A novel measurement method of Donnan potential at an interface between a charged membrane and mixed salt solution

We developed a novel measurement method of the Donnan potential difference at a charged membrane/salt solution interface. The method can measure the potential under the condition that the membrane charge density is much lower than the KCl concentration of the salt bridge. This method is very useful for obtaining the effective charge density of each layer of a bipolar membrane. The present experiments in a system of a negatively charged poly(vinyl alcohol) membrane and a single salt solution of KCl, NaCl, LiCl, CaCl₂ and LaC₃ revealed that the membrane effective charged density has the same value for all the ions. The experiments in mixed KCl and CaCl₂ solution revealed that the potential in the system is governed mainly by the concentration of the counterion having the highest valence in the system.     

Sulfur nitride in organic chemistry. 9. The reaction of tetrasulfur tetranitride with benzyl ketones. Preparation of 3,4-disubstituted-1,2,5-thiadiazoles

The reaction of tetrasulfur tetranitride ( 1 ) with various aryl and alkyl benzyl ketones ( 2a-o ), oxindole ( 11 ), benzyl α-pyridyl ketone ( 12 ) and α-phenacylpyridine ( 13 ) afforded the corresponding 1,2,5-thiadiazoles ( 3a-n, 11 and 14 ). The scope and limitations of the above reaction were investigated and the evidences suggesting the radical anion mechanism are presented.     

Comments on the primary and scatter dose-spread kernels used for convolution methods

The basic primary and scatter dose-spread kernels used for convolution methods are usually produced by Monte Carlo simulations with the interaction point forced to the center of a large water phantom. However, it is still not clear whether such Monte Carlo based kernels allow accurate dose calculations with a wide range of field sizes and depths, especially in thorax phantoms. Using the differential primary and scatter concept, this paper proposes another type of basic kernel, with which perfectly accurate primary and scatter absorbed dose calculations can be performed under conditions that the beam is parallel, the incident beam intensity is uniform within and zero outside the field, and the primary beam attenuation coefficient along raylines is not a function of depth and off-axis distance.     

Synthesis, structure, and physical properties of 1,11-o-benzeno[2]orthocyclo[2](1,2)tropyliophane

The title compound (2) has been synthesized, the structure and the physical properties of which are investigated by X-ray, spectroscopic analyses, and MO calculations. There exists charge transfer (CT) interaction between the tropylium ion and the facing phenyl ring. From the pK_R⁺ value of 2, it can be clear that the cation 2 is stabilized by the CT interaction. In spite of the presence of bond weakening σ-π orbital mixing, the cation 2 withstands retro[4+4]type bond cleavage, which is quite interesting when compared to a facile cleavage for the congener with anthracene photodimer type structure.     

Polymerization of tetraallyl ammonium chloride

The radical polymerization of tetraallyl ammonium chloride (TAAC) was carried out in water using azo-initiator as compared to that of diallyl dimethyl ammonium chloride (DADMAC); the rate of polymerization was quite low for TAAC, around one-third of DADMAC. Kinetic discussion revealed the importance of degradative chain transfer in the polymerization of TAAC. The cyclopolymerizability of TAAC was estimated kinetically as the ability of 5-membered monocyclic radical to form a bicyclic ring, giving the cyclization constant of 21 mol/L at [M] = 2 mol/L. Gelation occurred at around 20% conversion.     

Heterogeneous structure of silk fibers from Bombyx mori resolved by 13C solid-state NMR spectroscopy

The molecular conformation of silk fibrion is characterized by solid-state 13C NMR before spinning (silk I structure) and after spinning (silk II structure). We compare native silk fibers with the quasi-crystalline Cp-fraction and a synthetic model peptide (Ala-Gly)15, both of which can be converted either into silk I by dialysis from 9 M LiBr or into silk II by treatment with formic acid. Our results demonstrate that silk II fibers are intrinsically heterogeneous, consisting of beta-sheets, distorted beta-turns, and distorted beta-sheets. This higher-order heterogeneity is revealed by the 13C-NMR Cbeta-peak of Ala, indicating that the Ala side chains are stacked partially in parallel and partially face-to-face, at a ratio of 1:2.     

