve. This study represents a second example of a fully low-spin iron(II)-metal complex up to 400 K, which can be photoexcited at low temperature with an atypical long-lived metastable HS state. This underlines the preponderant role of the inner coordination sphere for stabilizing the lifetime of the photoinduced HS state.     

Photochromic and redox properties of bisterpyridine ruthenium complexes based on dimethyldihydropyrene units as bridging ligands

We report herein the synthesis and characterization of four new bisterpyridine dinuclear ruthenium complexes containing the dimethyldihydropyrene (DHP) photochrome as bridging ligand. A synthetic strategy has been developed based on a Suzuki coupling reaction to synthesize these novel terpyridine-DHPs. The reactivity of these different ligands and dinuclear ruthenium complexes with light was examined by (1)H NMR and monitoring the changes in their absorption spectra upon irradiation at controlled wavelengths. The free ligands and their corresponding ruthenium complexes all displayed photochromic properties with highly efficient conversion between the closed stable isomers (DHP) and their open forms (CPD). The properties of the compounds in their closed and open forms were investigated by cyclic voltammetry, spectroscopy, and luminescence measurements.     

Glassy carbon electrode modified with a film of poly(Toluidine Blue O) and carbon nanotubes for nitrite detection

This work describes the modification of a glassy carbon electrode with poly(Toluidine Blue O) (GC/poly-TBO) and single-walled carbon nanotubes (SWCNT) for the electrocatalytic oxidation of nitrite. GC/poly-TBO was prepared by electropolymerization and used as such or after immobilizing SWCNT on the polymeric film to give a composite GC/poly-TBO-SWCNT electrode. The electrochemical and catalytic behavior of both electrodes was studied comparatively. It was observed that the presence of SWCNT contributed to enhance the electrocatalytic response for nitrite oxidation, as measured by amperometry at +0.92 V vs. Ag/AgCl/KCl_sat and pH 7. The response was linear with respect to the nitrite concentration in the 0.001–4 mM range, with a detection limit of 0.37 μM (based on signal to noise ratio of 3) for GC/poly-TBO-SWCNT. The proposed method was also applied to the determination of nitrite in a wastewater sample and compared to the spectrophotometric method.     

Electrochemical response of ascorbic and uric acids at organoclay film modified glassy carbon electrodes and sensing applications

A naturally occurring Cameroonian smectite clay has been grafted with trimethylpropylammonium groups and the resulting organoclay deposited as thin film onto a glassy carbon electrode (GCE) surface. It was then exploited as a suitable matrix for the accumulation and the electrochemical detection of ascorbic acid (AA) and uric acid (UA). Cyclic voltammetry revealed an increase in oxidation peak responses along with a negative shift of the corresponding anodic peak potential for both AA and UA species when using the organoclay coated GCE in comparison with the bare electrode. The electroanalytical response was improved by coating the electrode surface with a first layer of sublimed ferrocene (FC(s)), and then overcoating with the organoclay film to avoid the mediator leaching. The resulting bilayer film exhibited good characteristics such as extended linear range and high sensitivities for AA and UA, in cyclic voltammetry and amperometry. Interestingly, the redox mediator FC(s) was likely to lower overpotentials for AA oxidation (but not for UA), making possible the selective detection of these species in a mixture. The developed method could be used for the determination of AA in a pharmaceutical preparation and for UA in urine.     

MALDI imaging mass spectrometry of lipids by adding lithium salts to the matrix solution

Mass spectrometry imaging of lipids using MALDI–TOF/TOF mass spectrometers is of growing interest for chemical mapping of organic compounds at the surface of tissue sections. Many efforts have been devoted to the best matrix choice and deposition technique. Nevertheless, the identification of lipid species desorbed from tissue sections remains problematic. It is now well-known that protonated, sodium- and potassium-cationized lipids are detected from biological samples, thus complicating the data analysis. A new sample preparation method is proposed, involving the use of lithium salts in the matrix solution in order to simplify the mass spectra with only lithium-cationized molecules instead of a mixture of various cationized species. Five different lithium salts were tested. Among them, lithium trifluoroacetate and lithium iodide merged the different lipid adducts into one single lithium-cationized species. An optimized sample preparation protocol demonstrated that the lithium trifluoroacetate salt slightly increased desorption of phosphatidylcholines. Mass spectrometry images acquired on rat brain tissue sections by adding lithium trifluoroacetate showed the best results in terms of image contrast. Moreover, more structurally relevant fragments were generated by tandem mass spectrometry when analyzing lithium-cationized species.     

