First investigation of non-classical dihydrogen bonding between an early transition-metal hydride and alcohols: IR, NMR, and DFT approach

The interaction of [NbCp(2)H(3)] with fluorinated alcohols to give dihydrogen-bonded complexes was studied by a combination of IR, NMR and DFT methods. IR spectra were examined in the range from 200-295 K, affording a clear picture of dihydrogen-bond formation when [NbCp(2)H(3)]/HOR(f) mixtures (HOR(f) = hexafluoroisopropanol (HFIP) or perfluoro-tert-butanol (PFTB)) were quickly cooled to 200 K. Through examination of the OH region, the dihydrogen-bond energetics were determined to be 4.5+/-0.3 kcal mol(-1) for TFE (TFE = trifluoroethanol) and 5.7+/-0.3 kcal mol(-1) for HFIP. (1)H NMR studies of solutions of [NbCp(2)H(2)(B)H(A)] and HFIP in [D(8)]toluene revealed high-field shifts of the hydrides H(A) and H(B), characteristic of dihydrogen-bond formation, upon addition of alcohol. The magnitude of signal shifts and T(1) relaxation time measurements show preferential coordination of the alcohol to the central hydride H(A), but are also consistent with a bifurcated character of the dihydrogen bonding. Estimations of hydride-proton distances based on T(1) data are in good accord with the results of DFT calculations. DFT calculations for the interaction of [NbCp(2)H(3)] with a series of non-fluorinated (MeOH, CH(3)COOH) and fluorinated (CF(3)OH, TFE, HFIP, PFTB and CF(3)COOH) proton donors of different strengths showed dihydrogen-bond formation, with binding energies ranging from -5.7 to -12.3 kcal mol(-1), depending on the proton donor strength. Coordination of proton donors occurs both to the central and to the lateral hydrides of [NbCp(2)H(3)], the former interaction being of bifurcated type and energetically slightly more favourable. In the case of the strong acid H(3)O(+), the proton transfer occurs without any barrier, and no dihydrogen-bonded intermediates are found. Proton transfer to [NbCp(2)H(3)] gives bis(dihydrogen) [NbCp(2)(eta(2)-H(2))(2)](+) and dihydride(dihydrogen) complexes [NbCp(2)(H)(2)(eta(2)-H(2))](+) (with lateral hydrides and central dihydrogen), the former product being slightly more stable. When two molecules of TFA were included in the calculations, in addition to the dihydrogen-bonded adduct, an ionic pair formed by the cationic bis(dihydrogen) complex [NbCp(2)(eta(2)-H(2))(2)](+) and the homoconjugated anion pair (CF(3)COO...H...OOCCF(3))(-) was found as a minimum. It is very likely that these ionic pairs may be intermediates in the H/D exchange between the hydride ligands and the OD group observed with the more acidic alcohols in the NMR studies.     

Generation of diversiform gold nanostructures inspired by honey's components: Growth mechanism, characterization, and shape separation by the centrifugation-assisted sedimentation

The green synthesis of irregular-shaped nanomaterials used for various applications in nanoplasmonics, medicine, and biotechnology creates an economical and environmental challenge. We describe the rapid wet-chemical approach to synthesis of stable and water-soluble gold nanostructues at room temperature. In addition to spherical and road-like nanoparticles, gold decahedra and triangular plates were grown using the one-step synthesis process of HAuCl(4) in the presence of honey, in which main components act as reducing (glucose) and stabilizing (fructose) agents; the mechanism of the process is discussed in details. The requirements for anisotropic phase boundaries for generation of polyhedral gold nanocrystals in solutions are highlighted. The synthesis, morphology, and separation procedure of gold nanoparticles are examined using the techniques of optical spectroscopy, transmission electron microscopy, and atomic force microscopy. We demonstrate that centrifugation can be used for efficient separation of nanoparticles with different shapes from a mixture. It was found that while centrifuging, the spheres sediment at the bottom of the tube, segregating from rods that form a deposit on the side wall, whereas polygons remain in the solution.     

