From clusters to ionic complexes: structurally characterized thallium titanium double alkoxides

A series of sterically varied titanium alkoxides [[Ti(OR)(4)](n)(), n = 4, OR = OCH(2)CH(3) (OEt); n = 1, OCH(CH(3))(2) (OPr(i)); n = 2, OCH(2)C(CH(3))(3) (ONep); n = 1, OC(6)H(3)(CH(3))(2)-2,6 (DMP)] were reacted with a series of thallium alkoxides [[Tl(OR)](x) (x = 4, OR = OEt, ONep; n = infinity, DMP)]. The resultant products of the [Tl(mu(3)-OEt)](4)-modified [Ti(OR)(4)](n)() (OR = OEt, OPr(i), ONep) were found by X-ray analysis to be Tl(4)Ti(2)(mu-O)(mu(3)-OEt)(8)(OEt)(2) (1), Tl(4)Ti(2)(mu-O)(mu(3)-OPr(i))(5)(mu(3)-OEt)(3)(OEt)(2) (2), and TlTi(2)(mu(3)-OEt)(2)(mu-OEt)(mu-ONep)(2)(ONep)(4) (3), respectively. The reaction of [Tl(mu(3)-OEt)](4), 12HOEt, and 4[Ti(mu-ONep)ONep)(3)](2) to generate 3 in a higher yield resulted in the isolation of TlTi(2)(mu(3)-OEt)(mu(3)-ONep)(mu-OEt)(mu-ONep)(2)(ONep)(4) (4). Compounds 1 and 2 possess an octahedral (Oh) arrangement of two Ti and four Tl metal atoms around a mu-O central oxide atom (the Tl-O distance is too long to be considered a bond). For both compounds, each Ti atom adopts a distorted Oh geometry with one terminal OEt ligand. The Tl atoms are formally 4-coordinated, adopting a distorted pyramidal geometry using four mu(3)-OR (OR = OEt or OPr(i)) ligands to complete their coordination sphere. The Tl atoms reside approximately 1.4 A below the basal plane of oxygens. In contrast to these structures, both 3 and 4 utilize ONep ligands and display reduced oligomerization yielding trinuclear complexes without oxo formation. The two Ti cations are Oh, and the single Tl cation is in a formal distorted pyramidal (PYD) arrangement. If the lone pair of the Tl cations are considered in the geometry, each Tl adopts a square base pyramidal geometry. Two terminal ONep ligands are bound to each Ti with the remainder of the molecule consisting of mu(3)- and mu-ONep ligands. The reaction of [Tl(mu(3)-ONep)](4) with two equivalents of [Ti(mu-ONep)(ONep)(3)](2) also led to the isolation of the homoleptic trinuclear complex TlTi(2)(mu(3)-ONep)(2)(mu-ONep)(3)(ONep)(4) (5) which is analogous in structure to the mixed ligand species of 3 and 4. Each Ti is Oh coordinated with six ONep ligands, and the single Tl is PYD bound by ONep ligands. A further increase in the steric bulk of the pendant ligands, using [Tl(mu-DMP)](infinity) and [Ti(mu-ONep)(ONep)(3)](2), resulted in a further decrease in the nuclearity yielding the dinuclear species TlTi(mu-DMP)(mu-ONep)(DMP)(ONep)(2) (6). For 6, the two metals are bound by a mu-ONep and a mu-DMP ligand. The Tl metal center was solved in a bent geometry while the Ti adopted a distorted trigonal bipyramidal (TBP) geometry using three ONep and two DMP ligands to fill its coordination sphere. Further increasing the steric bulk of the ancillary ligands using Ti(DMP)(4) and [Tl(mu-DMP)](infinity) led to the formation of [Tl(+)][(-)(eta(2-3)-DMP)Ti(DMP)(4)] (7). The Ti metal center is in a TBP geometry, and the "naked" Tl cation resides unencumbered by solvent molecules but was found to have a strong pi-interaction with four DMP ligands of neighboring Ti(DMP)(5)(-) anions. For this novel set of compounds, (205)Tl NMR spectroscopy was used to investigate the solution behavior of these compounds. Multiple (205)Tl resonances were observed for the solution spectra of the crystalline material of 1-6, and a broad singlet was observed for 7. The large number of minor resonances noted for these compounds was attributed to sensitivity of the Tl cation based on small variations due to ligand rearrangement. However, the major resonance noted in the (205)Tl NMR solution spectra of 1-7 are in agreement with their respective solid-state structures.     

