Cloud point extraction equilibrium of lanthanum(III), europium(III) and lutetium(III) using di(2-ethylhexyl)phosphoric acid and Triton X-100

The cloud point extraction behaviors of lanthanoids(III) (Ln(III) = La(III), Eu(III) and Lu(III)) with and without di(2-ethylhexyl)phosphoric acid (HDEHP) using Triton X-100 were investigated. It was suggested that the extraction of Ln(III) into the surfactant-rich phase without added chelating agent was caused by the impurities contained in Triton X-100. The extraction percentage more than 91% for all Ln(III) metals was obtained using 3.0 × 10⁻⁵ mol dm⁻³ HDEHP and 2.0% (v/v) Triton X-100. From the equilibrium analysis, it was clarified that Ln(III) was extracted as Ln(DEHP)₃ into the surfactant-rich phase. The extraction constant of Ln(III) with HDEHP and 2.0% (v/v) Triton X-100 were also obtained.     

Self-crosslinkable polymers. I. Copolymerization of glycidyl methacrylate with 2-vinylpyridine and 2-vinyl-5-ethylpyridine

A soluble and self-crosslinkable linear copolymer with pendant epoxy and pyridyl groups was obtained from glycidyl methacrylate (M₁) and 2-vinylpyridine (M₂) or 2-vinyl-5-ethylpyridine (M₂) by the action of azobisisobutyronitrile. The monomer reactivity ratios were determined in tetrahydrofuran at 60°C: r₁ = 0.510, r₂ = 0.620 with 2-vinylpyridine and r₁ = 0.57, r₂ = 0.62 with 2-vinyl-5-ethylpyridine. These were consistent with the calculated values with the reported Q and e values for these monomers. The intrinsic viscosities of the copolymers with 2-vinylpyridine and with 2-vinyl-5-ethylpyridine were found to be 0.17–0.19 and 0.26–0.38, respectively, in tetrahydrofuran at 30°C; they were independent of the copolymer composition. The copolymers were amorphous, had no clear melting points, and became insoluble crosslinked polymers under heating without further addition of any curing agents.     

Diacetoxylation of conjugated dienes with thallium(III) acetate in acetic acid

The reaction of conjugated dienes such as 1,3-butadiene, isoprene, 2,3-dimethyl-1,3-butadiene, 2,5-dimethyl-2,4-hexadiene, 1,3-cyclopentadiene, and 1,3-cyclohexadiene, with thallium(III)acetate in acetic acid at 10–65° for 0.5–15 hr affords an isomeric mixture of the corresponding diacetoxyalkenes (1,2- and 1,4-addition products) in 10–92% yields. The 1,2-addition products are predominantly formed in all cases examined except the case of 1,3-cyclopentadiene. The reaction is assumed to proceed through acetoxythallation and dethallation steps, the latter step being accompanied and/or followed by an attack of acetoxyl group. An initial attack of thallium moiety is proposed to occur mainly at C-1 and C-2 carbons in the cases of linear terminal dienes and cyclic dienes, respectively.     

Prediction of measurement precision of apparatus using a chemometric tool in electrochemical detection of high-performance liquid chromatography

The relative standard deviation (RSD) of measurements in high-performance liquid chromatography with electrochemical detection (HPLC-ECD) was predicted by a chemometric tool based on the 1/f fluctuation model which is made up of white noise and a Markov process, called the Function of Mutual Information (FUMI) theory. FUMI theory can provide aprecise and reliable detection limit from a single measurement of noise and signal in HPLC-ECD. To obtain RSD (n = 5) for determination of (-)-epicatechin at five concentrations required 12.5 h, while the predicted RSD by FUMI theory required only 0.5 h (one measurement). Moreover, to trace the source of instrumental noise, power spectra of chromatographic baseline were used. Selection of a suitable apparatus in HPLC-ECD system, acquisition of RSD, and detection limits for determination of catechins by HPLC-ECD were simply and easily made by this chemometric tool within a very short time. The use of the FUMI theory for the prediction of measuring precision was more efficient and the optimization was less time-consuming to be suited for determination.     

