Design of Hollow Protein Nanoparticles with Modifiable Interior and Exterior Surfaces

Protein‐based nanoparticles hold promise for a broad range of applications. Here, we report the production of a uniform anionic hollow protein nanoparticle, designated TIP60, which spontaneously assembles from a designed fusion protein subunit based on the geometric features of polyhedra. We show that TIP60 tolerates mutation and both its interior and exterior surfaces can be chemically modified. Moreover, TIP60 forms larger structures upon the addition of a cationic protein. Therefore, TIP60 can be used as a modifiable nano‐building block for further molecular assembly.     

Coupling selectivity in the radical‐controlled oxidative polymerization of 4‐phenoxyphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane)copper(II) complex

Various effects on the coupling selectivity of the oxidative polymerization of 4‐phenoxyphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane)copper(II) halogeno complex [Cu(tacn)X₂] are described. With respect to the amount of the catalyst and the nature of the halide ion (X) of Cu(tacn)X₂, the coupling selectivity hardly changed. The Cu(tacn) catalyst possessed a turnover number greater than 1860. As the temperature of the reaction and the polarity of the reaction solvent were elevated, the C O coupling at the o‐position increased, but the C C coupling was not involved. For the polymerization in toluene at 80 °C, poly(1,4‐phenylene oxide), obtained as a methanol‐insoluble part, showed the highest number‐average molecular weight of 4000 with a melting point (T_m) of 195 °C. Only a slight change in the coupling selectivity was observed in the presence or absence of hindered amines as the base. Surprisingly, however, the C O selectivity decreased from 100 to 24% with less hindered amines, indicating that the selectivity drastically changed from a preference for C O coupling to a preference for C C coupling. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4792–4804, 2000     

Synthesis and Characterization of the First Double-Bridged Tetraselenafulvalenophanes

Recrystallization of the isomeric mixtures of 1 a and 1 b obtained by synthesis gave single crystals of the cis-trans and cis-cis isomers, respectively. The unique stacked structures of these compounds were elucidated by X-ray structure analysis.     

Formation of poly(vinyl alcohol)–iodine complexes in solution

The effect of the dissolved state of poly(vinyl alcohol) (PVA) molecules in water on the color development due to PVA–iodine complexes was investigated at each given PVA and iodine concentration using two kinds of syndiotactic-rich PVA (S-PVA) which are unstable in water because of the formation of intermolecular hydrogen bonds and form the complex easily. In the reaction mixtures prepared by mixing PVA solutions and an iodine solution, the color development was constant and independent of standing time of the PVA solution before the addition of iodine up to a certain time, after which it decreased with the standing time. The color development obtained with use of the PVA solution allowed to stand for a fixed time was higher for S-PVA with a lower s-(diad)%. In the case of the reaction mixture prepared by dissolving PVA in an iodine solution, the color development was higher for S-PVA with a higher s-(diad)%. The initial ratio of the I₅⁻/I₃⁻ and the rate of decrease in the ratio of I₅⁻/I₃⁻ were larger than those in the preceding case. The color development decreased for the PVA with an s-(diad) % of 58, whereas it increased for the PVA an s-(diad) % of 61.3 with increasing propanol content, an inhibitor of gelation. From these results, the aggregates of PVA molecules have been assumed to play an important role in forming the complexes. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1701–1709, 1997     

Well‐Controlled Biodegradable Nanocomposite Foams: From Microcellular to Nanocellular

Via a batch process in an autoclave, the foam processing of neat polylactide (PLA) and two different types of PLA/layered silicate nanocomposites has been conducted using supercritical carbon dioxide as a foaming agent. The morphological correlation between the dispersed silicate particles with nanometer dimensions in the bulk and the obtained closed‐cell structure of the foam is discussed. This is the first report that deals with the possibility of preparing biodegradable nanocellular polymeric foams via nanocomposite technology.

SEM image of the freeze‐fracture surface of a PLA/layered silicate foam, exhibiting closed‐cell structure.     

