Graphite–boron composite heater in a Kawai-type apparatus: the inhibitory effect of boron oxide and countermeasures

We have investigated the performance of a graphite–boron composite (GBC) with 3?wt % boron as a precursor for a boron-doped diamond heater in a Kawai-type apparatus at 15?GPa. We first tested a machinable cylinder of GBC sintered at 1000°C in Ar/H₂ gas (99:1 molar ratio). Boron oxide (B₂O₃) formed during sintering frequently hindered the GBC heater from stable operation at temperatures higher than 1400°C by producing melt throughout the heater together with oxide and/or silicates. We then rinsed the GBC heater in hydrochloric acid to remove B₂O₃. After rinsing, we succeeded in stably generating temperatures higher than 2000°C. We also improved a molding process of different-sized GBC tubes for convenient use and tested the molded GBC heater. It was free from the B₂O₃ problem. The electromotive force of the W/Re thermocouple was successfully monitored up to 2400°C.     

Reminiscence of 40-year research on nitrogen metabolism

This article summarizes my research over 40 years. The main theme of my work is nitrogen metabolism of amino acids, though later I focused on protein turnover in the cell. In the first years of my research work, I was busy dissecting the pathways involved in the metabolism of certain amino acids and their related enzymes. Then I became interested in the physiology and regulation of matabolism of these amino acids. For that, I used primary cultured hepatocytes, which contain many liver-specific enzymes. However, this play field was very rough around 1970 and hence I had to smooth them (differentiated) first. We discovered a specific growth factor (hepatocyte growth factor, HGF) in rat platelets. Exceptionally, I also worked on branched chain amino acids (valine, leucine and isoleucine). These amino acids are not efficiently metabolized in the liver, so I had to consider the physiology of extrahepatic tissues as well. Finally, I came across a huge protease complex, the proteasome. Whether these players, small amino acid metabolizing enzymes and the huge protease complex, danced well in harmony on my playground or not, I still do not know.     

A compact optical heterodyne interferometer by optical integration and its application

A compact high-resolution optical heterodyne interferometer combining a two-frequency light module and a minute optical system is described. The light module, which generates two independent frequencies of light, is fabricated by proton exchange method on LiNbO₃ substrate. We report an experiment evaluating measurement accuracy using a micro-displacement measurement system which incorporates this interferometer. Results of the experiment with a standard thickness sample show high thermal stability with maximum measurement error of 1.8 nm at a temperature from 19°C to 33°C. The system was used to measure the hysteresis of a piezoelectric element for displacements of several nm, thereby making it possible to analyze the system quantitatively in practice.     

Ultrasonic intensity microscopy for imaging of living cells

Ultrasound intensity microscopy was developed for in vivo imaging. This paper describes the preliminary results obtained using 300 MHz ultrasound intensity microscopy for in vitro characterization of cell cultures. The novelty of the approach lies in the fact that it allows remote, non-contact and disturbance-free imaging of cultured synovial cells and the changes in the cells’ properties due to external stimulants such as transforming growth factor beta-1 (TGF-β1). The intensity imaging method has potential for extracting mechanical cell properties and monitoring the effects of drugs.Ultrasound propagates through a thin specimen such as cultured cells and is reflected at the interface between the specimen and substrate. A two-dimensional distribution of the ultrasonic intensity, which is closely related to the mechanical properties, is visualized to analyze cell organs, such as the nucleus at the central part and the cytoskeleton at the peripheral zone. After stimulation with TGF-β1, the ultrasonic intensity at the actin zone was significantly increased compared with the control.     

Measurement of non-DLVO force on a silicon substrate coated with ammonium poly(acrylic acid) using scanning probe microscopy

The repulsive force originating from steric hindrance of polymers in aqueous solvent was investigated using scanning probe microscopy (SPM). The contact angle (CA) of ammonium poly(acrylic acid) (PAA) solution on the Si surface was measured to estimate the state of the Si substrate. Results of CA measurement show that the Si surface was fully covered with PAA at 0.1 mass% in aqueous solution. The interaction force between the Si tip and the wafer was estimated using the SPM force curve mode. The force curve measured in the ion-exchanged purified water showed the typical relation predicted by Derjaguin-Landau-Verway-Overbeek (DLVO) theory. However, the force curve shape in the 0.1 mass% PAA solution was significantly different. Only a repulsive force was observed at less than about 4 nm of separation distance between the Si wafer and cantilever tip. This distance originated from the steric repulsions of PAA adsorbed onto the Si wafer and cantilever tip.     

