An EQCM study on the influence of saccharin on the corrosion properties of nanostructured cobalt and cobalt-iron alloy coatings

Nanostructured cobalt (Co) and cobalt-iron (CoFe) alloy coatings were electrodeposited from sulfate solutions in the presence and absence of saccharin. The effects of saccharin on the corrosion behavior of Co and CoFe alloy coatings were investigated using the electrochemical quartz crystal microbalance (EQCM) technique coupled with cyclic voltammetry (CV) measurements. Saccharin was added to the electrolyte as a grain refiner and brightener. Interestingly, opposite corrosion behaviors were found for all nanostructured coatings in 0.1 M H₂SO₄ and 0.1 M NaOH. The use of saccharin as an additive in the plating solution accelerated the anodic reaction for all deposits in acidic medium. The mass decreases while dissolution rate increased with higher saccharin concentration. Meanwhile, formation of a thick passive film on the Co electrode surface were enhanced while a hindering effect was observed for CoFe alloy coatings deposited in the presence of saccharin in alkaline solution. The anodic and cathodic curves obtained from potentiodynamic polarization experiments were also in agreement with the EQCM results.     

Multiple functions of microfluidic platforms: Characterization and applications in tissue engineering and diagnosis of cancer

Microfluidic system, or lab-on-a-chip, has grown explosively. This system has been used in research for the first time and then entered in the clinical section. Due to economic reasons, this technique has been used for screening of laboratory and clinical indices. The microfluidic system solves some difficulties accompanied by clinical and biological applications. In this review, the interpretation and analysis of some recent developments in microfluidic systems in biomedical applications with more emphasis on tissue engineering and cancer will be discussed. Moreover, we try to discuss the features and functions of microfluidic systems.     

Effect of Cactus (Opuntia ficus-indica) and Acacia (Acacia seyal) Gums on the Pasting,Thermal, Textural,and Rheological Properties of Corn,Sweet Potato,and Turkish Bean Starches

This study was planned to explore the locally available natural sources of gum hydrocolloids as a natural modifier of different starch properties. Corn (CS), sweet potato (SPS), and Turkish bean (TBS) starches were mixed with locally extracted native or acetylated cactus (CG) and acacia (AG) gums at 2 and 5% replacement levels. The binary mixtures (starch–gums) were prepared in water, freeze dried, ground to powder, and stored airtight. A rapid viscoanalyzer (RVA), differential scanning calorimeter (DSC), texture analyzer, and dynamic rheometer were used to explore their pasting, thermal, textural, and rheological properties. The presence of acetylated AG or CG increased the final viscosity (FV) in all three starches when compared to starch pastes containing native gums. Plain SPS dispersion had a higher pasting temperature (PT) than CS and TBS. The addition of AG or CG increased the PT of CS, SPS, and TBS. The thermograms revealed the overall enthalpy change of the starch and gum blends: TBS > SPS > CS. The peak temperature (T_p) of starches increased with increasing gum concentration from 2 to 5% for both AG and CG native and modified gums. When compared to the control gels, the addition of 2% CG, either native or modified, reduced the syneresis of starch gels. However, further addition (5% CG) increased the gels’ syneresis. Furthermore, the syneresis for the first cycle on the fourth day was higher than the second cycle on the eighth day for all starches. The addition of native and acetylated CG reduced the hardness of starch gels at all concentrations tested. All of the starch dispersions had higher G′ than G″ values, indicating that they were more elastic and less viscous with or without the gums. The apparent viscosity of all starch gels decreased as shear was increased, with profiles indicating time-dependent thixotropic behavior. All of the starch gels, with or without gums, showed a non-Newtonian shear thinning trend in the shear stress vs. shear rate graphs. The addition of acetylated CG gum to CS resulted in a higher activation energy (Ea) than the native counterparts and the control. More specifically, starch gels with a higher gum concentration (5%) provided greater Ea than their native counterparts.     

