Rh(I)-catalyzed intramolecular hetero-[4+2] cycloaddition of ω-alkynyl-vinyl oximes

Cationic rhodium(I) catalyst derived from [RhCl(cod)]₂ and AgSbF₆ in hexafluoroisopropanol (HFIP) efficiently catalyzed the formation of bicyclic pyridine derivatives by intramolecular hetero-[4+2] cycloadditions of ω-alkynyl-vinyl oximes.     

Density functional theory investigation of Eu(III) complexes with beta-diketonates and phosphine oxides: model complexes of fluorescence compounds for ultraviolet LED devices

The density functional theory was employed to investigate Eu(III) complexes with three beta-diketonates and two phosphine oxides (complex M1: Eu(bdk)3(TPPO)2, complex M2: Eu(bdk)3(TMPO)2, and complex M3: Eu(bdk)3(TPPO)(TMPO)) deemed to be the model complexes of the fluorescence compounds for the ultraviolet LED devices we have recently developed. For each complex, two minimum energy points corresponding to two different optimized geometries (structures A and B) have been found, and the difference of the energy between two minimum energy points is found to be quite small (less than 1 kcal/mol). Vertical excitation energies and oscillator strengths for each complex at two optimized geometries have been obtained by the time-dependent density functional theory, and the character of the excited states has been investigated. For complex M3, the absorption edge is red-shifted, and the oscillator strengths are relatively large. The efficiency of intersystem crossing and energy transfer from the triplet excited state to the Eu(III) ion is considered by calculating DeltaE(ISC) (the energy difference between the first singlet excited state and the first triplet excited state) and DeltaE(ET) (the difference between the excitation energy of the complex for the first triplet excited state and the emission energy of the Eu(III) ion for 5D to 7F).     

Efficient direct electron transfer with enzyme on a nanostructured carbon film fabricated with a maskless top-down UV/ozone process

We have developed a new carbon film electrode material with thornlike surface nanostructures to realize efficient direct electron transfer (DET) with enzymes, which is very important for various enzyme biosensors and for anodes or cathodes used in biofuel cells. The nanostructures were fabricated using UV/ozone treatment without a mask, and the obtained nanostructures were typically 2-3.5 nm high as confirmed by atomic force microscopy measurements. X-ray photoelectron spectroscopy and transmission electron microscopy revealed that these nanostructures could be formed by employing significantly different etching rates depending on nanometer-order differences in the local sp(3) content of the nanocarbon film, which we fabricated with the electron cyclotron resonance sputtering method. These structures could not be realized using other carbon films such as boron-doped diamond, glassy carbon, pyrolyzed polymers based on spin-coated polyimide or vacuum-deposited phthalocyanine films, or diamond-like carbon films because those carbon films have relatively homogeneous structures or micrometer-order crystalline structures. With physically adsorbed bilirubin oxidase on the nanostructured carbon surface, the DET catalytic current amplification was 30 times greater than that obtained with the original carbon film with a flat surface. This efficient DET of an enzyme could not be achieved by changing the hydrophilicity of the flat carbon surface, suggesting that DET was accelerated by the formation of nanostructures with a hydrophilic surface. Efficient DET was also observed using cytochrome c.     

Synthesis of Star-Shaped Polymers via Coordination of Bipyridyl-Terminated Polyoxyethylene with Metal Ions

Abstract

This paper describes the synthesis of various star-shaped polymers by means of complexation of bipyridyl-terminated polyoxyethylene with Ru(II) ion. Three kinds of bipyridyl-terminated polyoxyethylenes of different molecular weights were prepared from the corresponding polyoxyethylene monomethyl ethers with narrow molecular weight distributions. Bipyridyl was found to be introduced quantitatively at the end of the polymers based on the results of UV spectra. The formation of a star-shaped polymer was carried out by the reaction of RuCl₃ with three equivalents of bipyridyl-terminated polyoxyethylene. The UV spectrum of the star-shaped polymer obtained supported the formation of a typical Ru(II) tris(bipyridyl) complex. From the results of GPC, the star-shaped polymer obtained had a higher molecular weight than the pre-polymer and showed a narrow molecular weight distribution. In the case of a Ni(II) or a Co(II) complex, however, the star-shaped polymer was found to be dissociated into three linear prepolymers under the conditions of GPC measurement.     

