Prediction of measurement precision of apparatus using a chemometric tool in electrochemical detection of high-performance liquid chromatography

The relative standard deviation (RSD) of measurements in high-performance liquid chromatography with electrochemical detection (HPLC-ECD) was predicted by a chemometric tool based on the 1/f fluctuation model which is made up of white noise and a Markov process, called the Function of Mutual Information (FUMI) theory. FUMI theory can provide aprecise and reliable detection limit from a single measurement of noise and signal in HPLC-ECD. To obtain RSD (n = 5) for determination of (-)-epicatechin at five concentrations required 12.5 h, while the predicted RSD by FUMI theory required only 0.5 h (one measurement). Moreover, to trace the source of instrumental noise, power spectra of chromatographic baseline were used. Selection of a suitable apparatus in HPLC-ECD system, acquisition of RSD, and detection limits for determination of catechins by HPLC-ECD were simply and easily made by this chemometric tool within a very short time. The use of the FUMI theory for the prediction of measuring precision was more efficient and the optimization was less time-consuming to be suited for determination.     

An analysis of the through-bond interaction using the localized molecular orbitals—IV: Long-range proton hyperfine coupling in exo- and endo-hydrogens in bicyclo[2.1.1]hex-5-yl radical

The INDO calculations were performed on bicyclo[2.1.1]hex-5-yl radical. From these calculations, it was confirmed that the hyperfine coupling constants depend largely on the geometry of the α hydrogen. The localized MO's were obtained from the canonical MO's calculated by using the INDO method. With the use of the localized MO's thus obtained, the variation in the hyperfine coupling constants at the 6exo- and 6endo-protons in this radical was explained in terms of the through-bond and/or the through-space interactions according to the procedure which we proposed previously. That is by the procedure we can selectively pick up a particular interaction between the specified localized MO's. The hyperfine coupling constant in this radical can be expressed by the summation of several interaction terms. The difference in the hyperfine spin coupling constants of the H_6exo and H_6endo in the radical now concerned has been attempted to explain using MO coefficients of the occupied orbitals.     

Effect of amount of monomer on radiation-induced polymerization of styrene adsorbed on silica gel

The effect of amount of monomer on radiation-induced polymerization of styrene adsorbed on silica gel was investigated with the monomer amounting from less than monolayer adsorption to more than the equilibrium adsorption. The rate of graft polymerization and the molecular weight of the polymer changed with the amount of monomer adsorbed on silica gel. Maximum grafting efficiency was obtained at monolayer adsorption. The molecular weight of graft polymer was higher than that of homopolymer in both radical and cationic polymerizations, and the ratio in molecular weight of graft polymer to that of homopolymer tends to be unity with increasing amount of adsorbed monomer. These results can mainly be explained in terms of the number of initiating species (radical and cation) that change in relation to the amount of adsorbed monomer. Propagation and termination change with amount of adsorbed monomer in relation to the molecular mobility of adsorbed monomer. A very high-molecular-weight graft polymer is formed only with a small amount of adsorbed monomer in the initial stage. The grafting percent with a large amount of adsorbed monomer increased after most of the monomer has been polymerized. Secondary effect of radiation on the graft and homopolymers due to energy transfer from silica gel is suggested from the complicated phenomena in the later stage of the reaction.     

Magnetic circular dichroism of theA andB bands in KI:Ga+, KI:In+, and KI:Sn2+

Magnetic circular dichroism (MCD) of theA- andB-absorption band region has been obtained at 4.2 K and 50 kG in KI:Ga⁺, KI:In⁺, and KI:Sn²⁺. The MCD spectra indicate the complex nature of these bands more clearly than the absorption spectra themselves do. TheA-band MCD consists in all cases of a positive and a negative part reflecting the structure of the absorption band. TheB-band MCD shows three peaks, two positive peaks at 4.34 and 4.41₅ eV (4.09 and 4.17₅ eV) and a negative peak at 4.38 eV (4.12₅ eV) in KI:Ga⁺ (KI:In⁺). TheB-band in KI:Sn²⁺ consists of a shoulder (b ₀) at 3.76 eV and a main band which has at least 5 sub-peaks (b ₁~b ₅) at 3.82₁, 3.84₁, 3.86₁, 3.88₀, and 3.89₅ eV; each of the subpeaks (b ₁~b ₅) gives a derivative-like MCD.The MCD shape functionf() for the transitiona _1g ² a _1g t _1u has been obtained for one set of parameter values by using the classical Franck-Condon approximation and the Monte Carlo integration method. The result can explain the observed salient features of theB- as well asA-band MCD's, indicating the validity of the Franck-Condon approximation and the interaction mode coordinates.     

N,N-Diethyl-3-toluamide Formulation Based on Ethanol Containing 0.1% 2-Hydroxypropyl-β-cyclodextrin Attenuates the Drug’s Skin Penetration and Prolongs the Repellent Effect without Stickiness

N,N-diethyl-3-toluamide (DEET) is one of the most widely used insect repellents in the world. It was reported that a solution containing 6–30% cyclodextrin (CD) as a solvent instead of ethanol (EtOH) provided an enhancement of the repellent action time duration of the DEET formulation, although the high-dose CD caused stickiness. In order to overcome this shortcoming, we attempted to prepare a 10% DEET formulation using EtOH containing low-dose CDs (β-CD, 2-hydroxypropyl-β-CD (HPβCD), methyl-β-CD, and sulfobutylether-β-CD) as solvents (DEET/EtOH/CD formulations). We determined the CD concentration to be 0.1% in the DEET/EtOH/CD formulations, since the stickiness of 0.1% CDs was not felt (approximately 8 × 10⁻³ N). The DEET residue on the skin superficial layers was prolonged, and the drug penetration into the skin tissue was decreased by the addition of 0.1% CD. In particular, the retention time and attenuated penetration of DEET on the rat skin treated with the DEET/EtOH/HPβCD formulation was significantly higher in comparison with that of the DEET/EtOH formulation without CD. Moreover, the repellent effect of DEET was more sustained by the addition of 0.1% HPβCD in the study using Aedes albopictus. In conclusion, we found that the DEET/EtOH/HPβCD formulations reduced the skin penetration of DEET and prolonged the repellent action without stickiness.     

