12C6+离子辐照对阿维链霉菌代谢效应研究

对12C6+ 离子辐照诱变高产阿维链霉菌株ZJAV-Y1-203 和原始菌株ZJAV-A-1 的摇瓶发酵pH 值、菌体浓度、碳源和氮源代谢进行了测定,研究了12C6+ 辐照对阿维链霉菌的代谢效应。在发酵前期(48h),原始菌株发酵液pH 值低于突变菌株;在发酵96~196 h,诱变高产菌株ZJAV-Y1-203 繁殖快,生长旺盛,N的利用率高;菌体浓度大于原始菌株的浓度,且发酵液的pH 稳定,菌体处于代谢相对更稳定期;在发酵144~240 h,诱变高产菌株ZJAV-Y1-203 对糖源消耗低于原始菌株ZJAV-A-1。这些结果表明,12C6+ 离子辐照对阿维链霉菌代谢影响有利于阿维菌素合成。pH value, mycelium concentration, carbon source and nitrogen metabolism in flask fermentation of the mutant high-producing strain ZJAV-Y1-203 and the original strain ZJAV-A1 have been investigated, in order to show the metabolic effect of avermitilis irradiated by ion beam of 12C6. In early stage (48 h) of the fermentation, pH value of the original fermentation was lower than that of the mutant strains. In 96~196 h of fermentation, the nitrogen utilization in the strains ZJAV-Y1-203 was higher than that in the original strains, its reproductive was fast, and its growing was vigorous. The mycelium concentration of ZJAV-Y1-203 was greater than the original strain, and the pH value of fermentation were stable, so its metabolism was relatively more stable. In 144240 h of fermentation, the strain ZJAV-Y1-203 on sugar consumption was less than the original strains. The effect of 12C6 ion irradiation on metabolism of Streptomyces avermitilis is conducive to the synthesis of avermectin.     

基于ZEMAX高功率半导体激光器光纤耦合设计

随着半导体激光器光源在激光加工领域的应用不断拓展,研制高耦合效率的半导体激光器光纤耦合模块变得十分重要。为了进一步提高光纤耦合激光二极管模块的输出功率,本文应用ZEMAX光学设计软件进行仿真模拟,将12只波长为808 nm、输出功率为10 W的单管半导体激光器通过合束方法高效率耦合进光纤。耦合光纤芯径为150μm、数值孔径为0.22,光纤输出功率为116.2 W,耦合效率为96.8%。     

氩、氢混合等离子体处理对GaAs表面性质及发光特性的影响

介绍了一种氩、氢混合等离子体清洗GaAs基片的实验工艺,深入研究了氩、氢等离子体清洗GaAs表面污染物和氧化层,并活化表面性能的基本原理,同时讨论了气体流量、溅射功率和清洗时间等不同溅射参数对等离子体清洗效果的影响。结果表明,在氩气和氢气流量分别为10 cm³/min和30 cm³/min,溅射功率为20 W,清洗时间为15 min的条件下,GaAs样品的光致发光强度提高达139.12%,样品表面的As-O键和Ga-O键基本消失。     

润湿特性对超级电容器储能动力学的影响机理

润湿特性对超级电容器储能性能有着至关重要的影响。借助分子动力学模拟,本文研究了润湿特性对超级电容器储能动力学行为的影响。以石墨烯和晶体铜作为疏电解液和亲电解液电极材料。结果表明,在充电过程中,亲电解液铜电极呈现出非对称的U型微分电容曲线,负极电容是正极的～5.77倍,不同于经典双电层理论Gouy-Chapman-Stern(对称U型)和疏电解液型。该现象与离子自由能阻力分布密切相关,负极自由能阻力远小于正极(～2倍)和疏电解液电极,进而有利于强化双电层结构对电极电压的响应能力,导致更高微分电容。通过微分离子电荷密度,本文再现了微分电容演变规律,并发现改善润湿性会显著降低双电层厚度。最后,我们指出润湿性直接影响储能微观机理,将电荷储存机制从离子吸附和交换共同主导(疏电解液)转变到离子吸附主导(亲电解液)。本文所得结论揭示了润湿特性对储能动力学行为影响的原子层级机理,对超级电容器材料设计、构筑与润湿特性调控具有重要指导意义。     

