Re-examination of the anodic oxidation of N,N-dimethylaniline, using parametric method 3

A semi-empirical calculation (PM3) was applied to elucidate the anodic oxidation mechanism of N,N-dimethylaniline (DMA) and the dimerization of a cation radical (A) derived from DMA was ruled out. The heat of reaction value of the dimerization of A was 42.43 kcal/mol. We propose the following. Cation radical A reacts with DMA to generate another cation radical (D). This reaction was exothermic and the heat of reaction value and the activation energy were -0.35 kcal/mol and 1.31 kcal/mol, respectively. Deprotonation of D by DMA gives neutral radical (E), which is oxidized to TMB by A. All these reactions were exothermic.     

Electrooptics of beta-FeOOH particle in aqueous media 2. Field-strength dependence of decay and steady-state birefringence, and the hydrodynamic and electrooptic properties

Steady-state and decay birefringence, expressed in terms of the optical phase retardation per cell length delta/d, was measured on beta-FeOOH in aqueous ionic media at 633 nm and at 25 degrees C by an electric square-pulse technique over a wide range of field strength E to ca. 6 kV/cm. The field-strength dependence of both delta/d and field-free rotational relaxation time tau was determined at the sample concentrations between 0.0011 and 0.055 g/L and in the 0.02-2.0 mM NaCl concentration range. Extrapolation of both delta/d and tau values to infinitely high fields (E(2)-->infinity) could yield birefringence- and weight-average quantities, respectively. Observed tau values were decreased at weak fields but leveled off to ca. 0.3 ms at very high fields due to a slight polydispersity regarding the length and volume of particles. The weight-average relaxation time tau(w) was calculated with Perrin's expressions theoretically from the length, width, and volume of beta-FeOOH particles estimated in the dried state from electron micrograph. These quantities were variously averaged. The size distribution was discussed in terms of observed discrete histogram and theoretical (Weibull and Lansing-Kraemer) distribution functions. The sign of observed delta/d value was always positive. The infinitely high-field (delta/d)(infinity) values and the reduced optical anisotropy factor Delta g/n were evaluated by fitting to theoretical orientation functions. The intrinsic birefringence (n3-n1) could be estimated with the mean refractive index n(p) reported in the literature. For the spindle-shaped particle with an axial ratio of ca. 4, the sign of Delta g/n is always positive, whereas the quantity (n3-n1) was either negative (n(p) > 2.35) or positive (n(p) < 2.05) in sign or nearly zero (ca. n(p) = 2.26), depending critically on the n(p) values.     

Botryoidal assembly of cholesteryl-pullulan/poly(N-isopropylacrylamide) nanogels

Hybrid nanogels consisting of cholesteryl-modified pullulan (CHP) and poly(N-isopropylacrylamide) (PNIPAM) were synthesized by graft free-radical copolymerization of N-isopropylacrylamide (NIPAM) onto methacryloyl-substituted CHP nanogels (CHPMA) in water at 50 degrees C in the presence of a water-soluble free radical initiator. Depending on the initial NIPAM/CHPMA ratio, CHP-PNIPAM (CN) nanogels containing 30.8-84.8 wt % PNIPAM were obtained in the form of self-assembled nanoparticles with a hydrodynamic radius (Rh) of 69.0-116.0 nm in water kept at 20 degrees C. Hybrid nanogels of sufficiently high NIPAM content, such as the sample CN90, which contains 79.6 wt % NIPAM, exhibited a two-step response to changes in solution (3 mg/mL) temperature: a decrease in Rh from 93 to 57 nm as the temperature increased from 20 to 35 degrees C, followed by a sharp increase in Rh from 57 nm to 90 nm at 55 degrees C. Both steps in this temperature response were reversible. The multistep response to temperature of the CN nanogels was attributed to the morphology of the nanogels, which are seen as consisting of grape-like (botryoidal) clusters of associated native nanogels held together via cholesteryl cross-linking points and held together by the grafted PNIPAM chains.     

