Cobalt(II) Chloride Complex Formation in Acetamide–Calcium Nitrate Tetrahydrate Melts

The absorption spectra of Co(II) chloride complexes, containing variable concentrations of chloride ligand, in a molten mixture of 80 mol% acetamide–20 mol% calcium nitrate tetrahydrate, were studied at 313, 333, 353, and 363 K, in the wavelength range 400-800 nm. The melt contains three possible ligands (CH₃CONH₂, H₂O, and NO₃ ^-) for competition with added chloride ligand. Addition of chloride caused a shift of the absorption maximum of octahedral cobalt(II) nitrate towards lower energies and pronounced changes in the shape of the initial spectrum of cobalt(II) nitrate. The effect of temperature changes on the molar absorption coefficient of the Co(II) species was dependent on the chloride concentration and was attributed to the structural changes occurring in the cobalt(II) species. The STAR and STAR FA programs were applied to identify the complex ionic species and to calculate the stability constants of Co(II) complexes formed in this solvent. The results indicate the highest probability of formation of the following complex species: Co(NO₃)₄ ^2-, Co(NO₃)₂Cl₂ ^2-, and CoCl₄ ^2-. Stability constants of each complex were presented for the equilibria occurring at 313, 333, 353, and 363 K. Distribution of the Co(II) species was also calculated over the ranges of chloride concentration and temperature investigated.     

Migration of radiocesium in a zeolite-solution system

Some properties of natural zeolite from Zaloka gorica, Slovenia, Yugoslavia were investigated to establish its applicability in solidification and for storage purposes of radioactive waste. It was found that this material is a rather good sorber for cesium, with a capacity of about 0.6 meq g^–1. The migration rate of Cs⁺ in a system ion exchanger-aqueous solution was investigated and correlated with the sorption behaviour of cesium in a system. The leaching rate of cesium from concrete containing zeolite was measured.     

A simple procedure for the quantitative microdetermination of rhamnose

Summary A simple spectrophotometric procedure for microdetermination of rhamnose is described. It is based on breakdown of the sugar with sulphuric acid followed by treatment withp-hydroxydiphenyl. The coloured product is measured spectrophotometrically at 560 nm. A linear relationship exists between the amount of rhamnose (10-0g–) and the absorbance. The method is recommended for determination of rhamnose in samples containing rhamnose, different neutral sugars, amino-sugars, sugar alcohols, uronic acids, and muramic acid.

---

Zusammenfassung Ein einfaches spektralphotometrisches Verfahren zur Mikrobestimmung von Rhamnose wurde beschrieben. Es beruht auf der Spaltung des Zuckers mit Schwefelsäure und nachfolgender Behandlung mit p-Hydroxydiphenyl. Das gefärbte Reaktionsprodukt wird spektralphotometrisch bei 560 nm gemessen. Die Extinktion steht mit der Rhamnosemenge in linearer Beziehung. Das Verfahren wird für die Rhamnosebestimmung in Proben empfohlen, die verschiedene Neutralzucker, Aminozucker, Zuckeralkohole, Uronsäuren und Muramsäure enthalten.

     

The stability constant ratios of tri-N-octyl amine hydrochloride and bisulphate

The equilibria between the solution of TOA in toluene and mixtures of sulphuric and hydrochloric acid been studied. They were characterized by ratios of stability constants of amine salts formed in the organic phase.     

New many fold 1,2,3‐selenadiazole aromatic derivatives

The many fold aromatic ketones 2a‐d are versatile compounds for the synthesis of the many fold 1,2,3‐selenadiazole aromatic derivatives 5a‐d . The preparation starts with the reaction between the many fold bromomethylene benzene derivatives 1a‐d and 4‐hydroxyacetophenone, which are transformed through the reaction with semicarbazide hydrochloride or ethylhydrazine carboxylate into the corresponding semicarbazones derivatives 3a‐d or hydrazones 4a‐d . The reaction with selenium dioxide leads to regiospecific ring closure of semicarbazones or hydrazones to give the many fold 1,2,3‐selenadiazole aromatic derivatives in high yield.     

