A study on the conformation-anomeric effect-stereoselectivity relationship in anomeric radical reactions,using conformationally restricted glucose derivatives as substrates

We previously theorized that, since the stereoselectivity of anomeric radical reactions is significantly influenced by the kinetic anomeric effect, which can be controlled by restricting the conformation of the radical intermediate, the proper conformational restriction of the pyranose ring of the substrates would therefore make highly alpha- and beta-stereoselective anomeric radical reactions possible. This theory was based on our previous results of the anomeric radical reactions with d-xylose derivatives as the substrates. We herein report the anomeric radical deuteration reactions with the conformationally restricted 1-phenylseleno-d-glucose derivatives, 2g and 3g, restricted in a (4)C(1)-conformation by an O-cyclic diketal moiety, and 4g, 5g, 6g, 7g, and 8g, restricted in a (1)C(4)-conformation by bulky O-silyl protecting groups. The radical deuterations with Bu(3)SnD, using the (4)C(1)-restricted substrates 2g and 3g, afforded the corresponding alpha-products (alpha/beta = 98:2) highly stereoselectively, whereas the (1)C(4)-restricted substrate 6g, having a trigonal (sp(2)) carbon substituent, i.e., -CHO, at the 5-position, selectively gave the beta-products (alpha/beta = 0:100). Thus, the stereoselectivity was significantly increased by the conformational restriction and was completely inverted by changing the substrate conformation from the (4)C(1)-form to the (1)C(4)-form. On the other hand, the deuterations with the (1)C(4)-restricted substrates 4g and 5g showed that the 1,5-steric effect due to the tetrahedral carbon substituent (-CH(2)OTIPS or -CH(2)OH) at the 5-axial position dominantly prevented the hydride transfer from the beta-face competing with the kinetic anomeric effect. This study suggests that, depending on the restricted conformation of the substrates to the (4)C(1)- or the (1)C(4)-form, the alpha- or beta-products would be obtained highly stereoselectively via anomeric radical reactions of hexopyranoses.     

Synthesis and characterization of ordered polyurethanes from nonsymmetric diisocyanate and ethylene glycol

An ordered polyurethane with a head‐to‐head (H‐H) or tail‐to‐tail (T‐T) content over 95% was prepared by polyaddition reaction of a nonsymmetric monomer, p‐isocyanatobenzyl isocyanate (1) with a symmetric monomer, ethylene glycol (2). The model reactions were studied in detail to demonstrate the feasibility of polymer formation. The polymerization was conducted in THF in the presence of triethylamine (TEA) at 0 °C by slow addition of a half amount of 2 to 1, followed by removing THF and then adding the rest of 2 in DMF at once at 30 °C in the presence of dibutyltin dilaurate (DBTL). The microstructure of the polymer obtained was investigated by ¹³C NMR spectroscopy, and it was found that the polymer had the expected structural regularity. The constitutional regularity of polymers influenced their thermal properties. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2106–2114, 2000     

Novel Method for the Fabrication of a Charge‐Transfer Complex Crystal by Photoirradiation

A novel method for the fabrication of a charge‐transfer complex crystal was developed. Photoirradiation of a solution of TPP[Co(tbp)(CN)₂] and TPP[Co(Pc)(CN)₂] (tbp=tetrabenzoporphyrin, Pc=phthalocyanine, TPP=tetraphenylphosphonium) gave a molecular conducting crystal of a charge‐transfer complex TPP[Co(tbp)(CN)₂]₂, which was produced by the process in which the photoexcited electron in tbp was transferred from the LUMO of tbp to that of Pc.     