圣诞树底座灯系统的光学参数对照测量与数据分析

某公司生产的圣诞树由于质量问题在销往国外时被烧毁。采用故障样品和参照样品比较测量法,在同等条件下,分别测量两个样品的光谱辐射照度分布,波段积分辐射照度,色温,以及温度特性等参数。实验结果表明:故障样品与参照样品的色温分别为2722K和3060K。在紫外波段、可见波段和近红外波段,故障样品的积分辐射照度分别是正常样品的1.7倍、2.4倍和10.7倍。故障样品的灯系统未进行任何技术处理,而参照样品的灯系统进行了可见与近红外吸收处理,因此总辐射照度显著减弱。温度特性实验结果表明:在同样的受辐照时间7min内,故障样品的温升高达101.5℃,而参照样品的温升只有46.4℃。这些参数的差异可能是导致圣诞树烧毁的主要原因。     

有机太阳能电池简介与展望

太阳能是一种非常重要的可再生能源。将太阳能转化为电能的有机太阳能电池,因其具有重量轻,柔韧性好,可以进行大面积、低成本的柔性制备等优点,为解决未来全球的能源问题提供了一种选择。简要介绍了有机太阳能电池的发展、性能参数、工作机理和应用实例。     

Preparation of Immobilized Metal Affinity Chromatographic Packings Based on Monodisperse Hydrophilic Non‐porous Beads and Their Application

Three hydrophilic immobilized metal affinity chromatographic packings for HPLC have been synthesized by chemical modification of 3.0 µm monodisperse non‐porous poly(glycidyl methacrylate‐co‐ethylenedimethacrylate) (P_GMA/EDMA) beads. The retention behavior of proteins on the metal ion chelated columns loaded with copper(II), nickel(II) and zin(II) ion was studied. The effect of pH on the protein retention was investigated on both the naked and metal ion chelated columns in the range from 4.0 to 9.0. Four proteins were quickly separated in 3.0 min with linear gradient elution at a flow rate of 3.0 mL/min by using the synthesized Ni²⁺‐IDA (iminodiacetic acid) packings. The separation time was shorter than other immobilized metal affinity chromatography reported in the literature. Purification of lysozyme from egg white and trypsin on the commercially available trypsin was performed on the naked‐IDA and Cu²⁺‐IDA columns, respectively. The purities of the purified trypsin and lysozyme were more than 92% and 95%, respectively.     

Group-wise sufficient dimension reduction with principal fitted components

Sufficient dimension reduction methodologies in regressions of Y on a p-variate X aim at obtaining a reduction \(R(X) \in {\mathbb R}^{d}, d \le p\), that retains all the regression information of Y in X. When the predictors fall naturally into a number of known groups or domains, it has been established that exploiting the grouping information often leads to more effective sufficient dimension reduction of the predictors. In this article, we consider group-wise sufficient dimension reduction based on principal fitted components, when the grouping information is unknown. Principal fitted components methodology is coupled with an agglomerative clustering procedure to identify a suitable grouping structure. Simulations and real data analysis demonstrate that the group-wise principal fitted components sufficient dimension reduction is superior to the standard principal fitted components and to general sufficient dimension reduction methods.     

射频等离子硫钝化GaAs(100)的表面特性

采用射频等离子方法,对Ga As(100)衬底片表面进行干法硫等离子体钝化,旨在得到性能稳定含硫钝化层。样品经过360℃温度条件下的快速热退火,光致发光(PL)测试表明,钝化后的样品PL强度上升了71%。同时,钝化样品的稳定性测试结果表明,样品放置在实验室空气中30 d,其PL强度未出现明显变化,说明Ga As的等离子体干法硫钝化具有较好的性能稳定性。     

掺Y对PbWO4闪烁体的热释光影响

研究了纯PbWO₄和PbWO₄:Y晶体经γ射线辐照和可见光光照前后室温 以上的热释光.发现大剂量辐照后掺Y可以有效地抑制热释光的强度并使热释光峰移向高温, 说明掺Y有利于提高光输出的稳定性.可见光光照也会影响热释光并可以产生新的热释光峰, 这可能是由于光释电子(或空穴)被浅陷阱重新俘获或是光照后产生了新型色心的结果. 关键词： 4')" href="#">PbWO₄ 掺Y 热释光