Determination of the acid value of instant noodles: interlaboratory study

An interlaboratory study was performed to evaluate the method for determining the acid value of instant noodles, based on the Japanese Agricultural Standard (JAS), with extraction of lipid using petroleum ether at a volume of 100 mL to the test portion of 25 g. Thirteen laboratories participated and analyzed 5 test samples as blind duplicates. Statistical treatment revealed that the repeatability (RSDr) of acid value was <6.5%, and the reproducibility (RSDR) of acid value was <9.6%. The HorRat values (RSDR/predicted RSDR) were 1.2-1.8, where the RSDR and the predicted RSDR were obtained in terms of free fatty acids in the noodles per unit weight, using the equation [acid value = percent free fatty acids (as oleic) x 1.99] and the extracted lipid contents. This method was shown to have acceptable precision by the present study.     

Protective effects of a neutral polysaccharide isolated from the mycelium of Antrodia cinnamomea on Propionibacterium acnes and lipopolysaccharide induced hepatic injury in mice

Mycelia of Antrodia cinnamomea were extracted with chloroform and hot water. A neutral polysaccharide named ACN2a separated from the water extract was purified using 10% CCl3COOH, and repeated column chromatography on HW-65 and DE-52 cellulose. Its structure was determined by chemical and spectroscopic analyses. ACN2a was composed of Gal, Glc, Fuc, Man and GalN (in the ratio 1:0.24:0.07:0.026:faint), in which an alpha-D-(1-->6)-Gal linkage accounted for 73% of all linkages. The ratio of branch points was about 16% of the total residual numbers, and branches were attached to C-2 of galactosyl residues of the main chain. ACN2a had an average molecular weight of 12.9x10(5) Daltons, [alpha]D25=+115 degrees (c=0.44, H2O); [eta]=0.0417dl.g-1, Cp=0.2663 cal/(g. degrees C). The hepatoprotective effect of ACN2a was evaluated using a mouse model of hepatic injury that was induced by Propionibacterium acnes (P. acnes) and lipopolysaccharide (LPS). The administration of ACN2a (0.4, 0.8 g/kg/d, p.o.), significantly prevented increases in serum aspartate aminotransferase (AST) and alanine aminotransferase (ALT) enzyme activities in mice treated with P. acnes-LPS, indicating hepatoprotective activity in vivo.     

Proteo-dendrimers designed for complementary recognition of cytochrome c: dendrimer architecture toward nanoscale protein complexation

"Proteo-dendrimers" in which polyanionic hepta(glutamic acids), fluorescent zinc porphyrinate cores, hydrophilic polyether surfaces, and nonpeptide hydrophobic dendrons are combined, were developed as a new series of synthetic receptors for protein recognition. They have polyanionic "patch" structures on their surfaces and undergo complementary electrostatic interactions with a positively charged cytochrome c patch, as observed in biological protein-protein recognition systems. Stability constants of the resulting supramolecular complexes were determined in phosphate buffer (pH 7) by monitoring the fluorescence quenching of the zinc porphyrinates. These proteo-dendrimer receptors exhibited higher affinities with cytochrome c proteins in aqueous solutions than with biological cytochrome b5. Furthermore, they effectively blocked complexation of biological cytochrome b5 with cytochrome c, indicating that the proteo-dendrimers and cytochrome b5 similarly occupy the polycationic patch of cytochrome c.     

Thieno[3,4-c]pyrrole-incorporated quinoidal terthiophene with dicyanomethylene termini: synthesis, characterization, and redox properties

Synthesis, characterization, molecular structure, and redox properties of a new quinoidal terthiophene incorporated with a thieno[3,4-c]pyrrole moiety (5) are described. Although an electrochemical reduction of 5 formally produces the non-classical thieno[3,4-c]pyrrole moiety, 5 showed a reversible reduction wave on cyclic voltammogram, indicating that the thieno[3,4-c]pyrrole moiety can be stabilized by delocalized 10π-conjugated system in the dianion state of 5. However, the reduction potential was largely affected by incorporation of the thieno[3,4-c]pyrrole and shifted cathodically by 0.4 V compared to that of the parent quinodial terthiophene (1).     

Certified reference material for quantification of polycyclic aromatic hydrocarbons in sediment from the National Metrology Institute of Japan

The National Metrology Institute of Japan has issued a certified reference material (CRM) of freshwater lake sediment for polycyclic aromatic hydrocarbon (PAHs) analyses. The certification used three extraction techniques: pressurized liquid extraction (PLE) with toluene, PLE with dichloromethane/ethyl acetate (1:1 by volume), and alkaline extraction (1 M KOH in methanol) in combination with microwave-assisted extraction. Both gas chromatography/mass spectrometry (GC/MS) and liquid chromatography/dopant-assisted atmospheric pressure photoionization/MS (LC/DA-APPI/MS) analyses were used. Certified values are provided for 18 PAHs at 1–25 μg kg⁻¹ except for perylene (2.08 × 10³ μg kg⁻¹), and information values are provided for two. Since the values of PAHs in the CRM are much lower than those in other CRMs and are comparable to those found at sites with little human influence, the CRM is suitable for PAH monitoring in sediment and soil samples.     

