Rapid and high-resolution analysis of geometric polyprenol homologues by connected octadecylsilylated monolithic silica columns in high-performance liquid chromatography

A Chromolith Performance octadecylsilyl (ODS) monolithic silica column (Merck) was compared with a conventional microparticulate ODS-bonded silica column in the high-performance liquid chromatography separation of natural polyprenols. A system comprising two connected monolithic columns afforded an equivalent separation at half the analysis time of the conventional method. Furthermore, ten connected columns achieved a tremendously high-resolution separation, in which the complicated series of homologous polyprenols with geometric isomerism were fully separated.     

Mechanical and dielectric studies of carrageenan sols and gels

The temperature dependence of the dynamic shear modulus, strain optical coefficient, DC conductivity, and complex dielectric spectrum of κ- and ι-carrageenan aqueous solutions with K, Ca, Cs, and Na were measured in order to clarify the formation process of the cross-linking region and the gel network structure. From the correlation analysis between the shear modulus and the strain optical coefficient, we found that the stress inducing unit orientation increases with decreasing temperature, which strongly suggests that the branching number in a cross-linking region increases with decreasing temperature, which depends on counterion species. In terms of the correlation parameters, an increasing scheme of the branching number depends on counterion species. Just below the coil-helix transition temperature, dielectric relaxation arises, with relaxation time ∼100μs and relaxation strength ∼10³. Dielectric relaxation can be assigned to the counterion fluctuation in the parallel direction to the helical axis. The fluctuation distance of the counterion estimated from the relaxation time increases sharply in the initial stage of gelation and gradually reaches a constant value. We concluded that the longitudinal length of the aggregated region increases sharply at the initial state of gelation while the number of helical molecules bundled in a cross-linking region increases successively with decreasing temperature.     

Appearance of pure fluorocarbon micelles surveyed by fluorescence quenching of amphiphilic quinoline derivatives in fluorocarbon and hydrocarbon surfactant mixtures

A halide-sensitive fluorescence probe was utilized to evaluate the miscibility of fluorocarbon and hydrocarbon surfactants in aqueous micellar systems. The fluorescence of 6-methoxy-N-1,1,2,2-tetrahydroheptadecafluorodecylquinolinium chloride, FC10MQ, was quenched by halide ions dissociated from the surfactant. The fluorescence in micellar solutions showed an initially rapid decay. This suggests that halide ions effectively quench FC10MQ fluorescence at the micellar surface. The subsequent slow decay corresponds to the quenching of FC10MQ fluorescence in the aqueous bulk phase by the free counterions. The Stern-Volmer plots for fluorescence quenching gave a distinct break at the critical micelle concentration of the cationic surfactants. The abrupt increase in fluorescence quenching is attributed to the solubilization of the probe in the micelles. The fluorescence quenching behavior provides direct information about the immiscibility of fluorocarbon and hydrocarbon species in micelles, and the results indicate that almost pure fluorocarbon micelles appear in surfactants mixtures.     

Water-swellable polyelectrolyte microgels polymerized in an inverse microemulsion using a nonionic surfactant

A series of poly(dimethylacrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic acid) microgels slightly crosslinked by methylene-bis-acrylamide (MBA) were polymerized in a novel inverse microemulsion polymerization (IMEP) system. To determine a suitable composition of the IMEP system, the phase diagram of a pseudoternary system was made. The pseudoternary polymerization system consisted of n-hexane, a nonionic surfactant (polyoxyethylene oleyl ether, C18En), and an aqueous monomer solution. Polymerization was performed in a single-phase reversed micelle solution. The reversed micelles were about 50 nm in diameter, as determined by FF-TEM. The viscometric characteristics of the polymers extracted from the IMEP system were studied in 3 mM sodium chloride aqueous solution. The intrinsic viscosity values for the noncrosslinked and crosslinked (0.1 mol% MBA was incorporated) samples were 25 and 7.4 dl/g, respectively. The overlap concentration (c*) of crosslinked polymer microgel occurred at c[eta] = 1 in the solvent. When the volume fraction (phi) of the microgel was 0.7, the value of the apparent yield stress of the microgel solution was observed. These results show that the microgel has a significant thickening effect above c* due to friction between the microgel particles. It is assumed that the microgels polymerized in a confined space retain the shape or size of the nanosized reactor with a diameter on the order of 50 nm.     

In situ organogelation at room temperature: direct synthesis of gelators in organic solvents

Organogels are formed through a conventional organogelation involving a heating process and an in situ organogelation at room temperature. The conventional organogelation is carried out by dissolution of gelators by heating, while the in situ organogelation is performed by mixing of highly reactive methyl 2,6-diisocyanatohexanoate (LDI) or 2-isocyanatoethyl 2,6-diisocyanatohexanoate (LTI) and alkylamines. The in situ organogelation produced the organogels within several seconds after mixing. The organogels prepared by the in situ organogelation showed quite similar FT-IR spectra and SEM photographs to those formed by conventional organogelation. Moreover, the in situ organogelation using LTI and octylamine as well as dodecylamine produced organogels of acetone, ethyl acetate, and acetonitrile that gelators 5 and 6 cannot gel through conventional organogelation.     