Essential oil composition of the aerial parts of fresh and air-dried Salvia palaestina Benth. (Lamiaceae) growing wild in Jordan

The composition of the essential oil of fresh and air-dried Salvia palaestina Benth. (Lamiaceae) growing wild in Jordan has been studied using gas chromatography-mass spectrometry analysis. The essential oils of fresh and air-dried S. palaestina were mainly composed of sesquiterpene hydrocarbons (52.66% and 65.98%, respectively). The major component detected in the oils of fresh and dry S. palaestina was germacrene D (21.18% and 26.02%, respectively). Air drying resulted in a general increase of sesquiterpene hydrocarbons and a great decrease in the percentage of monoterpene hydrocarbons.     

Rational design of core–shell molecularly imprinted polymer based on computational simulation and Doehlert experimental optimization: application to the separation of tanshinone IIA from Salvia miltiorrhiza Bunge

Computational simulation and Doehlert experimental optimization were done for the rational design of a core-shell molecularly imprinted polymer (CS-MIP) for use in the highly selective separation of Tanshinone IIA (TSIIA) from the crude extracts of Salvia miltiorrhiza Bunge (SMB). The functional monomer layer of the polymer shells directed the selective occurrence of imprinting polymerization at the surface of silica through the copolymerization of vinyl end groups with functional monomers and also drove TSIIA templates into the formed polymer shells through the charge-transfer complex interactions between TSIIA and the functional monomer layer. As a result, the maximum rebinding capacity was achieved with the use of optimal grafting ratio by the Doehlert design. The CS-MIP exhibited high recognition selectivity and binding affinity to TSIIA. When the imprinted particles were used as dispersive solid phase extraction sorbents, the recovery yield of TSIIA reached 93% by a one-step extraction from the crude extracts of SMB, and the purity of TSIIA was larger than 98% by HPLC analysis. These results show the possibility of a highly selective separation and enrichment of TSIIA from the SMB using the TSIIA-imprinted core-shell molecularly imprinted polymers.     

Proteoliposome-based capillary electrophoresis for screening membrane protein inhibitors

A method for screening of monoamine oxidase (MAO) inhibitor was carried out using capillary electrophoresis (CE) based on the interaction of MAO and its substrate kynuramine (Kyn). Bioactive proteoliposome was reconstituted by liposome and MAO and then was applied as the pseudostationary phase (PSP) of CE to mimic the interaction between the enzyme and its substrate. N-prolmrgyl-R-2-heptylamine (R-2-HPA) and rasagiline [N-propargyl-1-(R)-aminoindan], which are two kinds of MAO inhibitors, were added into the running buffers containing proteoliposome. The results showed that the relative migration time ratio (RMTR × 10(-1)) values of Kyn were enhanced from 8.88 to 9.31 with an increase of the concentrations of rasagiline from 10(-6) to 1 mM. However, the RMTR values of Kyn were enhanced from 8.83 to 9.14 with an increase of the concentrations of R-2-HPA from 10(-6) to 1 mM. The RMTR value of Kyn in the presence of rasagiline was larger than that in the presence of R-2-HPA when rasagiline and R-2-HPA were at the same concentration. The results indicated that the interaction between Kyn and MAO was weakened with the increase of the inhibitors. In addition, the results of offline incubation showed that the inhibitions of rasagiline were 100.0, 72.1, 51.8 and 5.4% at the concentration of 1, 10(-2), 10(-4) and 10(-6) mM; moreover, the inhibitions of R-2-HPA were 70.0, 44.9, 4.1 and 0.9% at the concentrations of 1, 10(-2), 10(-4) and 10(-6) mM. The inhibition efficiency of rasagiline was stronger than that of R-2-HPA at the same concentration. Additionally, the interaction between Kyn and liposome was also investigated. This newly developed method might provide a potential tool for screening MAO inhibitor.     