Synthesis and Characterization of Organosilicon Substituted Fluorenyl Derivatives

Friedel‐Crafts cycloalkylation of biphenyl with 2,3‐dichlorobutyltrichlorosilane(Cl₃Si‐CH₂CHClCHClCH₃) at a temperature of 100°C in the presence of anhydrous aluminum chloride catalyst gave cyclized product, 9‐methyl‐9‐(2‐trichlorosilylethyl)fluorene 1a , in 33% yield. Methylation of 1a with nucleophilic reagent such as methyl magnesium chloride, gave 9‐methyl‐9‐(2‐trimethylsilylethyl)fluorene 2 while bromination of 2 with excess amount of bromine in DMF resulted in 2,7‐dibromo‐9‐methyl‐9‐(2‐trichlorosilyl)fluorene 3 in good yield. All the compounds were structurally identified by GC/MS, ¹H and ¹³C‐NMR spectroscopy.     

Synthesis and characterization of radiation grafted films for removal of arsenic and some heavy metals from contaminated water

Grafting of styrene/maleic anhydride and methyl methacrylate/maleic anhydride binary monomers onto the low density polyethylene film was performed using the γ-ray irradiation technique. Then, the synthesized grafted films were treated with different ammonia derivatives for developing chelating functionalization. These chelating products were characterized by the gravimetric method as well as by the Fourier transformed infrared spectroscopic method, and were used for removal of arsenic and some heavy metals from aqueous solutions. The optimum absorbed dose of 30 kGy reveals the graft yielding of about 325% in the films. Uptake of arsenic and some heavy-metal ions (Cr(III), Mn(II), Fe(III), Ni(II), Cu(II) and Pb(II)) from contaminated water by the chelating functionalized films (CFF) was examined by an atomic absorption spectrophotometer. The maximum arsenic removal capacity of 5062 mg/kg has been observed for the film treated with hydroxylamine hydrochloride. The CFF prepared by semicarbazide and thiol analogs show affinity toward the metal ions with an order: Cu(II)>Fe(III)>Mn(II) etc. The results obtained from this study indicate that the functionalized films show good chelating and ion-exchange property for metal ions.     

Band‐Gap Manipulations of Monolayer Graphene by Phenyl Radical Adsorptions: A Density Functional Theory Study

Phenyl radical (Ph^.) adsorption on monolayer graphene sheets is used to investigate the band‐gap manipulation of graphene through density functional theory. Adsorption of a single Ph^. on graphene breaks the aromatic π‐bond and generates an unpaired electron, which is delocalized to the ortho or para position. Adsorption of a second radical at the ortho or para position saturates the radical by electron pairing and results in semiconducting graphene. Adsorption of a second radical at the ortho position (ortho–ortho pairing) is found to be more favorable than adsorption at the para position (ortho–para pairing), and the ortho–ortho pairing has stronger effects on band‐gap opening compared with ortho–para pairing. Adsorption of even numbers of Ph^. on graphene by ortho–ortho and ortho–para pairings, in general, increases the band gap. Our study shows promise of band‐gap manipulation in monolayer graphene by Ph^. adsorption, leading to potential wider applications of graphene.     

Role of Divalent Metals in Polymer Degradation

The role of divalent metals in the degradation of the physico-mechanical properties of radiation-vulcanized natural rubber latex (RVNRL) films was investigated. RVNRL films were prepared by the addition of metals (Cu, Mg, etc.) of different concentrations (0–30ppm) to natural rubber latex and irradiated with various radiation doses (0–20kGy). The radiation doses were optimized (12kGy), and the adverse effect of metal ions was studied against a reference film prepared with no metal ions. Tensile strength, tear strength, and cross-linking density of the irradiated rubber films decreased with increasing metal ion concentrations and decreasing radiation doses. The mechanical properties of the films were reduced by 10–15% for 30ppm metal ions and at the optimum dose. In contrast, elongation at break, permanent set, and swelling ratio of the films increased at the same conditions. The relative effect of metal ions can be explained by the classical electron concept, reported in this article.     

Effect of Manganese on Radiation Vulcanization of Natural Rubber

Manganese was added as a promoter to investigate physico-mechanical properties of radiation-vulcanized natural rubber latex (RVNRL) films. RVNRL films were prepared by the addition of Mn with the concentration range 0–30 ppm to natural rubber latex and irradiated with various radiation doses (0–20 kGy). Tensile strength, tear strength, and cross-linking density of the irradiated rubber films increased with increasing the concentration of Mn ions as well as radiation doses. In contrast, elongation at break, permanent set, and swelling ratio of the films were decreased under the same conditions. The concentration of Mn ions and radiation doses were optimized and found to be 20 ppm and 12 kGy, respectively. The maximum tensile and tear strengths of irradiated rubber films were observed as 29.12 MPa and 44.78 N/mm, respectively at the optimum conditions. The mechanical properties of the films increased markedly with the addition of Mn until they attained the highest values of 33.88 MPa and 54.77 N/mm, respectively. These enhancements, which reached approximately 20% at the most favorable conditions, can be explained by the effect of transition metals in view of Fajan’s rules regarding the covalent character of ionic bonds and suggest that the higher the difference in charges between cation and anion, the higher the ability to form distortion or polarization of ions.     

