Ni thin films vacuum-evaporated on polyethylene naphthalate substrates with and without the application of magnetic field

We study the structural properties of the surface roughness, the surface mound size and the interfacial structure in Ni thin films vacuum-deposited on polyethylene naphthalate (PEN) organic substrates with and without the application of magnetic field and discuss its feasibility of fabricating quantum cross (QC) devices. For Ni/PEN evaporated without the magnetic field, the surface roughness decreases from 1.3 nm to 0.69 nm and the surface mound size increases from 32 nm to 80 nm with the thickness increased to 41 nm. In contrast, for Ni/PEN evaporated in the magnetic field of 360 Oe, the surface roughness tends to slightly decrease from 1.3 nm to 1.1 nm and the surface mound size shows the almost constant value of 28-30 nm with the thickness increased to 35 nm. It can be also confirmed for each sample that there is no diffusion of Ni into the PEN layer, resulting in clear Ni/PEN interface and smooth Ni surface. Therefore, these experimental results indicate that Ni/PEN films can be expected as metal/insulator hybrid materials in QC devices, leading to novel high-density memory devices.     

Crystallization Behavior of Sol-Gel Derived Films by Self-Seeding Process

We propose the novel preparation method, Self-seeding Process, based on the following concept for low temperature crystallization of oxide films. Introduction of desirable inhomogeneity should give lowering of a crystallization temperature through heterogeneous nucleation accompanied with reduced activation energy. We carried out inspection of the above concept through use of PZT films. PZT gel films with the desirable inhomogeneity of microstructure were prepared, and their crystallization behaviors was examined. The PZT film was successfully crystallized at 500°C by the self-seeding process. The single phase (001) oriented PZT film with 0.55 m in thickness was obtained at 550°C for 5 min. The self-seeding process by microstructure control is efficient for the low temperature process of the oxide thin film.     

New concept of solute distribution around a diffusive crystal-solution interface of a binary Lennard-Jones mixture from the viewpoint of molecular dynamics

Directional crystallization from a binary mixture was performed by pseudo-NpT ensemble molecular dynamics. The initial crystal phase having a face-centered-cubic (fcc) structure grew toward the whole cell according to the temperature gradient in the universal cell. The growing crystal phase was not planar even though the solute molecules grew in two-dimensional coordinates because the solvent molecules disturbed the crystallization of the solute molecules at the diffusive crystal-solution interface. This represented the essential phenomenon of solute distribution during crystallization. Consequently, the growing crystal phase still contained solvent molecules having a liquid structure. The time change of the solute composition in the early phase of crystal growth showed an increase in solute composition as the time step proceeded. The resulting solute composition in this early phase was considered at different temperature gradients in the universal cell and it increased as the temperature of the initial crystal-solution interface increased. A new distribution coefficient model was proposed as a function of the difference between the local solute composition and bulk solute composition in the solution around the crystal-solution interface. The impurity-solvent distribution coefficient could be represented by the new model for faster growth of the lower temperature's initial interface. As regards a better distribution coefficient, there was found to be a very dilute solution phase over the crystal phase. The new variable "distribution rate" instead of the ambiguous variable "growth rate" was considered as a function of temperature gradient in the universal cell.     

Infrared multiphoton dissociation spectroscopic analysis of peptides and oligosaccharides by using fourier transform ion cyclotron resonance mass spectrometry with a midinfrared free-electron laser

The fragmentation of peptides and oligosaccharides in the gas phase was investigated by means of electrospray ionization Fourier transform ion cyclotron resonance (FTICR) mass spectrometry coupled with dissociation by a laser-cleavage infrared multiphoton dissociation (IRMPD) technique. In this technique, an IR free-electron laser is used as a tunable source of IR radiation to cause cleavage of the ionized samples introduced into the FTICR cell. The gas-phase IRMPD spectra of protonated peptides (substance P and angiotensin II) and two sodiated oligosaccharides (sialyl Lewis X and lacto-N-fucopentaose III) were obtained over the IR scan range of 5.7-9.5 microm. In the IRMPD spectra for the peptide, fragment ions are observed as y/b-type fragment ions in the range 5.7-7.5 microm, corresponding to cleavage of the backbone of the parent amino acid sequence, whereas the spectra of the oligosaccharides have major peaks in the range 8.4-9.5 microm, corresponding to photoproducts of the B/Y type.     

