Diacetoxylation of conjugated dienes with thallium(III) acetate in acetic acid

The reaction of conjugated dienes such as 1,3-butadiene, isoprene, 2,3-dimethyl-1,3-butadiene, 2,5-dimethyl-2,4-hexadiene, 1,3-cyclopentadiene, and 1,3-cyclohexadiene, with thallium(III)acetate in acetic acid at 10–65° for 0.5–15 hr affords an isomeric mixture of the corresponding diacetoxyalkenes (1,2- and 1,4-addition products) in 10–92% yields. The 1,2-addition products are predominantly formed in all cases examined except the case of 1,3-cyclopentadiene. The reaction is assumed to proceed through acetoxythallation and dethallation steps, the latter step being accompanied and/or followed by an attack of acetoxyl group. An initial attack of thallium moiety is proposed to occur mainly at C-1 and C-2 carbons in the cases of linear terminal dienes and cyclic dienes, respectively.     

Tetrahedranyllithium: synthesis, characterization, and reactivity

The first representative of stable tetrahedranyl anion, tris(trimethylsilyl)tetrahedranyllithium (3), has been synthesized by the reaction of tetrakis(trimethylsilyl)tetrahedrane (2) with methyllithium in tetrahydrofuran. The structural characterization of the tetrahedranyllithium has been achieved by X-ray crystallography, showing that the structure of 3.(TMEDA)1.5 represents a stretched tetrahedron. The endocyclic C(Li)-C(SiMe3) bond lengths range from 1.5408(15) to 1.5441(15) A (av 1.5425(15) A), and are longer than the endocyclic C(SiMe3)-C(SiMe3) bond lengths, which range from 1.4961(15) to 1.5009(15) A (av 1.4986(15) A). Methyl- and hydrogen-substituted tetrahedranes have also been prepared by the reaction of 3 with dimethyl sulfate and cyclopentadiene, respectively.     

SEC–MALLS analysis of cellulose using LiCl/1,3-dimethyl-2-imidazolidinone as an eluent

The lithium chloride/1,3-dimethyl-2-imidazolidinone (LiCl/DMI) solvent system for cellulose was adopted as a mobile phase of size-exclusion chromatographic (SEC) analysis of cellulose, and the applicability of this system was examined using multi-angle laser light scattering and ¹³C-NMR analysis. The results indicate that 8% (w/v) LiCl/DMI ID a true solvent for cellulose, and that cellulose molecules dissolving ID 1% (w/v) LiCl/DMI are separated orderly depending on their molecular mass (MM) or root-mean-square (RMS) radius by the SEC system. Practically, no aggregates were detected ID the dilute cellulose/LiCl/DMI solutions. Furthermore, high stability of cellulose/LiCl/DMI solutions has been demonstrated; only a few percent of decline ID average MM was observed even after storage for 6 months at room temperature. Relationships between RMS radius and MM for hardwood bleached kraft pulp ID 1% LiCl/DMI was estimated as the following equation: _g^0.59, corresponding to a Mark–Houwink–Sakurada exponent of 0.77.     

A new Zn(II) coordination polymer with 4-pyridylthioacetate: assemblies of homo-chiral helices with sulfide sites

A coordination polymer [Zn(pyta)(OH)] (pyta = 4-pyridylthioacetate), was synthesized and structurally characterized; it is constructed by an alternating assembly of two types of homo-chiral helices, [Zn-OH] and [Zn-pyta], in which the sulfide moieties are fastened in the latter columns.     

Two-dimensional Monte Carlo simulations of a colloidal dispersion composed of polydisperse ferromagnetic particles in an applied magnetic field

We have investigated aggregation phenomena in a polydisperse colloidal dispersion of ferromagnetic particles simulated by employing the cluster-moving Monte Carlo method in an applied magnetic field. The influence of both particle-particle and particle-field interactions on the aggregate structures is analyzed in terms of a pair correlation function. The results obtained in this study are summarized as follows: Under a strong magnetic field, chainlike clusters are formed along the magnetic field direction, and they become thickly clustered with an increase in the strength of the external magnetic field. Moreover, the thickly clustered chains are formed for a polydisperse system that has a large standard deviation of particle diameters. In contrast, for a very weak magnetic field, the strong interaction between the larger particles gives rise to the formation of various shapes in the chainlike clusters, including bending, looping, and branching. With an increase in the external magnetic field, these structures reorganize to form straight chainlike clusters. Furthermore, the thickness of the chainlike clusters for the polydisperse system is found to depend on the standard deviation of the particle-size distribution but is found to be independent of the magnetic field strength.     

