Influence of Process Parameters on the Reaction Kinetics of the Chromium‐Catalyzed Trimerization of Ethylene

In this paper we report the results of an extensive experimental kinetic study carried out on the novel ethylene trimerization catalyst system, comprising the chromium source [CrCl₃(thf)₃] (thf=tetrahydrofuran), a Ph₂P‐N(iPr)‐P(Ph)‐N(iPr)H (PNPNH) ligand (Ph=phenyl, iPr=isopropyl), and triethylaluminum (AlEt₃) as activator. It could be shown that the initial activity shows a first‐order dependency on the ethylene concentration. Also, a first‐order dependency was found for the catalyst concentration. The initial activity follows a typical Arrhenius behavior with an experimentally determined activation energy of 52.6 kJ mol^?1. At elevated temperatures (ca. 80 °C), a significant deactivation was observed, which can be tentatively traced back to a ligand rearrangement in the presence of AlEt₃. After a fast initial phase, a pronounced ‘kink’ in the ethylene‐uptake curve is observed, followed by a slow, almost linear, further increase of the total ethylene consumption. The catalyst composition, in particular the ligand/chromium and the cocatalyst/chromium molar ratio, has a strong impact on the catalytic performance of the trimerization of ethylene.     

Efficient palladium-catalysed carbonylative and Suzuki-Miyaura cross-coupling reactions with bis(di-tert-butylphosphino)-o-xylene

The use of the ligand bis(di-tert-butylphosphino)-o-xylene (dtbpx) in palladium-catalysed carbonylative and Suzuki-Miyaura cross-coupling reactions is described. Aryl and vinyl halides readily entered into the carbonylative catalytic cycle affording carboxylic acids, amides as well as primary, secondary and tertiary esters, respectively, in good yields. Aryl iodides, bromides and chlorides gave high yields of biphenyl products upon reaction with both activated and unactivated boronic acids.     

The effect of harvest periods on the chemical compositions of essential oils of sage (Salvia aucheri L.) leaves

The essential oils of sage leaves (Salvia aucheri Bentham var. canescens Boiss. & Heldr.), growing wild in South Anatolia, were extracted by hydrodistillation and analysed by GC and GC-MS. The percentage yields of the essential oils from sage leaves harvested at different years were 1.0%, 1.3%, 1.3%, 1.0%, 1.4%, 1.5% and 1.2%, respectively. In this study, 1,8-cineole, camphre, camphene α-pinene and β-pinene were identified as the major components of sage leaves collected at different periods. The main constituents of sage oil collected over the years were 1,8-cineole (35.01-48.06%), camphre (13.58-23.92%), camphene (6.77-8.82%), α-pinene (5.79-8.54%) and β-pinene (4.32-6.28%).     

Catalytic conversion of benzene to phenol

Phenol is very useful intermediate in the manufacture of petrochemicals, drugs, agrochemicals, and plastics. Commercially, phenol is produced by a three-step, high-energy consumption process known as the cumene process. The conversion of a chemical to a value-added product is always economically desirable. More than 90% of phenol consumption in the world is manufactured by the multistep cumene process, in which acetone is coproduced in 1: 1 molar ratio with respect to phenol. However, the drawbacks of the three-step cumene process have spurred the development of more economical routes to decrease energy consumption, avoid the formation of explosive cumene hydroperoxide, and increase the yield. The objective of this article is to highlight benzene-to-phenol conversion technologies with emphasis on direct conversion methods. Gas phase and liquid phase reactions are the two main routes for direct oxidation of benzene to phenol. Indirect methods, such as the cumene process, and direct methods of benzene-to-phenol conversion are discussed in detail. Also discussed is the single-step reaction of benzene to phenol using oxidants such as O₂, N₂O, and H₂O₂. Catalytic conversion of benzene to value-added phenol using a chemically converted graphene-based catalyst, a cost-effective carbon material, is discussed.     

Air microwave-induced plasma: Relation between ion density and atomic oxygen density

Electron temperature and ion density are measured in an air microwave-induced plasma (2450 MHz) by means of a floating double probe. A 'cinetic scheme for ion formation and decay is set up, and a relationship between atomic oxygen and ion densities is obtained. From this relationship an order-of-magnitude of atomic oxygen concentration in the discharge is derived and compared with results obtained by optical actinometry in another work.     