Amine‐Responsive Adaptable Nanospaces: Fluorescent Porous Coordination Polymer for Molecular Recognition

Flexible and dynamic porous coordination polymers (PCPs) with well‐defined nanospaces composed of chromophoric organic linkers provide a scaffold for encapsulation of versatile guest molecules through noncovalent interactions. PCPs thus provide a potential platform for molecular recognition. Herein, we report a flexible 3D supramolecular framework {[Zn(ndc)(o‐phen)]?DMF}_n (o‐phen=1,10‐phenanthroline, ndc=2,6‐napthalenedicarboxylate) with confined nanospaces that can accommodate different electron‐donating aromatic amine guests with selective turn‐on emission signaling. This system serves as a molecular recognition platform through an emission‐readout process. Such unprecedented tunable emission with different amines is attributed to its emissive charge‐transfer (CT) complexation with o‐phen linkers. In certain cases this CT emission is further amplified by energy transfer from the chromophoric linker unit ndc, as evidenced by single‐crystal X‐ray structural characterization.     

57Fe-Mössbauer study of electrically conductive alkaline iron vanadate glasses

A relationship between local structure, thermal stability and electrical conductivity (σ) of xR₂O·10Fe₂O₃·(90 ? x)V₂O₅ glasses (abbreviated as xRFV glasses, where R = Li, Na, K; x = 20 and 40 in mol %) was investigated by ⁵⁷Fe-Mössbauer spectroscopy, X-ray diffractometry, differential thermal analysis (DTA) and DC two- and four-probe method. From DTA study, thermal stability of 20RFV glasses is lower than that of 40RFV glasses by evaluating Hruby parameter (K _gl). Constant activation energy for crystallization (E _a) of 2.5 eV obtained from both 20RFV and 40RFV glasses indicate that the crystallization proceeds with the cleavage of Fe–O bond having the energy of 2.6 eV. Isochronally annealed 20RFV glass at 400–450 °C resulted in the increase in electrical conductivity (σ) from the order of 10^?3 to 10^?1 S cm^?1, whereas slight decrease in σ was observed for 20RFV glass annealed above 460 °C. A paramagnetic doublet with an identical isomer shift (δ) of 0.39 mm s^?1 was observed in the ⁵⁷Fe-Mössbauer spectra of 20RFV glass after isothermal annealing conducted at 400–450 °C for 100 min, which caused a decrease of quadruple splitting (Δ) from 0.67 to 0.52 mm s^?1 for 20LiFV glass and from 0.66 to 0.53 mm s^?1 for 20NaFV glass. On the other hand, three paramagnetic doublets with δ and Δ of 0.40 and 0.25, 0.38 and 0.60, and 0.31 and 1.11 mm s^?1 respectively were observed for 20RFV glass annealed at 460–550 °C, reflecting precipitation of semiconducting FeVO₄ phase having σ of 6.0 × 10^?7 S cm^?1. It can be concluded that isochronal annealing of 20RFV glass below 450 °C resulted in increase in σ due to the structural relaxation, while annealing above 500 °C resulted in the decrease of σ due to the precipitation of FeVO₄ phase.     

Rational Molecular Design towards Vis/NIR Absorption and Fluorescence by using Pyrrolopyrrole aza‐BODIPY and its Highly Conjugated Structures for Organic Photovoltaics

Pyrrolopyrrole aza‐BODIPY (PPAB) developed in our recent study from diketopyrrolopyrrole by titanium tetrachloride‐mediated Schiff‐base formation reaction with heteroaromatic amines is a highly potential chromophore due to its intense absorption and fluorescence in the visible region and high fluorescence quantum yield, which is greater than 0.8. To control the absorption and fluorescence of PPAB, particularly in the near‐infrared (NIR) region, further molecular design was performed using DFT calculations. This results in the postulation that the HOMO–LUMO gap of PPAB is perturbed by the heteroaromatic moieties and the aryl‐substituents. Based on this molecular design, a series of new PPAB molecules was synthesized, in which the largest redshifts of the absorption and fluorescence maxima up to 803 and 850 nm, respectively, were achieved for a PPAB consisting of benzothiazole rings and terthienyl substituents. In contrast to the sharp absorption of PPAB, a PPAB dimer, which was prepared by a cross‐coupling reaction of PPAB monomers, exhibited panchromatic absorption across the UV/Vis/NIR regions. With this series of PPAB chromophores in hand, a potential application of PPAB as an optoelectronic material was investigated. After identifying a suitable PPAB molecule for application in organic photovoltaic cells based on evaluation using time‐resolved microwave conductivity measurements, a maximized power conversion efficiency of 1.27 % was achieved.     