Syntheses, structures and antimicrobial activities of water-soluble silver(I)-oxygen bonding complexes with chiral and racemic camphanic acid (Hca) ligands

Water-soluble, relatively light-stable, chiral and achiral silver(I) complexes [[Ag(2)(ca)(2)]](n) and [[Ag(2)(ca)(2)(Hca)(2)]](n)(R- and S-Hca =(1R,4S)- and (1S,4R)-4,7,7-trimethyl-3-oxo-2-oxabicyclo[2.2.1]heptane-1-carboxylic acid, respectively) prepared from the reaction of Ag(2)O with chiral and racemic Hca in 1:2 and 1:4 molar ratios were characterized by elemental analysis, TG/DTA, FTIR, and solution ((1)H, (13)C and (109)Ag) and solid-state ((13)C) NMR spectroscopy. Crystallography revealed that unique 2(1) helical polymer and zigzag structures were formed on self-assembly of the dimeric units in the crystals of [[Ag(2)(S-ca)(2)]](n) and three [[Ag(2)(ca)(2)(Hca)(2)]](n). In the crystal of [[Ag(2)(S-ca)(2)]](n) two 2(1) helices and a loop were observed in the stair-like polymer structure, whereas zigzag and a loop were seen in the crystals of three [[Ag(2)(ca)(2)(Hca)(2)]](n). Carbon NMR spectra in the solid state and in D(2)O indicated that these polymeric structures were loosely bound and fast ligand-exchange reactions took place in aqueous solution. The complexes, [[Ag(2)(ca)(2)]](n) and [[Ag(2)(ca)(2)(Hca)(2)]](n), showed a wide spectrum of effective antimicrobial activity as anticipated for weak silver(i)-O bonding complexes. Similar antimicrobial activity of [[Ag(2)(ca)(2)]](n) and [[Ag(2)(ca)(2)(Hca)(2)]](n) against selected microorganisms suggested that ligand exchangeability played an important role as well as the coordination geometry of the silver(i) ion.     

Rate enhancement by water in a TiCl4-mediated stereoselective vinylogous Mukaiyama aldol reaction

A remarkable enhancement in the rate of a TiCl₄-mediated stereoselective vinylogous Mukaiyama aldol reaction (VMAR) using vinylketene silyl N,O-acetal 1 was observed in the presence of water.     

Radiation-induced polymerization of cyclohexene sulfide in the solid state

Radiation-induced solid-state polymerization of cyclohexene sulfide has been investigated. Differential thermal analysis shows that this compound has a phase transition point at ?74°C and behaves as a plastic crystal in the temperature range from ?74 to ?20°C (melting point). By rapid cooling, this plastic crystal was easily supercooled, and below ?166°C a glassy crystal, i.e., a supercooled nonequilibrium state of plastic crystal, was obtained. In-source polymerization proceeded in the plastic crystalline state. Postpolymerization of glassy crystalline monomer irradiated at ?196°C occurred above ?166°C (glass transition point) during subsequent heating.     

Cationic copolymerization of indene with styrene derivatives: Synthesis of random copolymers of indene with high molecular weight

Random copolymers with high molecular weights of indene and p‐methylstyrene (pMeSt) were synthesized by cationic polymerization with trichloroacetic acid/tin tetrachloride in CH₂Cl₂ at low temperatures. When indene and pMeSt (1:1 v/v), for example, were polymerized at ?40 °C, both monomers were consumed at very similar rates to give a copolymer with high molecular weight [number‐average molecular weight (M_n): 8–9 × 10⁴]. This is indeed quite unexpected behavior for the combination of these two monomers because pMeSt polymerized over 1000 times faster than indene in the homopolymerization under the reaction conditions previously described. The product copolymer of indene and pMeSt had a random monomer sequence in it that was confirmed by NMR analyses and thermal‐property measurements. In sharp contrast with pMeSt, styrene and p‐chlorostyrene, which have no electron‐donating groups on the phenyl ring, led to low molecular weight polymers (M_n < 10,000) in the copolymerization with indene (1:1 v/v). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2449–2457, 2002     

Ion chromatographic system with a novel switching suppression device

Ion chromatography (IC) has been a powerful tool for measuring ionic species in environmental samples such as tap, river and drain waters. Suppressor modules (membrane and disposable column types) have been used for reducing the background of a baseline. A new type of suppressor device, which has a suppressor resin and switching valve was developed. Fresh ionic resin is introduced into a groove for each analysis to perform the suppression of the working eluent. The eluent composition for obtaining higher sensitivity and better resolutions among ionic species and carbonate ion was also investigated. Although carbonate buffers are used for ion separation in general, the separation of carbonate ion from other ions was not achieved. A borate eluent resulted in good resolutions and higher sensitivity. A new column was also developed for obtaining higher column efficiency and resolution. The optimization of anion separation using a new IC system (IC-2001) that consists of a new suppressor device, an anion-exchange column (TSKgel SuperIC-Anion, 150x4.6 mm), an autosampler, a conductivity cell and a pump in a compact module is described.