Adsorption and Micellization Behavior of Cationic Surfactants (Gemini and Conventional)—Amphiphilic Drug Systems

In the present work, the behavior of mixed drug–surfactant systems has been studied by surface tension measurements. The drug used in this work is adiphenine hydrochloride (ADP) and the surfactants are of m-s-m type geminis, i.e., alkanediyl-α,ω-bis(dimethylalkylammonium bromide), with m = (14, 16), s = (4, 5, 6), and conventional alkyltrimethylammonium bromides (CTAB, TTAB). The excess surface concentration (Γ _max ) increases and the minimum head group area at the air/water interface (A _min) decreases with increasing concentration of surfactant in the drug solution. Both the critical micelle concentration (cmc) and ideal cmc (cmc*) values decrease with mole fraction of surfactants. Also, the cmc values are lower than cmc*, indicating attractive interactions are present in the mixed micelles. The mole fractions of surfactant in the micelles $ \left( {X_{1}^{m} } \right) $ and monolayers $ \left( {X_{1}^{\sigma } } \right) $ , as well as the respective interaction parameters ( $ \beta^{m} $ , $ \beta^{\sigma } $ ), indicate that monolayer formation is easier than micelle formation due to the rigid hydrophobic part of the drug.     

Measurement of natural radioactivity in soil from Peshawar basin of Pakistan

Natural radioactivity in the environment may change with time due to human activities, chemical and biological changes. From the view of radiation risk to population, the knowledge of natural radioactivity levels and the measurement of collective radiation dose received by the population is very vital. Radiological constraints on soil of thickly populated Peshawar basin in northern Pakistan were assessed through radiometric assay. Soil samples collected from different locations of four districts of this basin were analysed using an HPGe gamma spectrometer. Activity concentrations of ⁴⁰K, ²²⁶Ra and ²³²Th in these samples was 648 ± 121 (421–996), 45 ± 7 (32–60) and 59 ± 7 (46–72) Bq kg^?1, respectively that followed lognormal distribution. The average concentrations of primordial radionuclides were found to be higher than that reported for the worldwide soil. Radium equivalent activity and gamma index derived from these activity concentrations were lesser than their respective limits. The average absorbed dose rate and the annual effective dose for both indoor and outdoor cases were found to be higher than the values given in the UNSCEAR 2000 report. The results of the present study were compared with those for other locations of Pakistan along with that for the world. The radiological impact of the measured data was evaluated using hazard assessment models. A thoughtful discussion of the above mentioned evaluation is also given.     

Micelle-Catalyzed Interaction Between [Ni(II)-Gly-Gly]+ and Ninhydrin

The effect of cationic micelles of cetyltrimethyl ammonium bromide (CTAB) on the observed pseudo-first-order rate constant for the interaction of nickel dipeptide complex [Ni(II)-Gly-Gly]⁺ with ninhydrin has been studied spectrophotometrically. At constant temperature and pH, increase in the [CTAB] from 0.0 to 60.0 × 10^?3 mol dm^?3 caused nearly three-fold increase of the rate constant. The micellar catalysis is explained in terms of the pseudophase model. From the observed kinetic data, binding constants of micelle–[Ni(II)-Gly-Gly]⁺ (K _S), and micelle–ninhydrin (K _N) are evaluated, respectively, to be 5.3 mol^?1 dm³ and 84.0 mol^?1 dm³. The role of added inorganic (NaCl, NaBr, Na₂SO₄) and organic salts (NaBenz, NaSal) on the reaction rate has also been examined.     

Effect of Phosphate on Glucosamine Production by Ethanolic Fungus Mucor indicus

In this study, the effect of phosphorous compound concentration on the production of glucosamine by Mucor indicus was investigated. Changes in the yield of ethanol, the major metabolite of the fungus, were also followed besides. The alkali insoluble material of the biomass of the fungus mainly contained phosphates and polymers of glucosamine and N-acetyl glucosamine, i.e., chitin and chitosan. Yields of glucosamine (78–113 g/kg dry fungal biomass) and ethanol (200–370 g/kg glucose) were significantly affected by the phosphorous concentration. The results showed that lower concentrations of phosphorous favored the production of glucosamine while higher ethanol as well as biomass yields was obtained at higher concentrations. The best concentration was 0.5 g/l where glucosamine yield was 0.37 g/l (11 % of the biomass). At this phosphate concentration, ethanol and biomass yields were 360 and 76 g/kg glucose, respectively. On average, proteins comprised 51.5 % of the biomass. Glycerol was the second important metabolite during the fermentation by the fungus which appeared at lower yields (20–34 g/kg glucose).     