Gamma-Irradiated Gelatin-Based Films Modified by HEMA for Medical Application

The present article describes the synthesis and characterization of bi-component polymer systems based on gelatin films incorporated with 2-hydroxyethyl methacrylate (HEMA) monomer, developed for medical application. Gelatin films were prepared by the addition of HEMA of different concentrations (0–30 wt.%) and irradiated with various radiation doses (0–5 kGy). Tensile strength and tear strength of the irradiated gelatin films were found to increase with increasing HEMA up to 20 wt.% as well as radiation doses (1 kGy) as optimized. The maximum tensile and tear strengths of irradiated gelatin films with HEMA were found to be 79.1 MPa and 83.2 N/mm, respectively, at the optimum conditions, and these values were about double that of a reference film prepared without additives. In addition, morphological analysis was done by scanning electron microscopy (SEM) and showed how HEMA cemented and was covered with gelatin in the blend. Thermomechanical analysis was carried out to investigate the shifting of glass transition temperature (T_g) towards higher temperature due to HEMA addition, and the effect of this film was tested on the human body in order to determine whether it can be applied for medical purposes.     

Structure activity relationship of bergenin,p-hydroxybenzoyl bergenin, 11-O-galloylbergenin as potent antioxidant and urease inhibitor isolated from Bergenia ligulata

Ethanol extract of the aerial parts of Bergenia ligulata was subjected to solvent–solvent separation followed by various chromatographic techniques that lead to isolation of bergenine (1), p-hydroxybenzoyl bergenin (2), 11-O-galloylbergenin (3) and methyl gallate (4) as major constituents. Ethyl acetate fraction showed a dose-dependent urease inhibitory pattern with IC₅₀ value of 54μg/mL. Structures of compounds 1 and 3 were established by XRD and 2, 4 by NMR. All these compounds were subjected to DPPH scavenging activity, reducing power assay and urease inhibitory activity. The EC₅₀ 7.45 ± 0.2 μg/mL and 5.39 ± 0.28 μg/mL values in terms of antioxidant and reducing power, respectively, were less for 3. Compounds 1–3 showed moderate to significant urease inhibitory potential with IC₅₀ 57.1 ± 0.7, IC₅₀ 48.4 ± 0.3 and 38.6 ± 1.5. Antioxidant activities and urease inhibitory potential were investigated and compound 3 was found to be the most active.     

Synthesis,characterization and bio-activity of a bidentate NS Schiff base of S-allyldithiocarbazate and its divalent metal complexes: X-ray crystal structures of the free ligand and its nickel(II) complex

Transition metal complexes ML₂ (2–6) [where M = Ni(II), Cu(II), Zn(II), Cd(II), Pd(II) and HL = allyl-2-(4-benzyloxyphenylmethylene)hydrazine carbodithioate (1)] have been prepared by the reaction of the ligand with metal ions in 2:1 molar ratio and characterized by physicochemical techniques and spectroscopic methods. The crystal structures of the free ligand and its nickel(II) complex 2 have been determined by X-ray diffractometry. The ligand exists in its thione tautomeric form both in solution and in the solid state. In complex 2, square-planar coordination of nickel(II) was achieved by two chelating ligand moieties coordinating through the azomethine nitrogen and the deprotonated thione sulphur atom. Based on the crystal structures of analogous dithiocarbazate species, a square-planar geometry was assumed for the copper(II) and palladium(II) complexes, and a tetrahedral coordination sphere for the zinc(II) and cadmium(II) derivatives. The in vitro bactericidal activity suggests that the palladium(II) complex is strongly active against two bacteria. The cadmium(II) complex is moderately cytotoxic with an LC₅₀ value of 409 μg/ml, but less active than gallic acid, LC₅₀ = 78 μg/ml.     

Stability-Indicating Densitometric High-Performance Thin-Layer Chromatographic Method for the Quantitative Analysis of Biomarker Naringin in the Leaves and Stems of Rumex vesicarius L.

JPC – Journal of Planar Chromatography – Modern TLC - A simple, sensitive, and stability-indicating high-performance thinlayer chromatography (HPTLC)-densitometric method was developed...