Synthesis of Substituted Phenyl Esters of Amino Acids and Polycondensation in Langmuirblodgett Films

Long-alkyl-chain phenyl esters of β-alanine, glycine, and L-valine were prepared, and their monolayer properties were correlated with their molecular structures. These compounds formed stable monolayers on acidic subphases. In particular, the p-hexadecylphenyl esters of β-alanine and glycine were remarkably stable, and their monolayers could be deposited on calcium fluoride plates as Y-type film by Blodgett's technique. The polycondensation of multilayers under an atmosphere saturated with triethylamine was investigated by changes in the IR spectra. It was determined that the polycondensation proceeded by a first-order reaction mechanism in the initial stage and that the rate in multilayers was faster than that in the bulk crystalline powder. These results suggest that the polycondensation is accelerated by a regular arrangement of the monomer in the multilayers, where the active sites are concentrated and located better for the polycondensation. In the case of the polycondensation in multilayers of the glycine ester, two kinds of condensation proceeded to afford poly(glycine) and 2,5-piperazinedione.     

Appearance of pure fluorocarbon micelles surveyed by fluorescence quenching of amphiphilic quinoline derivatives in fluorocarbon and hydrocarbon surfactant mixtures

A halide-sensitive fluorescence probe was utilized to evaluate the miscibility of fluorocarbon and hydrocarbon surfactants in aqueous micellar systems. The fluorescence of 6-methoxy-N-1,1,2,2-tetrahydroheptadecafluorodecylquinolinium chloride, FC10MQ, was quenched by halide ions dissociated from the surfactant. The fluorescence in micellar solutions showed an initially rapid decay. This suggests that halide ions effectively quench FC10MQ fluorescence at the micellar surface. The subsequent slow decay corresponds to the quenching of FC10MQ fluorescence in the aqueous bulk phase by the free counterions. The Stern-Volmer plots for fluorescence quenching gave a distinct break at the critical micelle concentration of the cationic surfactants. The abrupt increase in fluorescence quenching is attributed to the solubilization of the probe in the micelles. The fluorescence quenching behavior provides direct information about the immiscibility of fluorocarbon and hydrocarbon species in micelles, and the results indicate that almost pure fluorocarbon micelles appear in surfactants mixtures.     

Uniaxial alignment of the smallest diamagnetic susceptibility axis using time-dependent magnetic fields

A diamagnetic particle with magnetic susceptibilities chi3 < chi2 = chi1 < 0 was subjected to a rotating magnetic field to obtain an alignment of the chi3 axis (the smallest susceptibility axis) in the direction perpendicular to the plane of the rotating magnetic field. A polymer short fiber, whose fiber axis coincides with the chi3 axis, was suspended in a fluid with the same density, and then a rotating magnetic field generated by a rotation of a pair of permanent magnets was applied. The fiber axis, rotating following the applied field, finally ended up with an alignment perpendicular to the plane of the rotating magnetic field. The experimental data on the time course of the alignment was in good agreement with the numerical calculation based on the equation of rotation.     

Synthesis and characterization of flavylium salts having three types color depending on recrystallization conditions

Three types of flavylium salts (FVs, yellow, green and red) have been synthesized and the colors depended on recrystallization conditions. The existence of these color states was confirmed by diffuse reflectance spectra. The spectra were almost the same as the absorption spectra in ethanol solution. The molecular state of FVs in crystals will be the same as that in solutions. The crystal colors of the FVs are controlled by the recrystallization conditions.     

Profiling and comprehensive expression analysis of ABC transporter solute-binding proteins of Bacillus subtilis membrane based on a proteomic approach

We analyzed ABC transporter solute-binding proteins (SBPs) of the Bacillus subtilis membrane using a proteomic approach. We prepared a washed cell membrane fraction that was insoluble in 134 mM nondetergent sulfobetaine and then extracted proteins using mixtures of detergents in a stepwise manner. The membrane proteins were resolved by three two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) or two one-dimensional (1-D) PAGE procedures, electroblotted, and digested in the presence of 5% or 80% acetonitrile. Thereafter, matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF MS) identified 637 proteins corresponding to 15.9% of the total cellular proteins. We predicted that among these, 256 were membrane proteins, 101 were lipoproteins or secretory proteins and 280 were soluble proteins containing peripheral proteins that function in both the cytoplasm and the cell membrane such as SecA and FtsY. Among the 637 proteins, we identified 30 SBPs among 38 importers predicted by a bioinformatic search of the genome. We confirmed expression of the genes for the 30 SBPs using DNA microarray analysis. We compared the 2-D gel separation profiles of submembrane fractions solubilized by 1% n-dodecyl-beta-D-maltoside from cells cultured on Luria Bertani (LB), S7, and S7 medium without glutamate as well as DNA microarray data on LB and S7. The results suggested that YcdH, YtmK and YurO are binding proteins for Mn(++), glutamate and glucose, respectively, and that YqiX and YxeM are binding proteins for amino acids (tryptophan in S7 medium).