Surface viscous flattening kinetics of soda-lime silicate glass by sinusoidal profile decay method

The kinetics of the flattening of surface corrugations of float glasses were investigated in dry nitrogen at 610 to 670°C. The amplitude of the sinusoidal surface profile decayed exponentially with time while its wavelength remained constant. The dependence of decay rate on wavelength indicated that the process is controlled by the viscous flow. From the obtained rate constant the viscosity was calculated using the surface energy value determined independently by the zero-creep method. The viscosity thus obtained reflects the mass transport property in the vicinity of the glass surface. It was several times larger than that determined by the fibre elongation or intrusion method which should reflect the bulk properties. No difference in the decay rate was observed on both the surfaces of float glass of which only one side had been exposed to molten tin during the glass manufacturing process.     

Fraunhofer Diffraction Pattern by a Slit Aperture between a Knife Edge and a Metal Cylinder

The Fraunhofer diffraction pattern of an aperture formed between a knife edge and a smooth surface of a turned metal cylinder or half cylinder is different from the diffraction pattern of an ideal slit aperture. The diffraction pattern is simulated by adding the light reflected by the cylinder surface to the pattern formed by a slit, and is measured using a cylinder that has been partly cut away so that it can represent either a full or half cylinder. The theoretical and measured patterns agree well with each other.     

Synthetic Studies on Sialoglycoconjugates 22: Total Synthesis of Tumor-Associated Ganglioside,Sialyl Lewis X1

ABSTRACT

The first total synthesis of tumor-associated glycolipid antigen, sialyl Lewis X is described. Glycosylation of 2-(trimethylsilyl)ethyl O-(2-acetamido-4,6-O-benzylidene-2-deoxy-β-D-glucopyranosyl)-(1→3)-O-(2,4,6-tri-O-benzyl-β-D-galactopyranosyl)-(1→4)-2,3,6-tri-O-benzyl-β-D-glucopyranoside (1) with methyl 2,3,4-tri-O-benzyl-1-thio-β-L-fuco-pyranoside (4) gave the α-glycoside (5), which was converted by reductive ring-opening of the benzylidene acetal into the glycosyl acceptor (6). Dimethyl(methylthio)sulfonium triflate-promoted coupling of 6 with methyl O-(methyl 5-acetamido-4,7,8,9-tetra-O-acetyl-3,5-dideoxy-D-glycero-α-D-galacto-2-nonulopyranosylonate)-(2→3)-2,4,6-tri-O-benzoyl-1-thio-β-D-galactopyranoside (7) afforded the desired hexasaccharide 8 in good yield. Compound 8 was converted into the α-trichloroacetimidate 11, via reductive removal of the benzyl groups, O-acetylation, removal of the 2-(trimethylsilyl)ethyl group, and treatment with trichloroacetonitrile, which, on coupling with (2S, 3R, 4E)-2-azido-3-O-benzoyl-4-octa-decene-1,3-diol (12), gave the β-glycoside 13. Finally, 13 was transformed, via selective reduction of the azide group, condensation with octadecanoic acid, O-deacylation, and hydrolysis of the methyl ester group, into the title compound 16.     

Oligosaccharide-Carrying Styrene-Type Macromers. Polymerization and Specific Interactions Between the Polymers and Liver Cells

Polystyrene derivatives with lactose, glucose, maltose, maltotriose, maltopentaose, and maltoheptaose on each benzene ring were prepared by the radical polymerization of a new class of macromers synthesized by coupling the corresponding oligosaccharide lactones with p-vinylbenzylamine. These polymers consisting of amphiphilic structural units were water-soluble, and organic solutes were bound to hydrophobic microenvironments of the polymers in water. α-D-Glucopyranose-carrying polymers were recognized and precipitated by concanavalin A. Cultivation of liver cells (hepatocytes) was attempted using culture dishes whose surface was coated with lactose-, glucose-, maltose-, and maltotriose-carrying polystyrenes. It has been found that a lactose-carrying polystyrene (PVLA) is a useful surface material for hepatocyte culture. 1) Highly specific adhesion of hepatocytes was attained for PVLA-coated dishes with or without serum supplement. 2) The cell adhesion was a threshold phenomenon with respect to the PVLA concentration on the dish. 3) The cell adhesion was effectively inhibited when hepatocytes were treated with PVLA molecules in the medium prior to culture. 4) The adhesion was not inhibited by albumin, an adhesion-inhibitory protein in serum. These findings suggest that pendent galactose residues of a PLVA molecule functioned as a strong recognition determinant for hepatocytes. We assume that multi-antennary, high-density galactose residues of PVLA are attributed to the specific adhesion of hepatocytes.     

Functions of Acyclic Poly(ethylene Oxide) Homologs: Acceleration of Nucleophilic Reactions and Selective Ion Transport through Membranes

The acceleration effect of poly(ethylene oxide) on nucleophilic reactions was investigated. The enhancement of the reaction rate was interpreted by the cooperative solvation of alkali metal ions with ethereal oxygens of PEO resulting in active nucleophilic anions. In relation to the complex formation of alkali metal ions with PEO, the oligo(ethylene oxide) derivatives were prepared as the synthetic ionophores, which were able to transport alkali metal ions selectively through a liquid membrane against the alkali metal ion concentration.