Phenomenological analysis of elongational flow birefringence in semidilute solutions of hydroxypropylcellulose

The relaxation time of a polymer chain in an elongational flow field was investigated for hydroxypropylcellulose (HPC) semidilute solution systems by two methods: phenomenological analysis of elongational flow-induced birefringence, and dynamic light scattering (DLS) and rheological measurements. To understand the relaxation time of an entangled semiflexible polymer solution in an elongational flow field, scaling analysis of the elongational flow-induced birefringence curve was performed. The results of both temperature and concentration scaling analyses showed that birefringence curves at different temperatures and at several HPC concentrations were described well by a universal birefringence–strain rate curve. This scaling behavior was compared with the "fuzzy cylinder" model. The critical strain rate corresponded to the correlation time of the slow relaxation mode determined by DLS measurement and the relaxation spectrum obtained by dynamic viscoelasticity measurement. The elongational flow-induced birefringence observed in an HPC semidilute solution was concluded to be attributed to the orientation of the HPC segment in the entangled molecular system, because the dominant relaxation mode is found to be the concentration fluctuation of an entangled molecular cluster in a quiescent state.     

Oxytelluration of olefins to (β-alkoxy- and β-hydroxy-alkyl)aryltellurium dihalides and their reactions with reducing agents and aqueous NaOH

Treatment of olefinic hydrocarbons with phenyltellurium tribromide or a mixture of diphenylditelluride and bromine in alcohol affords (β-alkoxyalkyl)phenyltellurium dibromides in fair to good yield (alkoxytelluration of olefins). Various aryltellurium trichlorides, diphenylditelluride/CuCl₂, and phenyltellurocyanate/CuCl₂ can be used for the preparation of (β-alkoxyalkyl)aryltellurium dichlorides. Similar reactions in aqueous tetrahydrofuran or aqueous t-butyl alcohol result in the formation of the corresponding β-hydroxy compound (hydroxytelluration of olefins). The reaction is trans stereospecific in the cases of cis-2-butene and cis- and trans-4-octenes and regiospecific in the cases of all terminal olefins examined (1-hexene, 1-octene, 1-decene, styrene, α-methylstyrene, 2-methyl-1-pentene, and isobutylene), tellurium species attacking the terminal carbon solely. The diorganyltellurium dihalide produced is reduced to the corresponding diorganyltelluride by reducing agents such as N₂H₄, Na₂S, Na₂S₂O₃, and NaHSO₄ in aqueous solution. Treatment of the diorganyltellurium dibromide with aqueous NaOH affords either an allylic ether (by telluroxide elimination) or a telluroxide depending on the structure of the telluroxide.     

Small-angle x-ray scattering from solution of rodlike particles with length distribution

The scattering function of rods with a constant radius, 8 Å, and a length distribution of the Schulz–Zimm type was calculated on a computer as a model of helical synthetic polypeptide. The influence of length and length distribution on the scattered intensity of small-angle x-ray scattering was clarified. As length grows and length distribution broadens it is difficult to obtain reliable values of molecular weight and radius of gyration from a Zimm plot. The influence of length distribution on the mass per unit length, M_q, and the radius of gyration of the cross section, 〈S〉^1/2, from the Guinier plot of the cross-sectional factor decreases as the length increases, and reliable values of M_q and 〈S〉^1/2 can be obtained even for rods with wide distribution for rods more than 600 Å long. In particular, it is pointed out that the value of 〈S〉^1/2 is little influenced by length and length distribution.     

Cationic polymerization of p-methylstyrene initiated by acetyl perchlorate: An approach to living polymerization

The cationic polymerization of p-methylstyrene initiated by acetyl perchlorate at ?78°C led to long-lived (living-like) polymers with a narrow molecular weight distribution (M?_w/M?_n = 1.1–1.4) in methylene chloride containing a common ion salt (n-Bu₄NClO₄) or in a less polar solvent (CH₂Cl₂/toluene, 1/4v/v). Under these conditions, the number-average molecular weight (M?_n) of the polymers increased in proportion to monomer conversion and was regulated by the monomer-to-initiator ratio. When fresh feeds of the monomer were repeatedly added to a completely polymerized solution, the polymerization ensued at the same rate as before and the linear increase in M?_n with monomer conversion continued. The effects of solvent polarity and the common ion salt on the polymerization showed the suppression of the ionic dissociation of the propagating species, resulting in a “nondissociated species,” to be the key factor for the formation of the long-lived polymers.     

Quantitative estimation of NH3 partial pressure in H2 desorbed from the Li-N-H system by Raman spectroscopy

The partial pressure of NH3 gas estimated by Raman spectroscopy indicates that approximately 0.1% NH3 inevitably contaminates the H2 desorbed from a hydrogen storage material composed of LiH and LiNH2 at any temperature up to 400 degrees C in a closed system.     