A hybrid nanofluid analysis near a parabolic stretched surface

Two dimensional incompressible steady viscous nano-fluid flow with the impacts of heat generation and porous medium is examined numerically. For this objective Ti₆Al₄v are taken as nano-particles dispersed in different base fluids such as methanol, engine oil and water. Basically in this study we will compare three different nano-fluids to assess their flow behaviour and thermal performance. The flow model is developed under certain assumptions. The two dimensional non-linear PDEs are converted into non-linear ODEs with suitable transformation. The numerical procedure is adopted to find the results by using Bvp4c technique in MATLAB. Moreover, graphs are generated for various parameters against the temperature and velocity profiles. The fluid behaviour for different parameter is examined on velocity and temperature profile. It is depicted that for high values of volume fraction and curvature parameter nano-particles leads to high velocity and temperature profile. Moreover, velocity profile decreases for permeability parameter, while temperature profile enhances for heat generation parameter. The influence of Nusselt number and skin friction also assessed. The model of entropy generation is also presented.     

Aggregation and microenvironmental properties of gemini and conventional mixed surfactants systems: A fluorometric study

Aggregation behavior of cationic gemini (hexanediyl-1,5-bis(dimethylcettylammonium bromide) (16-5-16)) surfactant with conventional single chain surfactants cetyltrimethylammonium bromide (CTAB) and tetradecyltrimethylammonium bromide (TTAB) were studied with the help of fluorescence measurements. Fluorescence probe is a proficient technique for examining the surfactant-surfactant interaction and aggregation. The micelle aggregation number (N _agg) was measured using steady-state fluorescence quenching method. The micelle aggregation numbers of binary combinations fall between those of constituent surfactants. The micropolarity (I ₁/I ₃), binding constant (K _sv) and dielectric constant (D _exp) of mixed systems were determined from the ratio of peaks intensity in the pyrene fluorescence spectrum. The I ₁/I ₃ values were found to be more than >1, showing more polar environment around pyrene in the mixed micelle as compared to the pure micelles.     

Multiple functions of microfluidic platforms: Characterization and applications in tissue engineering and diagnosis of cancer

Microfluidic system, or lab-on-a-chip, has grown explosively. This system has been used in research for the first time and then entered in the clinical section. Due to economic reasons, this technique has been used for screening of laboratory and clinical indices. The microfluidic system solves some difficulties accompanied by clinical and biological applications. In this review, the interpretation and analysis of some recent developments in microfluidic systems in biomedical applications with more emphasis on tissue engineering and cancer will be discussed. Moreover, we try to discuss the features and functions of microfluidic systems.     

Ferroptosis: A New Road towards Cancer Management

Ferroptosis is a recently described programmed cell death mechanism that is characterized by the buildup of iron (Fe)-dependent lipid peroxides in cells and is morphologically, biochemically, and genetically distinct from other forms of cell death, having emerged to play an important role in cancer biology. Ferroptosis has significant importance during cancer treatment because of the combination of factors, including suppression of the glutathione peroxidase 4 (Gpx4), cysteine deficiency, and arachidonoyl (AA) peroxidation, which cause cells to undergo ferroptosis. However, the physiological significance of ferroptosis throughout development is still not fully understood. This current review is focused on the factors and molecular mechanisms with the diagrammatic illustrations of ferroptosis that have a role in the initiation and sensitivity of ferroptosis in various malignancies. This knowledge will open a new road for research in oncology and cancer management.     

Effect of Cactus (Opuntia ficus-indica) and Acacia (Acacia seyal) Gums on the Pasting,Thermal, Textural,and Rheological Properties of Corn,Sweet Potato,and Turkish Bean Starches

This study was planned to explore the locally available natural sources of gum hydrocolloids as a natural modifier of different starch properties. Corn (CS), sweet potato (SPS), and Turkish bean (TBS) starches were mixed with locally extracted native or acetylated cactus (CG) and acacia (AG) gums at 2 and 5% replacement levels. The binary mixtures (starch–gums) were prepared in water, freeze dried, ground to powder, and stored airtight. A rapid viscoanalyzer (RVA), differential scanning calorimeter (DSC), texture analyzer, and dynamic rheometer were used to explore their pasting, thermal, textural, and rheological properties. The presence of acetylated AG or CG increased the final viscosity (FV) in all three starches when compared to starch pastes containing native gums. Plain SPS dispersion had a higher pasting temperature (PT) than CS and TBS. The addition of AG or CG increased the PT of CS, SPS, and TBS. The thermograms revealed the overall enthalpy change of the starch and gum blends: TBS > SPS > CS. The peak temperature (T_p) of starches increased with increasing gum concentration from 2 to 5% for both AG and CG native and modified gums. When compared to the control gels, the addition of 2% CG, either native or modified, reduced the syneresis of starch gels. However, further addition (5% CG) increased the gels’ syneresis. Furthermore, the syneresis for the first cycle on the fourth day was higher than the second cycle on the eighth day for all starches. The addition of native and acetylated CG reduced the hardness of starch gels at all concentrations tested. All of the starch dispersions had higher G′ than G″ values, indicating that they were more elastic and less viscous with or without the gums. The apparent viscosity of all starch gels decreased as shear was increased, with profiles indicating time-dependent thixotropic behavior. All of the starch gels, with or without gums, showed a non-Newtonian shear thinning trend in the shear stress vs. shear rate graphs. The addition of acetylated CG gum to CS resulted in a higher activation energy (Ea) than the native counterparts and the control. More specifically, starch gels with a higher gum concentration (5%) provided greater Ea than their native counterparts.