Investigation on the Surface‐Confined Self‐Assembly Stabilized by Hydrogen Bonds of Urea and Amide Groups: Quantitative Analysis of Concentration Dependence of Surface Coverage

Formation of a hydrogen‐bond network via an amide group is a key driving force for the nucleation–elongation‐type self‐assembly that is often seen in biomolecules and artificial supramolecular assemblies. In this work, rod‐coil‐like aromatic compounds bearing an amide ( 1 a – 3 a ) or urea group ( 1 u – 3 u ) were synthesized, and their self‐assemblies on a 2‐D surface were investigated by scanning tunneling microscopy (STM). According to the quantitative analysis of the concentration dependence of the surface coverage, it was revealed that the strength of the hydrogen bond (i.e., amide or urea) and the number of non‐hydrogen atoms in a molecular component (i.e., size of core and length of alkyl side chain) play a primary role in determining the stabilization energy during nucleation and elongation processes of molecular ordering on the HOPG surface.     

Regulation of the Cyanobacterial Circadian Clock by Electrochemically Controlled Extracellular Electron Transfer

There is growing awareness that circadian clocks are closely related to the intracellular redox state across a range of species. As the redox state is determined by the exchange of the redox species, electrochemically controlled extracellular electron transfer (EC‐EET), a process in which intracellular electrons are exchanged with extracellular electrodes, is a promising approach for the external regulation of circadian clocks. Herein, we discuss whether the circadian clock can be regulated by EC‐EET using the cyanobacterium Synechococcus elongatus PCC7942 as a model system. In vivo monitoring of chlorophyll fluorescence revealed that the redox state of the plastoquionone pool could be controlled with EC‐EET by simply changing the electrode potential. As a result, the endogenous circadian clock of S. elongatus cells was successfully entrained through periodically modulated EC‐EET by emulating the natural light/dark cycle, even under constant illumination conditions. This is the first example of regulating the biological clock by electrochemistry.     

Direct construction of bicyclic heterocycles by palladium-catalyzed domino cyclization of propargyl bromides

The palladium-catalyzed domino cyclization of propargyl bromides having two nucleophilic functional groups is described. Treatment of 1,7-diamino-5-bromohept-3-yne derivatives with catalytic Pd(PPh3)4 in the presence of NaH in MeOH gives the 2,7-diazabicyclo[4.3.0]non-5-enes in good yields. Interestingly, the regioselectivity of the reaction is completely controlled by the relative reactivity of the amine functional groups, irrespective of the position of the nucleophiles. The malonate derivative also undergoes domino cyclization to produce a hexahydroindole derivative.     

Amphiphilic molecular design as a rational strategy for tailoring bicontinuous electron donor and acceptor arrays: photoconductive liquid crystalline oligothiophene--C60 dyads

For tailoring solution-processable optoelectronic thin films, a rational strategy with amphiphilic molecular design is proposed. A donor-acceptor dyad consisting of an oligothiophene and C60, when modified with a hydrophilic wedge on one side and a paraffinic wedge on the other (1Amphi), forms over a wide temperature range a photoconducting smectic A liquid crystal having bicontinuous arrays of densely packed donor and acceptor units. In contrast, when modified with only paraffinic wedges (1Lipo), the dyad forms a smectic A liquid crystalline mesophase, which however is poorly conductive. As indicated by an absorption spectral feature along with a synchrotron radiation small-angle X-ray scattering profile, 1Lipo in the lamellar structure does not adopt a uniform head/tail orientation. Such defective donor and acceptor arrays likely contain a large number of trapping sites, leading to short-lived charge carriers, as observed by a flash photolysis time-resolved microwave conductivity study.