Preparation of rapidly disintegrating tablet using new types of microcrystalline cellulose (PH-M series) and low substituted-hydroxypropylcellulose or spherical sugar granules by direct compression method

To decrease the sensation of roughness when a tablet, which is rapidly disintegrated by saliva (rapidly disintegrating tablet), is orally taken, we prepared rapidly disintegrating tablets using microcrystalline cellulose (Avicel PH-M series), a new type of pharmaceutical excipient that is spherical and has a very small particle size (particle size, 7-32 microm), instead of conventional microcrystalline cellulose (PH-102) used in the formulation of tablets containing acetaminophen or ascorbic acid as model drugs for tableting study. Tablets (200 mg) prepared using spherical microcrystalline cellulose, PH-M-06, with the smallest particle size (mean value, 7 microm) had sufficient crushing tolerance (approximately, 8 kg) and were very rapidly, disintegrated (within 15 s) when the mixing ratio of PH-M-06 to low-substituted hydroxypropylcellulose (L-HPC) was 9:1. Sensory evaluation by volunteers showed that PH-M-06 was superior to PH-102 in terms of the feeling of roughness in the mouth. Consequently, it was found that particle size is an important factor for tablet preparation using microcrystalline cellulose. It is possible to prepare drugs such as acetaminophen and ascorbic acid (concentration of approximately 50%) in the tablet form using PH-NM-06 in combination with L-HPC as a good disintegrant at a low compression force (1-6 kN). To solve the problem of poor fluidity in the preparation of these tablets, we investigated the use of spherical sugar granules (Nonpareil, NP-101 (sucrose and starch, composition ratio of 7:3), NP-103 (purified sucrose), NP-107 (purified lactose) and NP-108 (purified D-mannitol)). Rapidly disintegrating tablets can be prepared by the direct compression method when suitable excipients such as fine microcrystalline cellulose (PH-M-06) and spherical sugar granules (NP) are used.     

Cyclic esters of aliphatic diacids with pyrocatechol and hydroquinone

Cyclic esters of adipic acid, suberic acid and sebacic acid were prepared by reaction of the acid dichlorides and pyrocatechol or hydroquinone in benzene under high dilution conditions. While only the cyclic dimers could be obtained from hydroquinone, pyrocatechol formed cyclic monomers as well as cyclic dimers (and also a cyclic dimer with succinic acid). The structure of all compounds was confirmed by¹H-NMR- and mass spectra. The crystal structures of the pyrocatechol esters were determined by single crystal X-ray analysis.

---

Cyclische Ester aliphatischer Dicarbonsäuren mit Brenzcatechin und Hydrochinon

Zusammenfassung Es wurden cyclische Ester von Adipinsäure, Korksäure und Sebacinsäure durch Reaktion der entsprechenden Säure-Dichloride mit Brenzcatechin oder Hydrochinon bei hoher Verdünnung hergestellt. Während mit Hydrochinon lediglich die cyclischen Dimeren erhalten werden konnten, wurden mit Brenzcatechin sowohl cyclische Monomere als auch cyclische Dimere erhalten (ebenfalls das cyclische Dimer mit Bernsteinsäure). Die Strukturen wurden mittels¹H-NMR und Massenspektren gesichert. Die Kristallstrukturen der Brenzcatechin-Ester wurden mittels Röntgenstrukturanalyse bestimmt.

     

Multiple fluorescence spectra and stable encapsulation of 7-hydroxy-4-methylcoumarin and rhodamine 6g in silicate glasses by the sol-gel method

7-Hydroxy-4-methylcoumarin(4-methylumbelliferone, HMC) and Rhodamine 6G(R6G) were encapsulated into silicate polymeric glass prepared by the sol-gel method under acidic, basic, and neutral conditions from tetraethyl orthosilicate. The fluorescence spectra of these molecules encapsulated into the xerogel state depend on the used catalysts. Three types of fluorescence emissions having peak wavelengths of ca. 390 nm, 470 nm, and 550 run, respectively, were observed simultaneously in the xerogel state composed of HMC and R6G which were prepared by acid catalysts. The encapsulated HMC remains stable for more than one year in the prepared xerogel. The results open the way to the development of simultaneous three-band laser emissions. The observation of the fluorescence spectrum of HMC is useful for a molecular level photophysical probe elucidating the structural changes oftetraethyl orthosilicate during sol to gel to xerogel transitions.     

A convenient stereoselective synthesis of β-lactams from β-hydroxy-α-thioalkylesters prepared from Michael/aldol tandem reaction or stereoselective addition of thiols to the Baylis-Hillman adducts

A convenient stereoselective synthesis of β-lactams from thio-Michael/aldol tandem adduct is described. syn-Selective tandem reaction followed by amidation and intramolecular S_N2 reaction provided β-lactams in diastereomerically pure form. The tandem reaction with aliphatic aldehydes, on the other hand, afforded a mixture of diastereomers of corresponding tandem adducts in about 3:1 ratio so that the conversion to β-lactams afforded a diastereomeric mixture. As an alternative approach to prepare the tandem adducts, the stereoselective Michael addition of aliphatic thiols to Baylis-Hillman adduct was developed. The stereoselectivity was sensitive to the protective group at the hydroxyl group and TBS protection brought the most successful syn-selective formation of the tandem adducts. The procedure could be applied to the ketone derivatives of the Baylis-Hillman adduct but no selectivity was observed for the nitrile-Baylis-Hillman adducts. A similar conversion of the adduct provided desired β-lactams stereoselectively.