Fenugreek mucilage as a flocculating agent for sewage treatment

The use of fenugreek mucilage, a natural polysaccharide and a direct food additive, as a flocculating agent for removal of suspended and dissolved solids from sewage effluent has been reported. A flocculation study has been done by the standard jar test method. The percent removal of suspended solid (SS) and dissolved solid (TDS) was determined by varying the polymer dose, pH and contact time. X-ray diffraction patterns of the solid waste material of mucilage and flocs (so obtained after treatment) were used to suggest the incorporation of the crystalline waste material in the mucilage. The optimal mucilage concentration was found to be 0.16 mg/l. The suitable pH range for maximum solid removal (SS and TDS) was alkaline and the time required for treatment was 1-3 h.     

Evaluation of measurement uncertainty for analytical procedures using a linear calibration function

In the EURACHEM/CITAC draft ”Quantifying uncertainty in analytical measurement” estimations of measurement uncertainty in analytical results for linear calibration are given. In this work these estimations are compared, i.e. the uncertainty deduced from repeated observations of the sample vs. the uncertainty deduced from the standard residual deviation of the regression. As a result of this study it is shown that an uncertainty estimation based on repeated observations can give more realistic values if the condition of variance homogeneity is not correctly fulfilled in the calibration range. The complete calculation of measurement uncertainty including assessment of trueness is represented by an example concerning the determination of zinc in sediment samples using ICP-atomic emission spectrometry. Received: 9 February 2002 Accepted: 17 April 2002     

An expeditious,solvent-free synthesis of some 5-aryl-2-(2-hydroxyphenyl)-1,3,4-oxadiazoles

An efficient, rapid, microwave-accelerated one-step synthesis of some 5-aryl-2-(2-hydroxy-phenyl)-1,3,4-oxadiazoles by reaction of salicylic hydrazide with carboxylic acids in the presence of thionyl chloride under neat conditions is described. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1264–1267, August, 2007.     

Relativistic calculations on the ground and excited states of AgH and AuH in cylindrical harmonic confinement

The relativistic ground and low-lying excited state potential energy curves of AgH and AuH in the presence of a cylindrical harmonic confining potential were calculated using the multi-state multi-reference perturbation theory with the spin-free no-pair Hamiltonian obtained via the third-order Douglas–Kroll transformation, incorporated with the full two-electron Breit–Pauli spin–orbit operator. The spectroscopic parameters were obtained for both the scalar- and quasi-relativistic potentials. The spin–orbit coupling constants were calculated for several strengths of the confining potential, and the effects of the applied potential on the coupling constants were analyzed using configuration interaction. This paper is dedicated to Serafín Fraga—colleague, mentor, and friend.     

Drag on two nonuniformly structured flocs moving along the axis of a cylindrical tube

The boundary effect on the drag on two identical, nonuniformly structured flocs moving along the axis of a cylindrical tube filled with a Newtonian fluid is investigated at a small to medium larger Reynolds number. A two-layer model is adopted to simulate various possible structures of a floc, and the flow field inside is described by Darcy–Brinkman model. The results of numerical simulation reveal that a convective flow is present in the rear region of a floc when Reynolds number is on the order of 40. The presence of the tube wall and/or the porous structure of a floc has the effect of reducing that convective flow. For a fixed level of the volume-average permeability of a floc, the influence of the tube wall on the drag depends upon floc structure; the influence on a nonuniformly structured floc is more significant than that on a uniformly structured floc. The more nonuniform the floc structure, the more appreciable the deviation of the drag coefficient–Reynolds number curve from a Stokes’-law-like relation becomes. The smaller the volume-average permeability of a floc and/or the smaller the separation distance between the two flocs, the greater is the deviation, but the presence of the tube wall has the effect of reducing that deviation.     

Electrochemical and kinetic study of oxygen in a perfluorotributylamine emulsion

Oxygen can be determined in a perfluorotributylamine emulsion used as a blood substitute by coulometry and polarography. The oxygen uptake of the emulsion (4.3 × 10^?3 mol l^?1 or 11 ml-% at 25°C and P_O2 = 760 mm Hg) is about three times greater than that of water. The adsorption of surfactant on a dropping mercury electrode changes the electrochemical parameters E_{$\text{1}\text{2}$}, α and k₃. The marked difference between the diffusion coefficients of oxygen and hydrogen peroxide (ratio 2.6) seems to be proceed from the ejection of oxygen molecules from the perfluorotributylamine droplets and from the insolubility of hydrogen peroxide molecules in the droplets. The constant rate of oxygen release by these droplets was estimated to be 10⁴ s^?1 by a stopped-flow spectrophotometric method. This constant rate seems to be linked with the particle diameter (0.2 μm) and the diffusion coefficient in the perfluorotributylamine droplets (1.6 × 10^?6 cm² s^?1).     

Electrochemical monitoring of indigo preparation using Maya’s ancient procedures

The preparation of indigo from Indigofera suffruticosa following the procedures attributed to ancient Mayas was electrochemically monitored using the voltammetry-of-microparticles approach. The mechanism formation of indigotin and indirubin from its precursors, indican and isatan, is discussed. Comparison of voltammetric profiles for differently prepared and commercial indigos and genuine Maya Blue samples suggests that the preparation procedure of indigo changed during the Late Classical Maya period. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Volumetric properties of the boldine + alcohol mixtures at atmospheric pressure from 283.15 to 333.15 K: A new method for the determination of the density of pure boldine

Densities of boldine + alcohol binary mixtures were measured over the whole accessible range of boldine compositions at temperatures from 283.15 to 333.15 K using an Anton-Paar digital vibrating glass tube densimeter. The binary systems studied include, as a solvent, seven normal alcohols from n-C₁ to n-C₆, n-C₈, and isopropanol. The density of these systems has been found an increasing function of the boldine composition. A new methodology based on density data of solutions of solid solutes with normal alcohols is described in order to determine solid molar volume of pure solutes. This methodology was validated with pure solid naphthalene molar volumes data at 298.15 K, with an average uncertainty of 6%.     

Synthesis of pyrazine alcaloids from Botryllus leachi. Diazines 43

[reaction: see text] Regioselective metalation of pyrazines and cross-coupling reactions provides an easy access to botryllazines A and B and to an isomer of botryllazine A with good yields from chloropyrazine.     

Elemental analysis of Korean women’s blood serums using instrumental neutron activation analysis

Instrumental neutron activation analysis was used to assess the concentration of the inorganic trace elements in Korean women’s blood serums. It was found that a high concentration of Na and Cl incurs an analytical interference, but the 12 elements such as Br, Ca, Cl, Co, Cr, Cs, Fe, K, Na, Rb, Se and Zn could be determined under the condition of an interference minimization. Serum samples collected from 63 women were analyzed and the concentration level and range of the elements were evaluated. NIST SRMs were analyzed simultaneously for quality control. The average values of the Na and Cl determined in the serum samples were 3,365 and 3,533 mg/l, Ca was 96.4 mg/l and K was 191 mg/l. Besides, Br, Se and Zn have a concentration level of 6.46, 0.13 and 0.98 mg/l, respectively. It was found that there is no significant difference between the present values and the reported values.