Über Reaktionen von Nitrosophenolen, 3. Mitt.: Reaktion von 2-Nitroso-1-naphthol mit Resorcin und Orcin

Zusammenfassung Die Reaktion von 2-Nitroso-1-naphthol mit Resorcin bzw. Orcin in Äther bei Anwesenheit von HNO₃ liefert Benzo[c]phenoxazon-(9) (I), Benzo[c]phenoxazon-(9)-12-oxid (II), Methyl-benzo[c]phenoxazon-(9) (III) sowie 11-Methyl-benzo[c]phenoxazon-(9)-12-oxid (IV). Die Struktur der isolierten Substanzen wurde durch Reduktion mittels TiCl₃ sowie durch die UV- und IR-Spektren gestützt.

---

The reaction of 2-nitroso-1-naphthol with resorcinol and orcinol in ether solution in the presence of nitric acid has been studied. From the reaction mixture the benzophenoxazones I–IV have been isolated. Structures were assigned on the grounds of UV and IR spectra and partly by using TiCl₃ as a reducing agent.

---

---

Mit 1 Abbildung     

Optimization of a GFAAS method for determination of total inorganic arsenic in drinking water

The new 10 μg l⁻¹ arsenic standard in drinking water has been a spur to the search for reliable routine analytical methods with a limit of detection at the μg l⁻¹ level. These methods also need to be easy to handle due to the routine analyses that are required in drinking water monitoring. Graphite furnace atomic absorption spectrometry (GFAAS) meets these requirements, but the limit of detection is generally too high except for methods using a pre-concentration or separation step. The use of a high-intensity boosted discharge hollow-cathode lamp decreases the baseline noise level and therefore allows a lower limit of detection. The temperature program, chemical matrix modifier and thermal stabilizer additives were optimized for total inorganic arsenic determination with GFAAS, without preliminary treatment. The optimal furnace program was validated with a proprietary software. The limit of detection was 0.26 μg As l⁻¹ for a sample volume of 16 μl corresponding to 4.2 pg As. This attractive technique is rapid as 20 samples can be analysed per hour. This method was validated with arsenic reference solutions. Its applicability was verified with artificial and natural groundwaters. Recoveries from 91 to 105% with relative standard deviation <5% can be easily achieved. The effect of interfering anions and cations commonly found in groundwater was studied. Only phosphates and silicates (respectively at 4 and 20 mg l⁻¹) lead to significant interferences in the determination of total inorganic arsenic at 4 μg l⁻¹.     

Synthesis of Some Novel 2‐Anilinothiophene, 2,3′‐Bithienyl and Thienylthiopyridine Derivatives Resistance to Penicillium Digitatum Effect the Fruit

Reaction of benzotriazol‐1‐yl acetone 1 with phenyl isothiocyanate followed with α‐chloroacetone or ethyl‐α‐chloroacetate afforded 2‐anilinothiophenes 3 or 4 , respectively. Treatment of 3 with malononitrile at different reaction conditions afforded 6 or 7 . Reaction of 1 with CS₂ in DMF and phenacylbromide afforded S‐alkylated thiophene 10 . Reactions of the latter compound with different active methylene nitriles afforded thienylthiopyridine derivatives 14 and 15 . Condensation of 10 with hydrazine hydrate afforded hydrazon derivative 16 . Reaction of thiophene 17 with formamide in DMF afforded 19 which converted to N‐thienylpyrimidine 20 when treated with malononitrile. The structure of the newly synthesized compounds has been established on the basis of their analytical and spectral data. The compounds were also investigated for antibacterial and antifungal activities.     