In vitro degradation of biodegradable polymer-coated magnesium under cell culture condition

Magnesium (Mg) coated with four kinds of polymers, poly (l-lactic acid) (PLLA)-high molecular weight (HMW), PLLA-low molecular weight (LMW), poly (?-caprolactone) (PCL)-HMW and PCL-LMW, and uncoated Mg were immersed under cell culture condition to study the degradation/corrosion behavior of the polymer-coated Mg. The releases of Mg²⁺ are measured during the immersion. Surface morphology and chemical composition are observed and identified by SEM and EDX. The tomography is obtained by X-ray CT observation and degradation rate is calculated by image analysis after 10-day immersion. All kinds of polymer-coated Mg showed significantly low release of Mg²⁺ (p < 0.05) in the whole immersion process comparing to that of uncoated Mg. In SEM and EDX results show, a corrosion layer can be observed on both polymer-coated and uncoated Mg after immersion. There is no obvious difference on the morphology and chemical composition of the corrosion layer between polymer-coated and uncoated Mg, indicating the corrosion/degradation process and corrosion product of Mg substrate are not changed by the polymer films under the present condition compared with uncoated Mg. Concerning the tomography and degradation rate of 10-day immersion, it can be found that the polymer-coated Mg shows a significantly low corrosion rate (p < 0.05) compared with that of uncoated Mg. PLLA coated Mg shows relatively uniform corrosion than PCL coated Mg and uncoated Mg. The largest pitting corrosion depth of PCL-LMW is about 3 times as large as the PLLA-LMW, which might be attributed to the difference of polymer microstructure. It is suggested that PLLA coating might be a suitable option for retarding the loss of mechanical properties of Mg substrate.     

Synthesis of Deuterium-Labeled Vitamin D Metabolites as Internal Standards for LC-MS Analysis

Blood levels of the vitamin D₃ (D₃) metabolites 25-hydroxyvitamin D₃ (25(OH)D₃), 24R,25-dihydroxyvitamin D₃, and 1α,25-dihydroxyvitamin D₃ (1,25(OH)₂D₃) are recognized indicators for the diagnosis of bone metabolism-related diseases, D₃ deficiency-related diseases, and hypercalcemia, and are generally measured by liquid-chromatography tandem mass spectrometry (LC-MS/MS) using an isotope dilution method. However, other D₃ metabolites, such as 20-hydroxyvitamin D₃ and lactone D₃, also show interesting biological activities and stable isotope-labeled derivatives are required for LC-MS/MS analysis of their concentrations in serum. Here, we describe a versatile synthesis of deuterium-labeled D₃ metabolites using A-ring synthons containing three deuterium atoms. Deuterium-labeled 25(OH)D₃ (2), 25(OH)D₃-23,26-lactone (6), and 1,25(OH)₂D₃-23,26-lactone (7) were synthesized, and successfully applied as internal standards for the measurement of these compounds in pooled human serum. This is the first quantification of 1,25(OH)₂D₃-23,26-lactone (7) in human serum.     

Thermal polymerizations of alkali 4-(1-bromoethyl)benzoates

Thermal reactions of alkali salts of 4-(1-bromoethyl)benzoic acid in bulk were investigated. These reactions were found to produce unexpectedly the graft copolymer, poly(4-vinylbenzoate)-graft-oligo(oxycarbonyl-1,4-phenylenethylidene) ( 1 ). The relative reactivity of the oligocondensation as well as the vinyl polymerization of the salts decreased in the following order: K > Na > Li. The reaction polymerization rate proceeded rapidly during the initial 15 min, and then slowed down.     

Noncovalent Modification of Cycloparaphenylene by Catenane Formation Using an Active Metal Template Strategy**

The active metal template (AMT) strategy is a powerful tool for the formation of mechanically interlocked molecules (MIMs) such as rotaxanes and catenanes, allowing the synthesis of a variety of MIMs, including π-conjugated and multicomponent macrocycles. Cycloparaphenylene (CPP) is an emerging molecule characterized by its cyclic π-conjugated structure and unique properties. Therefore, diverse modifications of CPPs are necessary for its wide application. However, most CPP modifications require early stage functionalization and the direct modification of CPPs is very limited. Herein, we report the synthesis of a catenane consisting of [9]CPP and a 2,2′-bipyridine macrocycle as a new CPP analogue that contains a reliable synthetic scaffold enabling diverse and concise post-modification. Following the AMT strategy, the [9]CPP-bipyridine catenane was successfully synthesized through Ni-mediated aryl-aryl coupling. Catalytic C−H borylation/cross-coupling and metal complexation of the bipyridine macrocycle moiety, an effective post-functionalization method, were also demonstrated with the [9]CPP-bipyridine catenane. Single-crystal X-ray structural analysis revealed that the [9]CPP-bipyridine catenane forms a tridentated complex with an Ag ion inside the CPP ring. This interaction significantly enhances the phosphorescence lifetime through improved intermolecular interactions.