CPT symmetry in honeycomb lattices and quantum brachistochrone problem

In this paper, we have provided a matrix Hamiltonian model for honeycomb lattices and subsequently obtained the dispersion relation. Furthermore, we have constructed the C operator for the given non-Hermitian Hamiltonian model. The quadratic surfaces are sketched and the quantum Brachistochrone problem is discussed for the given honeycomb lattice model.     

Characterization of Co-evaporated Cu-Ag-In-Se Thin Films

In this study, annealing effect on the structural, electrical, and optical characteristics of the quaternary Cu-Ag-In-Se (CAIS) thin films was investigated. These samples were deposited by co-evaporation of the Cu, Ag, In₂Se₃, and Se sources at the substrate temperature of 300 °C. The structural properties of the thin films were analyzed by means of X-ray diffraction, and the results indicated that all of the films were in the polycrystalline structure with the preferred orientation along (112) direction. From the optical measurements, the band gap values were found to vary between 1.38 and 1.45 eV with annealing processes. The temperature-dependent electrical conductivity of the samples was measured in the temperature range of 90–400 K. The films gained degenerate behavior with increasing annealing temperature. The carrier conduction mechanism was determined at high- and low-temperature regions by comparing thermionic emission and hopping parameters. Photoconductivity of the as-grown film showed that there was an increase in conductivity with increasing illumination intensity. From this measurement, the variation of photocurrent as a function of illumination intensity was determined.     

Kaluza–Klein reduction of a quadratic curvature model

Palatini variational principle is implemented on a five dimensional quadratic curvature gravity model, rendering two sets of equations, which can be interpreted as the field equations and the stress-energy tensor. Unification of gravity with electromagnetism and the scalar dilaton field is achieved through the Kaluza–Klein dimensional reduction mechanism. The reduced curvature invariant, field equations and the stress-energy tensor are obtained in the actual four dimensional spacetime. The structure of the interactions among the constituent fields is exhibited in detail. It is shown that the Lorentz force density naturally emerges from the reduced field equations and the equations of the standard Kaluza–Klein theory are demonstrated to be intrinsically contained in this model.     

On the mechanism of the N,N‐dimethyl amination of Grignard reagents: a kinetic study

A direct kinetic study is reported for the electrophilic amination of substituted phenylmagnesium bromides with N,N‐dimethyl O‐(mesitylenesulfonyl)hydroxylamine in THF. Rate data, Hammett relationship, and activation entropy are consistent with a S_N2 displacement involving the attack of carbanions to sp³N in the amination reagent (AR). Copyright © 2007 John Wiley & Sons, Ltd.     

Simulating listener errors in using genetic algorithms for perceptual optimization

The genetic algorithm (GA) was previously suggested for fitting hearing aid or cochlear implant features by using listener's subjective judgment. In the present study, two human factors that might affect the outcome of the GA when used for perceptual optimization were explored with simulations. Listeners with varying sensitivity in discriminating sentences of different intelligibility and with varying error rates in entering their judgment to the GA were simulated. A comparison of the simulation results with the results from human subjects reported by Ba?kent et al. Ear Hear. 28(3) 277-289 (2007) showed that these factors could reduce the performance of the GA considerably.     

Cryogenic radiometer based absolute spectral power responsivity calibration of integrating sphere radiometer to be used in power measurements at optical fiber communication wavelengths

This paper covers the absolute spectral power responsivity calibration of spectralon-coated Integrating Sphere Radiometer (ISR) equipped with 3 mm diameter InGaAs photodiode to be used as a transfer standard in fiber optic power measurements against Electrical Substitution Cryogenic Radiometer (ESCR) in Optics Laboratory of National Metrology Institute (TUBITAK UME) of Turkey. The initial uncertainty arising from the use of the Electrically Calibrated Pyroelectric Radiometer (ECPR) as a transfer standard in radiometric scale is 0.5% (k=2), which particularly comes from irregularity in the surface homogeneity of ECPR. In order to eliminate the ECPR step as well as its initial uncertainty contribution in fiber optic power measurements, the calibration application herein was carried out. Moreover power stabilization measurements of DFB laser sources at both 1309.1 nm and 1549.0 nm, the beam size determinations, and spectral analyses of these laser sources as well as spatial and angular dependence of spectral responsivities of the ISR were presented in this paper. The total expanded uncertainties were calculated as 0.283% and 0.315% in the determination of absolute spectral power responsivities of the ISR for 1309.1 nm and 1549.0 nm wavelengths respectively (k=2).     

Non-gravitating scalars and spacetime compactification

We discuss role of partially gravitating scalar fields, scalar fields whose energy–momentum tensors vanish for a subset of dimensions, in dynamical compactification of a given set of dimensions. We show that the resulting spacetime exhibits a factorizable geometry consisting of usual four-dimensional spacetime with full Poincaré invariance times a manifold of extra dimensions whose size and shape are determined by the scalar field dynamics. Depending on the strength of its coupling to the curvature scalar, the vacuum expectation value (VEV) of the scalar field may or may not vanish. When its VEV is zero the higher-dimensional spacetime is completely flat and there is no compactification effect at all. On the other hand, when its VEV is nonzero the extra dimensions get spontaneously compactified. The compactification process is such that a bulk cosmological constant is utilized for curving the extra dimensions.     

Multi‐crystalline silicon solar cells with metal‐assisted nano‐texturing using HNO3 as hole injection agent

In this study, metal‐assisted etching (MAE) with nitric acid (HNO₃) as a hole injecting agent has been employed to texture multi‐crystalline silicon wafers. It was previously proven that addition of HNO₃ enabled control of surface texturing so as to form nano‐cone shaped structures rather than nanowires. The process parameters optimized for optically efficient texturing have been applied to multi‐crystalline wafers. Fabrication of p‐type Al:BSF cells have been carried out on textured samples with thermal SiO₂/PECVD‐SiN_x stack passivation and screen printed metallization. Firing process has been optimized in order to obtain the best contact formation. Finally, j_sc enhancement of 0.9 mA/cm² and 0.6% absolute increase in the efficiency have been achieved. This proves that the optimized MAE texture process can be successfully used in multi‐crystalline wafer texturing with standard passivation methods.

J –V curves and SEM images of the nano and iso‐textured samples. j_sc enhancement of 0.9 mA/cm² together with 0.6% absolute efficiency gain was observed on nano‐textured samples.     

Critical Behavior of the Blume-Emery-Griffiths Model for a Simple Cubic Lattice on the Cellular Automaton

The spin-1 Ising model with the nearest-neighbour bilinear and biquadratic interactions and single-ion anisotropy is simulated on a cellular automaton which improved from the Creutz cellular automaton (CCA) for a simple cubic lattice. The simulations have been made for several k=K/J and d=D/J in the 0≤d<3 and −2≤k≤0 parameter regions. We confirm the existence of the re-entrant and the successive re-entrant phase transitions near the phase boundary. The phase diagrams characterizing phase transitions are presented for comparison with those obtained from other calculations. The static critical exponents are estimated within the framework of the finite-size scaling theory at d=0, 1 and 2 in the interval −2≤k≤0. The results are compatible with the universal Ising critical behavior.