N,N-Diethyl-3-toluamide Formulation Based on Ethanol Containing 0.1% 2-Hydroxypropyl-β-cyclodextrin Attenuates the Drug’s Skin Penetration and Prolongs the Repellent Effect without Stickiness

N,N-diethyl-3-toluamide (DEET) is one of the most widely used insect repellents in the world. It was reported that a solution containing 6–30% cyclodextrin (CD) as a solvent instead of ethanol (EtOH) provided an enhancement of the repellent action time duration of the DEET formulation, although the high-dose CD caused stickiness. In order to overcome this shortcoming, we attempted to prepare a 10% DEET formulation using EtOH containing low-dose CDs (β-CD, 2-hydroxypropyl-β-CD (HPβCD), methyl-β-CD, and sulfobutylether-β-CD) as solvents (DEET/EtOH/CD formulations). We determined the CD concentration to be 0.1% in the DEET/EtOH/CD formulations, since the stickiness of 0.1% CDs was not felt (approximately 8 × 10⁻³ N). The DEET residue on the skin superficial layers was prolonged, and the drug penetration into the skin tissue was decreased by the addition of 0.1% CD. In particular, the retention time and attenuated penetration of DEET on the rat skin treated with the DEET/EtOH/HPβCD formulation was significantly higher in comparison with that of the DEET/EtOH formulation without CD. Moreover, the repellent effect of DEET was more sustained by the addition of 0.1% HPβCD in the study using Aedes albopictus. In conclusion, we found that the DEET/EtOH/HPβCD formulations reduced the skin penetration of DEET and prolonged the repellent action without stickiness.     

Surface viscous flattening kinetics of soda-lime silicate glass by sinusoidal profile decay method

The kinetics of the flattening of surface corrugations of float glasses were investigated in dry nitrogen at 610 to 670°C. The amplitude of the sinusoidal surface profile decayed exponentially with time while its wavelength remained constant. The dependence of decay rate on wavelength indicated that the process is controlled by the viscous flow. From the obtained rate constant the viscosity was calculated using the surface energy value determined independently by the zero-creep method. The viscosity thus obtained reflects the mass transport property in the vicinity of the glass surface. It was several times larger than that determined by the fibre elongation or intrusion method which should reflect the bulk properties. No difference in the decay rate was observed on both the surfaces of float glass of which only one side had been exposed to molten tin during the glass manufacturing process.     

Observation of spatial distribution of laser-induced refractive index change in dye-doped liquid crystals

Spatial distributions of photothermal refractive index changes in dye-doped liquid crystals were determined by an optical interferometric method. The refractive index change of the order of 10^-1, including spatial distribution, was estimated by the described experimental technique. The absolute value of the refractive index change was proportional to the pump beam power, and the diameter of the index distribution was slightly larger than that of the pump laser beam due to heat conduction.     

Synthetic Studies on Sialoglycoconjugates 22: Total Synthesis of Tumor-Associated Ganglioside,Sialyl Lewis X1

ABSTRACT

The first total synthesis of tumor-associated glycolipid antigen, sialyl Lewis X is described. Glycosylation of 2-(trimethylsilyl)ethyl O-(2-acetamido-4,6-O-benzylidene-2-deoxy-β-D-glucopyranosyl)-(1→3)-O-(2,4,6-tri-O-benzyl-β-D-galactopyranosyl)-(1→4)-2,3,6-tri-O-benzyl-β-D-glucopyranoside (1) with methyl 2,3,4-tri-O-benzyl-1-thio-β-L-fuco-pyranoside (4) gave the α-glycoside (5), which was converted by reductive ring-opening of the benzylidene acetal into the glycosyl acceptor (6). Dimethyl(methylthio)sulfonium triflate-promoted coupling of 6 with methyl O-(methyl 5-acetamido-4,7,8,9-tetra-O-acetyl-3,5-dideoxy-D-glycero-α-D-galacto-2-nonulopyranosylonate)-(2→3)-2,4,6-tri-O-benzoyl-1-thio-β-D-galactopyranoside (7) afforded the desired hexasaccharide 8 in good yield. Compound 8 was converted into the α-trichloroacetimidate 11, via reductive removal of the benzyl groups, O-acetylation, removal of the 2-(trimethylsilyl)ethyl group, and treatment with trichloroacetonitrile, which, on coupling with (2S, 3R, 4E)-2-azido-3-O-benzoyl-4-octa-decene-1,3-diol (12), gave the β-glycoside 13. Finally, 13 was transformed, via selective reduction of the azide group, condensation with octadecanoic acid, O-deacylation, and hydrolysis of the methyl ester group, into the title compound 16.     

Efficient decoherence-free entanglement distribution over lossy quantum channels

We propose and demonstrate a scheme for boosting the efficiency of entanglement distribution based on a decoherence-free subspace over lossy quantum channels. By using backward propagation of a coherent light, our scheme achieves an entanglement-sharing rate that is proportional to the transmittance T of the quantum channel in spite of encoding qubits in multipartite systems for the decoherence-free subspace. We experimentally show that highly entangled states, which can violate the Clauser-Horne-Shimony-Holt inequality, are distributed at a rate proportional to T.