Studies of the polymerization of diallyl compounds. XXVII. Copolymerization of diallyl tartrate with several vinyl monomers

The radical copolymerization of diallyl tartrate (DATa) (M₁) with diallyl succinate (DASu), diallyl phthalate (DAP), allyl benzoate (ABz), vinyl acetate (VAc), or styrene (St) was investigated in order to disclose in more detail the characteristic hydroxyl group's effect observed in the homopolymerization of DATa. In the copolymerization with DASu or DAP as a typical diallyldicarboxylate, the dependence of the rate of copolymerization on monomer composition was different for different copolymerization systems and unusual values larger than unity for the product of monomer reactivity ratios, r₁r₂, were obtained. In the copolymerization with ABz or VAc (M₂), the r₁ and r₂ values were estimated to be 1.50 and 0.64 for the DATa/ABz system and 0.76 and 2.34 for the DATa/VAc system, respectively; the product r₁r₂ for the latter copolymerization system was found again to be larger than unity. In the copolymerization with St, the largest effect due to DATa monomer of high polarity was observed. Solvent effects were tentatively examined to improve the copolymerizability of DATa. These results are discussed in terms of hydrogen-bonding ability of DATa.     

Hair analysis of nicotine and cotinine for evaluating tobacco smoke exposure by liquid chromatography-mass spectrometry

A simple liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) method for the determination of nicotine and cotinine in human hair was established. In the procedure, a hair sample (10 mg) was washed with dichloromethane and digested in 2.5 M sodium hydroxide. The digest was extracted with dichloromethane and then 25 mM hydrochloric acid in methanol was added to the extract, to prevent loss of analytes. The solution was evaporated and redissolved in the mobile phase, methanol/10 mM ammonium acetate (30/70, v/v). A 20 microL aliquot of redissolved solution was subjected to analysis. Nicotine and cotinine in human hair were quantified by using deuterated analytes as internal standards. The quantification limits were 8 microg/L for nicotine and 0.9 microg/L for cotinine. The proposed method was applied to measure the concentrations of nicotine and cotinine in hair of smokers and non-smokers to evaluate their self-reported smoking and exposure to environmental tobacco smoke. In both cases, the method provided good selectivity, accuracy and precision.     

Application of samarium diiodide (SmI2)-induced reduction of gamma-acetoxy-alpha,beta-enoates with alpha-specific kinetic electrophilic trapping for the synthesis of amino acid derivatives

Gamma-acetoxy-alpha,beta-enoates were easily reduced by samarium diiodide (SmI2) in THF to generate samarium dienolates which were kinetically trapped with ease at their alpha-positions by electrophiles (proton, aldehydes or ketones) to yield (E)-alkene dipeptide isosteres or gamma-amino acid derivatives in high chemical yields.     

SmI2-mediated reduction of gamma,gamma-difluoro-alpha,beta-enoates with application to the synthesis of functionalized (Z)-fluoroalkene-type dipeptide isosteres

A samarium diiodide (SmI(2))-mediated reduction of gamma,gamma-difluoro-alpha,beta-enoates (15, 29, and 34) was successfully applied to the synthesis of (Z)-fluoroalkene dipeptide isosteres (23, 30, and 35), which have served as potential dipeptide mimetics. Reduction of the gamma,gamma-difluoro-alpha,beta-enoates by SmI(2) proceeded via successive two-electron transfers to form dienolate species which upon kinetically controlled trapping with t-BuOH yielded Xaa-Gly-type fluoroalkene isosteres exemplified by 23, 30, and 35. Replacement of the t-BuOH kinetic trapping agent with aldehydes or ketones provided access to alpha-substituted fluoroalkene isosteres (43 and 45) through aldol reactions of Sm-dienolates with the carbonyl compounds. Of particular note, the use of the SmI(2)-HCHO reagent system with chiral enoate 34 provided D-Phe-psi[(Z)-CF[double bond]CH]-D/L-Ser isosteres (45), which could be converted to enantiomerically pure isosteres (49-52) that bore a variety of side chain functionalities at the alpha-position. This was achieved by a sequence of manipulations consisting of beta-lactone formation followed by chromatographic separation and ring-opening with soft nucleophiles. Included in the present work is the first utilization of a Rh-catalyzed Reformatsky reaction of chiral imines for the stereoselective preparation of alpha,alpha-difluoro-beta-amino acid derivatives (28 and 33). The appropriate choice of reagents (carbonyl compounds for kinetic trapping or ring-opening nucleophiles and imines for Reformatsky reactions) allows the presented methodology to yield various fluoroalkene isosteres possessing a wide range of side chain functionalities.