Towards new molecular photocatalysts for CO2 reduction: photo-induced electron transfer versus CO dissociation within [Os(NN)(CO)2Cl2] Complexes

Optical excitation in the visible region of trans-(Cl)-[Os(bpy)(CO)(2)Cl(2)] (bpy=2,2'-bipyridine; C1) and trans-(Cl)-[Os(dmbpy)(CO)(2)Cl(2)] (dmbpy=4,4'-dimethyl 2,2'-bipyridine; C2) is known to induce the common CO dissociation reaction. However, the quantum yield of the reactions is less than 0.15, although C1 and C2 display pronounced photoluminescence in the visible region at room temperature with a lifetime of few tens of nanoseconds. Taking into account the characteristics of their emitting state, we have investigated the capability of C1 and C2 to act as a photosensitiser in redox reactions in different solvents (MeCN, PrCN and DMF). The efficient oxidation and reduction of both complexes under continuous irradiation in the presence of a sacrificial electron acceptor or donor is reported here. The photo-induced transformations and the nature of the resulting compounds were analysed by UV/Vis and IR spectroscopies and cyclic voltammetry. Photo-induced oxidation of C1 and C2 leads to the corresponding monocarbonyl oxidised species, whereas photo-induced reduction under argon leads mainly to the formation of the corresponding Os-bonded molecular wires P1 and P2 after exchange of two electrons associated with the loss of two chloro ligands. The chemical yield of the latter reaction (around 65%) becomes quantitative by adding [Ru(bpy)(3)](2+) as an external redox photosensitiser. This behaviour has been used to photocatalyse the two electron, two proton conversion of CO(2) to CO. Turnover numbers (TON) of 11.5 and 19.5 have been obtained respectively for C1 and C2 after 4.5 h of irradiation under CO(2) in DMF with triethanolamine as the electron donor. TON can be slightly increased by adding [Ru(bpy)(3)](2+) to the solution.     

Recherches théoriques sur la structure électronique de molécules contenant des atomes hybridés en sp

Résumé La structure de la molécule d'allène est étudiée à l'aide de la méthode LCAO améliorée. On met en évidence la nécessité d'introduire d'une part l'interaction des systèmes et avec les liaisons C-H et d'autre part un déplacement d'électrons dans les liaisons C-H. La distance interatomique C₁-C₂ est alors bien retrouvée et les charges nettes, presque nulles, sont en accord avec ce que suggère la réactivité chimique de la molécule. La transition permise A ₁ B ₂ est trouvée en bonne place; les trois autres étant un peu basses. Le problème de la réduction des intégrales faisant intervenir la couche 1s est abordé.

---

The improved LCAO theory is used to study the structure of the allene molecule. We show that we must introduce on the one hand the interaction of the and systems with the C-H bonds and on the other hand an electrons displacement in the C-H bonds. The bond distance C₁-C₂ is then found in good agreement with the experimental value and the net charges, almost null, are in agreement with what suggests the chemical reactivity of the molecule. The allowed transition A ₁ B ₂ is found at the right place; the other three being a little low. The problem of the integrals reduction, making to intervene the 1s shell, is approached.

---

Zusammenfassung Die Struktur von Allen wird mit Hilfe der verbesserten LCAO-Methode untersucht. Es wird gezeigt, daß eine Wechselwirkung zwischen - und -System mit den C-H-Bindungen und eine Elektronenverschiebung längs der C-H-Bindungen eingeführt werden müssen. Der C₁-C₂-Bindungsabstand stimmt mit der Erfahrung überein. Die Nettoladungen sind fast Null, wie die chemische Reaktivität zeigt. Der erlaubte Übergang A ₁ B ₂ wird gut plaziert angegeben; aber die drei anderen liegen ein wenig zu tief. Das Problem der Integralreduktion mit 1s-Atomorbitalen wird behandelt.

---

---

Nous tenons à remercier ici M. le Professeur André Julg (Laboratoire de Chimie Théorique, Faculté des Sciences, Marseille) pour les nombreuses discussions que nous avons eues avec lui sur ce sujet, et qui a bien voulu relire le manuscrit.

---

Les calculs numériques ont été effectués par nos soins sur l'ordinateur PB 250 du Centre de Calcul Numérique de la Faculté des Sciences de Marseille.