Effect of diamine treatment on the conversion efficiency of PbSe colloidal quantum dot solar cells

Polymer-free photovoltaic devices were fabricated via a solution process using PbSe colloidal quantum dots (QDs) and an organic semiconductor (tetrabenzoporphyrin, BP) that can be prepared in situ from a soluble precursor. The device structure was ITO/PEDOT/BP:QD/QD/Al, where the BP:QD and QD layers correspond to a bulk heterojunction and a buffer layer, respectively. The buffer layer was treated with ethylenediamine (EDA) to crosslink the QDs. As a result, the energy conversion efficiency of the EDA-treated device was superior to that of an untreated device, mainly due to an increase in the short-circuit current density.     

Color Zone Map in Peripheral Vision at Various Illuminance Levels

We measured the entire region of mesopic and photopic vision to determine the color zone covering the visual field with unique red, yellow, green, and blue hue components. Eight kinds of test stimuli in the natural color system (NCS) color notation system were used. These stimuli were presented at horizontal and vertical meridians, and at meridians inclined at 45° angles. The illuminance level was set at six levels: 0.01 lx-1000 lx. The evaluation method measured chromatic, white, and black components as well as the hue component of the stimuli. Results show that the color zone of the retina extended further into the periphery with increasing illuminance; the response of opponent colors y-b was shown to be greater than that of the opponent colors r-g.     

Status of heavy element research using a gas-filled recoil separator at RIKEN

A gas-filled type of recoil separator for heavy element research was installed at an experimental hall of RIKEN Linear Accelerator facility to realize getting higher intensity of primary beam and long beam time. Performance of the separator was studied using target recoils and various nuclear reactions. The results show the high performance of the separator for heave element research. As an application of the GARIS, production and identification of an isotope of the 110th element ²⁷¹[110] have been performed using the ²⁰⁸Pb(⁶⁴Ni,1n)²⁷¹[110] reaction. Three decay chains coincide well both in decay times and energies with the ones reported by the group of SHIP experiment at GSI, Germany. Our results provide a confirmation of the synthesis of an isotope ²⁷¹[110] of element 110.     

An MRA study of vascular stenosis in a pig model using CH3-DTPA-Gd (NMS60) and Gd-DTPA

PURPOSE: This study used an experimental arterial stenosis model in pigs to evaluate the utility of a new medium-weight MRI contrast agent, NMS60 (a synthetic oligomeric Gd complex containing three Gd(3+) atoms, molecular weight of 2158 Da) compared to Gd-DTPA for contrast-enhanced MRA. MATERIALS AND METHODS: We used six male white hybrid pigs. Under anesthesia, one femoral artery was exposed and an inflatable cuff placed around it. The cuff was tightened around the vessel until 80-90% stenosis was achieved using digital subtraction angiography as a guide. Animals were then immediately transferred to the MRI scanner and images acquired pre- and postcontrast injection (0.1 or 0.2 mmol Gd/kg Gd-DTPA or NMS60, as a rapid bolus) using high-resolution and dynamic MRA. RESULTS: The dynamic MRA scans acquired during contrast bolus injection clearly showed the stenosed femoral artery as a segment of close to zero enhancement during the arterial phase of the bolus transit, while on the high-resolution scans the stenosis was difficult to detect due to venous signal contamination. The signal-to-noise at peak enhancement on the dynamic scans was significantly greater with 0.1 mmol Gd/kg NMS60 compared to 0.1 mmol Gd/kg Gd-DTPA (14.6 vs. 9.9, P < .05) and not significantly greater than 0.2 mmol Gd/kg (14.6 vs. 12.8). DISCUSSION AND CONCLUSION: This new medium-weight contrast agent demonstrated significantly greater enhancement than Gd-DTPA and may be valuable to aid detection of vascular stenosis in humans.     

Growth of a third ferromagnetic solid 3He layer on graphite

We have measured the nuclear susceptibility of 3He in Grafoil filled with pure liquid 3He over the pressure region between 0.6 and 31.38 bars and at temperatures down to 0.5 mK with a cw NMR method. The nuclear magnetization corresponding to the adsorbed 3He layers on the Grafoil surface shows a strong ferromagnetic tendency with a periodic behavior as a function of liquid pressure. This observation is attributable to the growth of third and fourth solid 3He layers with the liquid pressure increase. The pressure dependence of the Weiss temperature indicates the third layer is completed at 19 bars and the fourth probably at 28 bars. The number of localized spins estimated from the solid magnetization is almost doubled from 0 to 28 bars, being consistent with this scenario.