Ferroptosis: A New Road towards Cancer Management

Ferroptosis is a recently described programmed cell death mechanism that is characterized by the buildup of iron (Fe)-dependent lipid peroxides in cells and is morphologically, biochemically, and genetically distinct from other forms of cell death, having emerged to play an important role in cancer biology. Ferroptosis has significant importance during cancer treatment because of the combination of factors, including suppression of the glutathione peroxidase 4 (Gpx4), cysteine deficiency, and arachidonoyl (AA) peroxidation, which cause cells to undergo ferroptosis. However, the physiological significance of ferroptosis throughout development is still not fully understood. This current review is focused on the factors and molecular mechanisms with the diagrammatic illustrations of ferroptosis that have a role in the initiation and sensitivity of ferroptosis in various malignancies. This knowledge will open a new road for research in oncology and cancer management.     

On Galerkin models for transport in groundwater

The Galerkin finite element model (GFEM) may provide oscillatory results when employed to predict contaminant transport in groundwater unless a very fine mesh is used. Adaptation of a very fine mesh may make the application of the GFEM impractical to field problems. The Petrov—Galerkin finite element models (PGFEMs) can provide oscillation free results for relatively coarser mesh. However, the PGFEM violates the Galerkin principle and introduces large “numerical” dispersion. The objective of this paper has been to develop accurate criteria to improve the applicability of the GFEM to obtain oscillation free accurate results for coarser mesh and compare its performance with that of the PGFEM. It has been shown that the GFEM provides oscillation free accurate results for coarser mesh with Peclet number Pe 20. Further, the GFEM prediction has always been more accurate than the PGFEM for a variety of source configurations and flow fields.     

Adsorption sensitivity of pristine and Al- or Si-doped boron nitride nanoflake to COCl2: a DFT study

ABSTRACT

The adsorption of phosgene (COCl₂) on pristine, Al- and Si-doped boron nitride nanoflakes (BNNFs) is studied using density functional theory calculations. The adsorption energies of the most stable complexes, formed from interaction between COCl₂ and the pristine, Al- and Si-doped BNNFs are ?28.97, ?78.71 and ?171.60?kJ/mol at the M06-2X/6-31?+?G* level of theory, respectively. It is found that COCl₂ experiences a chemisorption interaction over the doped BNNFs, significantly altering its structure with respect to the gas-phase molecule. The COCl₂ adsorption can also induce a change in the HOMO–LUMO or SOMO–LUMO energy gap of the surface. In particular, the adsorption of COCl₂ is found to decrease the HOMO–LUMO energy gap of Al-doped BNNF by about 30%. It is suggested that the Al- or Si-doped BNNFs can be considered as a potential material for detecting toxic COCl₂.     

Numerical estimation of mixed convection heat transfer in vertical helically coiled tube heat exchangers

A numerical investigation of the mixed convection heat transfer from vertical helically coiled tubes in a cylindrical shell at various Reynolds and Rayleigh numbers, various coil‐to‐tube diameter ratios and non‐dimensional coil pitches was carried out. The particular difference in this study compared with other similar studies is the boundary conditions for the helical coil. Most studies focus on constant wall temperature or constant heat flux, whereas in this study it was a fluid‐to‐fluid heat exchanger. The purpose of this article is to assess the influence of the tube diameter, coil pitch and shell‐side mass flow rate on shell‐side heat transfer coefficient of the heat exchanger. Different characteristic lengths were used in the Nusselt number calculations to determine which length best fits the data and finally it has been shown that the normalized length of the shell‐side of the heat exchanger reasonably demonstrates the desired relation. Copyright © 2010 John Wiley & Sons, Ltd.     

Action du N-bromosuccinimide sur les dioxolannes en série bicyclo [2.2.1 ]heptanique. Limitation des transpositions de wagner-meerwein

Vicinal benzoyloxy-trans-bicyclo [2.2.1] heptanic bromhydrins, otherwise difficult to obtain are formed from N-bromosuccinimide and norbornanes bearing a 2-aryl-1,3 dioxolane skeleton. The greater stability of the intermediate dioxolenium ion reduces the tendency towards both Wagner-Meerwein rearrangement and neighbouring group participation by chlorine, processes usually observed when a less stable intermediate is involved. Nevertheless, methoxycarbonyl neighbouring group participation and Wagner Meerwein rearrangment occur in methoxycarbonylbicyclo [2.2.1]heptane and in a bornanic compound respectively.