Synthesis, structure, and dynamics of six-membered metallacoronands and metallodendrimers of iron and indium

In the reaction of the N-substituted diethanolamines (H(2)L(1-3)) (1-3) with calcium hydride followed by addition of iron(III) or indium(III) chloride, the iron wheels [Fe(6)Cl(6)(L(1))(6)] (4) and [Fe(6)Cl(6)(L(2))(6)] (6) or indium wheels [In(6)Cl(6)(L(1))(6)] (5), [In(6)Cl(6)(L(2))(6)] (8) and [In(6)Cl(6)(L(3))(6)] (9) were formed in excellent yields. Exchange of the chloride ions of 6 by thiocyanate ions afforded [Fe(6)(SCN)(6)(L(2))(6)] (7). Whereas the structures of 4, 5 and 7 were determined unequivocally by single-crystal X-ray analyses, complexes 8 and 9 were characterised by NMR spectroscopy. Contrary to what is normally presumed, the scaffolds of six-membered metallic wheels are not generally rigid, but rather undergo nondissociative topomerisation processes. This was shown by variable temperature (VT) (1)H NMR spectroscopy for the indium wheel [In(6)Cl(6)(L(1))(6)] (5) and is highlighted for the enantiotopomerisation of one indium centre [ 1/6[S(6)-5]<==>[1/6[S(6)-5']]. The self-assembly of metallic wheels, starting from diethanolamine dendrons, is an efficient strategy for the convergent synthesis of metallodendrimers.     

Development of a novel analytical method for determination of chondroitin sulfate using an in-capillary enzyme reaction

A novel analytical method for determination of total amount of chondroitin sulfate (CS) based on its conversion to desulfated chondro-disaccharide via an enzyme-catalyzed reaction, was developed. Using the in-capillary enzyme reaction, the method was also applied to the successful construction of an on-line analytical system. Within this system, electrophoretic migration was used to mix zones containing the enzyme mixture (chondroitinase ABC, chondro-4-sulfatase, chondro-6-sulfatase and 2-o-sulfatase) and the substrate (CS). The reaction was then allowed to proceed in the presence of a weak electric field and, finally, the product (desulfated chondro-disaccharide) of enzyme reaction migrated to the detector under the influence of an applied electric field. A polyvinyl alcohol-coated capillary was used to reduce protein adsorption. Desulfated chondro-disaccharide was successfully migrated toward the anode in 10 mM Tris-acetate buffer (pH 7.0) under reversed polarity and detected at 232 nm. The established method was validated and demonstrated to be applicable in the determination of total amount of CS in a commercial ophthalmic solution. No interference from the formulation excipients was observed. Good linearity was obtained, with correlation coefficients above 0.999. Recoveries and precisions ranged from 100.0 to 100.5%, and from 0.2 to 0.6% of the relative standard deviation, respectively. Good agreement was obtained between the established method and traditional photometric method based on carbazole reaction. In this study, application of the method to disaccharide compositional analysis was also performed.     

Structural Elucidation of an Elicitor-Active Oligosaccharide,LN-3, Prepared from Algal Laminaran

Abstract

The primary structure of an elicitor-active oligosaccharide, LN-3, prepared from partially hydrolyzed algal laminaran was determined by means of the analyses of glycosyl-linkage, fragments by acetolysis, and glycosyl-sequence. The elicitor-active oligosaccharide, LN-3, is a pyridylaminated hepta-β-d-glucoside which was shown to have the following linear structure: β-d-Glcp(1→6)-β-d-Glcp(1→3)-β-d-Glcp(1→3)-β-d-Glcp(1→3)-β-d-Glcp(1→6)-β-d-Glcp(1→3)-Glc-PA.     

Carbon-Fluorine Bondings of Fluorinated Fullerene and Graphite

Carbon-fluorine bondings of fluorinated fullerenes and fluorine-graphite intercalation compound C_xF were investigated in detail on the basis of XPS data and the potential model using the charge distribution calculated by semiempirical method. It has been confirmed by the present study that two peaks in the C_1s spectra observed for fluorinated fullerenes are assigned to carbon atoms bonded to fluorine atoms and those unbound to fluorine atoms, and the small difference in charges and Madelung potentials of fluorine atoms in different circumstances well explains the single peak in F_1s spectra of fluorinated fullerenes. In the calculated structures of 1,3-C₆₀F₂ and 1,2-C₆₀F_x (x = 2?6) used as the models of C_xF, three kinds of carbon-fluorine bondings were observed corresponding to nearly ionic, semicovalent and covalent C? F bondings. The calculated result supports that the bi-intercalation structure of stage 1 C_xF consists of nearly ionic and semi-covalent fluorines.