Molten sodium nitrite—potassium nitrite eutectic: the reaction of some compounds of molybdenum

Molybdenum(VI) oxide, ammonium molybdate and molybdic acid reacted in molten sodium nitrite—potassium nitrite eutectic to form orthomolybdate, nitrogen dioxide and nitric oxide (with nitrate as a secondary product), a more polymerised polymolybdate being formed as an intermediate product. Tungsten(VI) oxide reacted similarly but less rapidly. Molybdenum and tungsten metals reacted to form the orthoxyanion and nitrogen, the latter metal reacting considerably faster and forming smaller amounts of nitric oxide and nitrous oxide. Reaction temperatures and stoichiometries are given and reaction pathways suggested.     

Synthesis of 1,4‐Diaryl‐piperazine‐2,5‐diones: New Behavior of N,N‐Dimethylformamide Dimethyl Acetal (DMFDMA)

Reactions of chloroacetamides (5) with N,N‐dimethylformamide dimethyl acetal gave 1,4‐diaryl‐piperazine‐2,5‐diones 11a–e in good yield, rather than 1,5‐diaryl‐3,7‐dimethoxy‐1H,5H‐[1,5]diazocine‐2,6‐diones (9a–e).     

Catalytic Activity and Morphological Properties of Ni/MgO Catalysts for the Oxidative Coupling of Methane

The catalytic activity of Ni/MgO catalysts was studied for the oxidative coupling of methane (OCM). The catalysts were characterized using transmission electron microscope (TEM) and XRD. The increase in C2+ selectivity of Ni/MgO was attributed to the presence of bulk dislocations and MgNiO₂ phase. This revised version was published online in June 2006 with corrections to the Cover Date.     

Bismuth Oxyiodide Nanoflakes Showed Toxicity Against the Malaria Vector <Emphasis Type="Italic">Anopheles stephensi</Emphasis> and In Vivo Antiplasmodial Activity

Anopheles stephensi is a mosquito vector of malaria, which is still considered a relevant public health problem due to increasing outdoor transmission, growing resistance to insecticides used to target vectors, and antiplasmodial drugs as well. Thus, there is a vital need to explore novel sources of effective compounds. In this study, the hydrothermal method was used for the synthesis of bismuth oxyiodide (BiOI) nanoflakes. Furthermore, the toxicity of BiOI nanoflakes was evaluated for the first time on A. stephensi, as well as in vivo against the malaria parasite Plasmodium berghei. The synthesis of BiOI nanoflakes was confirmed by various characterization techniques, including X-ray diffraction, Fourier transform-infrared spectroscopy, field emission scanning electron microscopy and transmission electron microscopy (HR-TEM). LC₅₀ of BiOI nanoflakes on A. stephensi were 2.263 ppm (larva I), 3.414 ppm (II), 4.956 ppm (III), 6.983 ppm (IV) and 8.605 ppm (pupae). In vivo antiplasmodial experiments conducted on P. berghei infecting albino mice showed 27.2% of chemosuppression after 4 days of treatment with 300 mg/kg/day of BiOI, a lower performance if compared to chloroquine. Overall, our results suggested that hydrothermal synthesis of BiOI nanoflakes may be considered to develop newer and safer tools for malaria vector control.     

Extractive Desulfurization of Liquid Fuel using Modified Pyrollidinium and Phosphonium Based Ionic Liquid Solvents

In the pursuit of better solvents for use in the extractive desulfurization (EDS) of liquid fuel, the pyrollidinium and phosphonium based ionic liquids (ILs) have been improved by combining them with selected molecular compound modifiers. The modifiers, which are imidazole, poly(ethylene) glycol (PEG 200) and sulfolane were selected to induce previously nonexistent mechanisms in the presence of refractory sulfur compounds. The addition of PEG 200 and sulfolane were observed to have a more positive impact on the performance of the ILs than the addition of imidazole under the same conditions. This provides further support for the idea that π–π interaction may not be the predominant interactions for the ILs that are the highly effective in EDS. Using the sulfolane modified tetrabutylphosphonium methanesulfonate [P₄₄₄₄][MeSO₃], up to 81% dibenzothiophene (DBT) removal was recorded at a temperature of 30 °C and solvent-to-mass ratio of 1:1 and after a 30 min mixing time.