Heterogeneous reactions of solid nickel(II) complexes

The influence of different modes of preparation on the stoichiometry of thermal decomposition of isothiocyanatonickel(II) complexes with ammonia was studied. It was found that the complex Ni(NCS)₂(NH₃)₄ (I) prepared by heterogeneous reaction undergoes decomposition in two steps (–2 NH₃, –2 NH₃), while for complex II, of the same composition but prepared by homogeneous reaction from solution, the decomposition proceeds in three steps (–1 NH₃, –1 NH₃, –2NH₃). Electronic and infrared absorption spectra were used for the study of the spectral properties of the starting complex. It was found that the different stoichiometries of thermal decompositions of complexes I and II do not cause differences in the bonding strength of the ammonia molecules (chemical factor); this effect is rather brought about by physical factors such as different imperfections of the crystal lattice.

---

Zusammenfassung Der Einfluß der Herstellung auf die Stöchiometrie der thermischen Zersetzung von Amin-Komplexen des Isothiocyanatonickels wurde studiert. Der Zerfall des Komplexes Ni(NCS)₂(NH₃)₄ (I), hergestellt durch heterogene Reaktion, verlief in zwei Etappen (–2 NH₃, –2 NH₃). Beim selben Komplex (II), hergestellt durch homogene Reaktion in Lösung, wurden jedoch drei Etappen beobachtet (–1 NH₃, –1 NH₃, –2 NH₃). Die Eigenschaften des Ausgangsproduktes wurden durch Elektronen- und IR-Spektroskopie untersucht. Das unterschiedliche thermische Verhalten ist nicht auf eine verschiedene Bindungsstärke der NH₃ Moleküle, sondern auf physikalische Ursachen, wie z. B. Unregelmässigkeiten im Kristallgitter zurückzuführen.

---

Résumé On a étudié l'influence des diverses méthodes de préparation sur la stoechiométrie de la réaction de décomposition thermique des complexes de l'isothiocyanate de nickel(II) avec l'ammoniac. On a établi que le complexe Ni(SCN)₂(NH₃)₄, (I), préparé rar réaction hétérogène, subit une décomposition en deux étapes (–2NH₃, –2NH₃), tandis que le complexe (II), de même composition, mais préparé par réaction homogène, à partir de solutions, se décompose en trois étapes (–1NH₃,–1NH₃, –2NH₃). Les propriétés spectrales du complexe initial ont été étudiées par absorption électronique et infrarouge. On a trouvé que les différences de stoechiométrie des réactions de décomposition thermique des complexes (I) et (II) n'apportaient pas de différences entre les énergies de liaison des molécules d'ammoniac (facteur chimique). C'est plutôt à des facteurs physiques, comme les différentes imperfections du réseau cristallin, que cet effet serait dû.

---

(II) . , Ni(NCS)₂(NH₃)₄ (I), , (–2NH₃,–2NH₃). , II , , (–1 NH₃,–1 NH₃ –2NH₃). . , I II ( ), , .

     

Synthesis of well‐designed polymers carrying saccharide moieties via RAFT miniemulsion polymerization

Two hydrophobic vinyl saccharide monomers based on D ‐glucose and D ‐fructose were polymerized by employing the reversible addition‐fragmentation transfer (RAFT) miniemulsion polymerization technique to prepare well‐designed glycopolymers. Three dithiobenzoate‐RAFT agents [S?C(Ph)S? R], 1‐phenylethyl dithiobenzoate (PED), 2‐phenylprop‐2‐yl dithiobenzoate (PPD), and 2‐cyanoprop‐2‐yl dithiobenzoate (CPD), were used to control the growth of polymer chains. The best results were obtained in the presence of the PPD‐RAFT agent and the formed polymers have polydispersity index's (PDI) lower than 1.15. Under adequate miniemulsion polymerization conditions, a glycopolymer with PDI of 1.1 and molecular weight of 5 × 10⁴ g/mol has been successfully synthesized in a short reaction time of 100 min. Furthermore, some block copolymers containing saccharide segment with butyl or methyl methacrylate were prepared. Copyright © 2007 John Wiley & Sons, Ltd.