Plaunol A and B,new anti-ulcer diterpenelactones from Crotonsublyratus

Two new diterpenelactones named plaunol A ($\text{2}$) and B ($\text{3}$) exhibiting anti-Shay ulcer activity were isolated from Thai medicinal plant, $\text{Croton}$$\text{sublyratus}$. Structure of $\text{2}$ was determined by X-ray analysis of its $\text{p}$-bromobenzoate and structure of $\text{3}$ was deduced from the results of chemical correlation and the spectral data.     

Prediction of measurement precision of apparatus using a chemometric tool in electrochemical detection of high-performance liquid chromatography

The relative standard deviation (RSD) of measurements in high-performance liquid chromatography with electrochemical detection (HPLC-ECD) was predicted by a chemometric tool based on the 1/f fluctuation model which is made up of white noise and a Markov process, called the Function of Mutual Information (FUMI) theory. FUMI theory can provide aprecise and reliable detection limit from a single measurement of noise and signal in HPLC-ECD. To obtain RSD (n = 5) for determination of (-)-epicatechin at five concentrations required 12.5 h, while the predicted RSD by FUMI theory required only 0.5 h (one measurement). Moreover, to trace the source of instrumental noise, power spectra of chromatographic baseline were used. Selection of a suitable apparatus in HPLC-ECD system, acquisition of RSD, and detection limits for determination of catechins by HPLC-ECD were simply and easily made by this chemometric tool within a very short time. The use of the FUMI theory for the prediction of measuring precision was more efficient and the optimization was less time-consuming to be suited for determination.     

Ketene formation in benzdiyne chemistry: ring cleavage versus Wolff rearrangement

In the chemistry toward generating benzdiyne from five benzenetetracarboxylic dianhydride derivatives, ketene formation was exclusively observed in the photolysis of difluorobenzenetetracarboxylic dianhydride in a nitrogen matrix at 13 K. Two ketenes were formed concomitantly with difluorobenzdiyne. These ketenes were identified on the basis of good agreement between the observed and calculated (B3LYP/6-31G level) IR spectra. Neither ketene contained the five-membered-ring moiety as cyclopentadienylideneketene, which is formed by Wolff rearrangement in the benzyne chemistry. The first generated ketene was assigned to a ketene with a cyclopropene moiety, and the second, to a ketene with a butadiyne moiety. The first generated ketene was a major product in the photolysis and was formed by cleavage of the bond connecting the ketene group and the C-F carbon and not the bond connecting the ketene group and the carbene moiety. Thus the structures of these ketenes indicated that a unprecedented ring cleavage, rather than Wolff rearrangement, is the dominant process in the benzdiyne chemistry.     

Homoleptic cyclometalated iridium complexes with highly efficient red phosphorescence and application to organic light-emitting diode

Phosphorescence studies of a series of facial homoleptic cyclometalated iridium(III) complexes have been carried out. The complexes studied have the general structure Ir(III)(C-N)(3), where (C-N) is a monoanionic cyclometalating ligand: 2-(5-methylthiophen-2-yl)pyridinato, 2-(thiophen-2-yl)-5-trifluoromethylpyridinato, 2,5-di(thiophen-2-yl)pyridinato, 2,5-di(5-methylthiophen-2-yl)pyridinato, 2-(benzo[b]thiophen-2-yl)pyridinato, 2-(9,9-dimethyl-9H-fluoren-2-yl)pyridinato, 1-phenylisoquinolinato, 1-(thiophen-2-yl)isoquinolinato, or 1-(9,9-dimethyl-9H-fluoren-2-yl)isoquinolinato. Luminescence properties of all the complexes at 298 K in toluene are as follows: quantum yields of phosphorescence Phi(p) = 0.08-0.29, emission peaks lambda(max) = 558-652 nm, and emission lifetimes tau = 0.74-4.7 micros. Bathochromic shifts of the Ir(thpy)(3) family [the complexes with 2-(thiophen-2-yl)pyridine derivatives] are observed by introducing appropriate substituents, e.g., methyl, trifluoromethyl, or thiophen-2-yl. However, Phi(p) of the red emissive complexes (lambda(max) > 600 nm) becomes small, caused by a significant decrease of the radiative rate constant, k(r). In contrast, the complexes with the 1-arylisoquinoline ligands are found to have marked red shifts of lambda(max) and very high Phi(p) (0.19-0.26). These complexes are found to possess dominantly (3)MLCT (metal-to-ligand charge transfer) excited states and have k(r) values approximately 1 order of magnitude larger than those of the Ir(thpy)(3) family. An organic light-emitting diode (OLED) device that uses Ir(1-phenylisoquinolinato)(3) as a phosphorescent dopant produces very high efficiency (external quantum efficiency eta(ex) = 10.3% and power efficiency 8.0 lm/W at 100 cd/m(2)) and pure-red emission with 1931 CIE (Commission Internationale de L'Eclairage) chromaticity coordinates (x = 0.68, y = 0.32).