High-performance liquid chromatography of coenzyme Q-related compounds and its application to biological materials

A convenient and precise method for the separation and determination of coenzyme Q (CoQ)-related compounds (CoQ homologues, plastoquinone-9, ubichromenol-9, etc.) was developed using high-performance liquid chromatography (HPLC). All compounds tested were separated using a reverse-phase column with a suitable mobile phase and detected at a wavelength of 275 nm. CoQ extracts in plasma and erythrocytes were purified by thin-layer chromatography prior to HPLC analysis, but such purification was not necessary when determining CoQ in urine and tissues. Hydroquinone forms of CoQ existing in animal tissues were oxidized to the corresponding quinone forms with potassium hexacyanoferrate(III). This HPLC method was applied satisfactorily to the determination of the contents of CoQ homologues in human and animal samples. CoQ10 was the only homologue detected in human samples, and CoQ8, CoQ9 and CoQ10 were native homologues of CoQ in rat tissues. Ubichromenol-9 and plastoquinone-9 were not detected in these samples.     

Blockade of inflammatory responses by a small-molecule inhibitor of the Rac activator DOCK2

1. Download : Download high-res image (273KB)
2. Download : Download full-size image

Highlights? CPYPP binds to DOCK2 DHR-2 domain and inhibits its catalytic activity ? CPYPP inhibits DOCK2-mediated Rac activation in cells ? The structural features of CPYPP required for its inhibitory effect were revealed ? CPYPP inhibits lymphocyte migration and activation in vitro and in vivo     

Fragmentation study of peptides using Fourier transform ion cyclotron resonance with infrared multiphoton dissociation: experiment and simulation

In this study, the fragmentation of gas-phase protonated Angiotensin II is investigated using electrospray ionization (ESI), Fourier-transform ion cyclotron resonance (FT-ICR), and mass spectrometry (MS) with a laser cleavage infrared multiphoton dissociation (IRMPD) technique. The experimental results show that the spectra peaks for the photoproducts are y2/b6- and y7-type ions, corresponding to the cleavage of His-Pro and Asp-Arg in the parent amino acid sequence. The fragmentation of the peptide under collision-free vacuum conditions is modeled using molecular dynamics simulations (MD). The binding energy for the peptide bonds (C'-N bond) of Angiotensin II is estimated from ab initio calculations. The calculations are directed at predicting experimental measurements of the product ions from the photodissociation of the peptide. The product distributions simulated by the MD dissociation trajectories include predominantly y7/b1 and y2/b6 pair ions.     

Rhodium-catalyzed 1,4-addition of alkenylzirconocene chlorides to electron deficient alkenes

The 1,4-conjugated addition of alkenylzirconocene chloride complexes to α,β-enones, α,β-enoic acid esters, and α,β-enoic acid amides can be efficiently achieved by the use of [RhCl(cod)]₂ catalyst. A high diastereoselectivity (95% yield, 90% de) was obtained through the reaction of α,β-enoic acid amide derived from Oppolzer's sultam and 2-butenoyl chloride, while the use of Evans' chiral oxazolidinone as a chiral auxiliary in place of Oppolzer's sultam gave a poor diastereoselectivity (98% yield, 26% de).     

Pictet–Spengler Synthesis of Quinoline‐Fused Porphyrins and Phenanthroline‐Fused Diporphyrins

Doubly and quadruply quinoline‐fused porphyrins were effectively synthesized through a reaction sequence consisting of Suzuki–Miyaura coupling of β‐borylated porphyrins with 2‐iodoaniline and subsequent Pictet–Spengler cyclization. These quinoline‐fused porphyrins display red‐shifted absorption bands and higher electron‐accepting abilities. This synthetic protocol also allowed the synthesis of phenanthroline‐fused porphyrin dimers, which bound either a Ni^II or Zn^II cation. The resultant metal complexes displayed further red shifted absorption spectra and molecular twists to effect an almost perpendicular arrangement of the two porphyrins.     

Cationic polymerization of formaldehyde in liquid carbon dioxide. Part II: A kinetic study of the polymerization

The kinetic behavior on the polymerization of formaldehyde with and without acidic catalyst, in liquid carbon dioxide, in the temperature range of 30 to 50°C. was investigated. In the polymerization without catalyst both the polymer yield and the degree of polymerization increased with reaction time and also with rising temperature. With acidic catalyst, such as acetic acid and dichloroacetic acid, both the polymer yield and the degree of polymerization increased more than that in the polymerization without catalyst. The overall rate of polymerization with and without acidic catalyst was expressed by the first-order rate equation with respect to monomer concentration. From the results it was concluded that the polymerizations belonged to a type of successive polymerization with rapid initiation and no termination. The rate constant and the activation energy of each elementary process of polymerization were estimated on the basis of the results.