Glycopolymers Made from Polyrotaxanes Terminated with Bile Acids: Preparation,Self‐Assembly,and Targeting Delivery

The use of natural compounds to construct biomaterials, including delivery system, is an attractive strategy. In the present study, through threading functional α‐cyclodextrins onto the conjugated macromolecules of poly(ethylene glycol) (PEG) and natural compound bile acid, glycopolymers of polyrotaxanes with the active targeting ability are obtained. These glycopolymers self‐assemble into micelles as evidenced by dynamic light scattering and transmission electron microscopy, in which glucosamine, as an example of targeting groups, is introduced. These micelles after loading doxorubicin (DOX) exhibit the selective recognition with cancer cells 4T1. Meanwhile, the maximal half inhibitory concentration is determined to be ≈2.5 mg L^?1 for the DOX‐loaded micelles, close to the value of free DOX·HCl (1.9 mg L^?1). The cumulative release of DOX at pH 5.5 is faster than at pH 7.4, which may be used as the controlled release system. This drug delivery system assembled by glycopolymers features high drug loading of DOX, superior biocompatibility. The strategy not only utilizes the micellization induced by bile acids, but also overcomes the major limitation of PEG such as the lack of targeting groups. In particular, this drug delivery platform can extend to grafting the other targeting groups, rendering this system more versatile.     

γ-Fe2O3/Ag/TiO2的制备与抗菌性能

采用两步法合成了γ-Fe₂O₃/Ag/TiO₂复合光催化剂, 以大肠埃希氏菌(E. coli)为目标菌, 对数去除率为评价指标评价了催化剂的抗菌性能, 优化了催化剂的最佳制备参数. 通过X射线衍射、 扫描电子显微镜、 X射线光电子能谱和紫外-可见漫反射光谱等手段对催化剂进行了表征. 结果表明, 当Ti/Ag摩尔比为1:0.05, 煅烧时间为3 h, 煅烧温度为350 ℃时, γ-Fe₂O₃/Ag/TiO₂表现出最佳抗菌活性. 复合催化剂具有介孔结构, 比表面积为89.1 m²/g; 光吸收边界达690 nm, 有良好的可见光响应能力; 磁性较强, 在水处理应用中可有效分离和重复使用. 反应条件不受光源限制, 在有/无光照下均具有良好的抗菌活性, 且太阳光辐照下对E. coli的对数去除率可达6.28.     

STUDIES ON TUNG OIL COATED REGENERATED CELLULOSE FILMS WITH WATERRESISTANCE

Regenerated cellulose films with water-resistance were obtained by an improved method ofpreparing cellulose cuoxam solution from pulps of agricultural wastes (linters, wheat straw, reedand Bamao). Experimental results showed that the mechanical properties of both the dry. and wetfilms were excellent. Data from IR, SEM and tensile strength measurements implied that thesignificant improvement of water-resistance of the films was due to the cohesion between the thinTung oil covers with hydrophobicity and the regenerated cellulose films. The films werecompletely biodegraded after being buried in soil for 100 days. The transmittance of the filmsderived from linter and reed in visible band range were 80-90%.     

Surface and Catalytic Properties of K/V Catalysts Coating on Porous Al2O3 Substrate

The morphology of different ratio K/V catalysts supported on porous α‐alumina substrate was investigated by atomic force microscopy (AFM). Changes in the particle size distribution, pore size distribution were analyzed respectively using AFM software. In addition, their catalytic activities and compositions for carbon oxidation were studied by x‐ray diffraction (XRD), differential scanning calorimetry (DSC), and temperature‐programmed reactions (TPR). As a result, with the increase of K concentration, the mean particle size gradually increased and the mean pore size decreased. According to the catalytic activity studies, the catalytic activity of the KVO₃ and K₃V₅O₁₄ phases are more effective than KCl.     

Capillary Coated with Layer-by-Layer Assembly of γ-Zirconium Phosphate/ Lysozyme Nanocomposite Film for Open Tubular Capillary Electrochromatography Chiral Separation

A new capillary coating of alternate -zirconium phosphate lysozyme fabricated for open-tubular electrochromatography enantioseparation. The chiral compounds D, L-tryptophan tested were enantiomerically resolved. The influences brought by experimental parameters, such as organic modifier, temperature, applied voltage and pH of running buffer on the performance of the column, were investigated.