Synthesis of ladder polymers containing polydiacetylene backbones connected with methylene chains and their optical properties

The polymers consisting of polydiacetylene (PDA) backbones were obtained from the novel monomer derivatives, R CC CC R′ CC CC R [where R =  (CH₂)₄OCONHCH₂COOC₄H₉, R′ =  (CH₂)_n ; n = 2, 4, 8] [4BCMU4A(n)], in which linear methylene chain is sandwiched between two diacetylene moieties by solid-state 1,4-addition reaction. The polymerization process was investigated in detail by using spectroscopic techniques such as solid-state ¹³C-NMR, visible absorption, and IR absorption spectra. It was estimated that the polymerization of 4BCMU4A(8) and 4BCMU4A(4) takes place by two consecutive 1,4-addition reactions to form two PDA backbones, which constitute the two poles of the respective ladders. The bridging methylene chain length in the monomer was found to play a vital role as far as the polymerization process is concerned. Thus, the monomers with eight or four methylene units could form the ladder–PDAs by a two-step process, whereas the monomer containing two methylene units could only undergo one-step of 1,4-addition reaction. Further, it was found that the crystallinity of the polymers depends on the methylene chain length in the monomers, 4BCMU4A(8) being the most crystalline of all. These structural features strongly affect their absorption spectra. The third-order nonlinear optical susceptibilities (χ⁽³⁾) for these polymers were measured using third-harmonic generation method. The largest χ⁽³⁾ value obtained was 3.4 × 10⁻¹¹ esu for the poly[4BCMU4A(8)] thin film in resonant region. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3537–3548, 1999     

Nanosized starlike molecules. Synthesis and optical properties of tris- and tetrakis[oligo(disilanylenebithienylene)dimethylsilyl]benzene

The syntheses of two types of starlike molecules with the arms that extend to three and four directions have been reported. The molecules with the arms consisting of a regular alternating arrangement of a silicon-silicon bond and bithienylene unit that extend to three directions were synthesized by the reactions of 1,3,5-tris(chlorodimethylsilyl)benzene, which was chosen as a core, with the lithio[oligo(disilanylenebithienylene)] derivatives. The starlike molecules with extended arms to four directions were prepared by the reaction of 1,2,4,5-tetrakis(fluorodimethylsilyl)benzene used as a core, with lithio[oligo(disilanylenebithienylene)]s. UV-Vis absorption and fluorescence properties of these starlike molecules have been investigated in a dioxane solution. The present molecules showed absorption maxima in a range of 321-337 nm, and revealed higher fluorescence quantum yields than that of the corresponding linear polymer, poly[(tetraethyldisilanylene)bithiophene].     

Experimental probe for hyperconjugative resonance contribution in stabilizing the singlet state of 2,2-dialkoxy-1,3-diyls: Regioselective 1,2-oxygen migration

A detailed study of the regioselectivity of 1,2-oxygen migration was conducted using the unsymmetrically substituted singlet 2,2-dialkoxy-1,3-diarylcyclopentane-1,3-diyls 5. The alkoxy group selectively migrates to the electron-donating p-methoxyphenyl-substituted carbon. The regioselective migration of oxygen clearly indicates a hyperconjugative resonance structure, that is, zwitterionic characteristics, in singlet 2,2-dialkoxy-1,3-diyls. This represents the first attempt to experimentally probe the contribution of hyperconjugation to stabilizing the singlet state.     

Magnetic resonance differentiation between T2 and T1 gallbladder carcinoma: significance of subserosal enhancement on the delayed phase dynamic study

Purpose

The aim of this study is to investigate whether subserosal enhancement on the delayed-phase dynamic magnetic resonance (MR) study (SED) can differentiate T2 from T1 gallbladder carcinoma (GBC).

Methods

The institutional research board approved this retrospective study. Between 1997 and 2006, there were surgically proven 11 T1 and 21 T2 GBC in 30 patients, all of whom had undergone preoperative contrast enhanced dynamic MR study, either with a 2D sequence (n=17) or 3D sequences (n=15). All images were reviewed by two radiologists for the presence of SED, and receiver operating characteristic (ROC) curve analysis was performed. Sensitivity, specificity, positive and negative predictive values were calculated by consensus.

Results

The areas under the ROC curves of the two readers were 0.91 and 0.86, and the kappa value was 0.78. Of the 21 T2 GBC, 18 and 3 showed positive and negative SED, respectively. Of the 11 T1 GBC, 1 and 10 showed positive and negative SED, respectively. The sensitivity, specificity, positive and negative predictive values of SED for diagnosing T2 lesions were 86%, 88%, 91% and 77%, respectively.

Conclusions

In conclusion, SED may be a useful sign to differentiate T2 from T1 GBC, which would affect the preoperative surgical planning of the patients.