Preparation of Colloidal Rhodium in Poly(vinyl Alcohol) by Reduction with Methanol

Refluxing of a solution of poly(vinyl alcohol) and rhodium(III) chloride in methanol-water gives a colloidal dispersion of rhodium which is an effective catalyst for hydrogenation of cyclohexene in methanol at 30°C under atmospheric hydrogen pressure. Formaldehyde is produced quantitatively with the reduction of rhodium(III) chloride to metallic rhodium. The rhodium particles in the colloidal dispersion are found to consist of two kinds of particles, about 8 and 40 Å in diameter by electron microscopy. The sizes of the small (8 Å) and large (40 Å) particles are almost constant during the course of refluxing. The number of small particles, which is the great majority of particles at the early stage of refluxing, gradually decreases; concurrently the number of large particle increases on prolonged refluxing. An absorption peak appears at 260 nm at the early stage of refluxing. The presence of the 260 nm peak, which indicates the coordination of poly(vinyl alcohol) to rhodium(III) ion, is indispensable for the formation of a homogeneous colloidal dispersion of rhodium. The addition of ethylenediamine inhibits the formation of colloidal rhodium in refluxing. The catalytic activity of colloidal dispersion of rhodium is dependent upon the concentration of rhodium(III) chloride charged and is independent of that of poly(vinyl alcohol). The formation mechanism of colloidal rhodium is discussed.     

Structure‐Dependent Demetalation Kinetics of Chlorophyll a Analogs under Acidic Conditions

Demetalation of chlorophyll (Chl) a and its analogs is an important reaction in oxygenic photosynthetic organisms, which produces the primary electron acceptors in photosystem II reaction centers and is crucial in the Chl degradation. From these viewpoints, demetalation reactions of four Chl a analogs, 3,8‐divinyl‐Chl a (DV‐Chl a), 3‐devinyl‐3‐ethyl‐Chl a (mesoChl a), 13²‐demethoxycarbonyl‐Chl a (pyroChl a) and protochlorophyll a (PChl a), were kinetically analyzed under weakly acidic conditions, and were compared with that of Chl a. DV‐Chl a exhibited slower demetalation kinetics than did Chl a, whereas demetalation of mesoChl a was faster than that of Chl a. The difference in demetalation kinetics of the three chlorophyllous pigments originates from the electron‐withdrawing ability of the vinyl group as the peripheral substituent compared with the ethyl group. Removal of the electron‐withdrawing and homoconjugating 13²‐methoxycarbonyl group in Chl a (Chl a → pyroChl a) accelerated demetalation kinetics by two‐fold. PChl a possessing the porphyrin‐type skeleton exhibited slower demetalation kinetics than Chl a. The structure‐dependent demetalation properties of Chl a analogs will be useful for understanding in vivo Chl demetalation reactions in oxygenic photosynthetic organisms.     

Ternary Molecular Complex in the Alternating Copolymerization of Methyl Methacrylate with Styrene Using Stannic Chloride

The equimolar alternating copolymerization of methyl methacrylate (MMA) with styrene (St) in the presence of stannic chloride in toluene (Tl) is investigated kinetically. The concentrations of the ternary molecular complexes, [SnCl₄-MMA … St] and [SnCl₄-MMA … T1], are calculated by use of the formation constants of the ternary molecular complexes. The rates of copolymerization under photo-irradiation and with tri-n-butyl boron-benzoyl peroxide as an initiator are proportional to the 1.5th order and 1. Oth order, respectively, of the concentration of the ternary molecular complex [SnCl₄ · MMA … St]. The alternating copolymerization precedes the homopolymerization of the methyl methacrylate charged in excess. The alternating regulation of the copolymerization is ascribed to the homopolymerization of the ternary molecular complex from the kinetic results. The magnitudes of the shifts for     

Preparation of Colloidal Transition Metals in Polymers by Reduction with Alcohols or Ethers

Colloidal dispersions of rhodium, palladium, osmium, iridium, and platinum are prepared by refluxing the methanol-water solutions of rhodium(III) chloride, palladium(II) chloride, osmium(VIII) oxide, sodium chloroiridate, and chloroplatinic acid, respectively, in the presence of poly(vinyl alcohol) as a protective colloid. The preparations of colloidal dispersions of rhodium are successful in the presence of vinyl polymer with polar group such as poly(vinyl alcohol), polyvinylpyrrolidone, or poly(methyl vinyl ether). Polyethyleneimine, gelatin, polyethylene glycol), and dextran are ineffective as the protective colloid. Water-soluble primary alcohols such as methanol and ethanol, water-soluble secondary alcohols such as 2-propanol, and water-soluble diethers such as 1,4-dioxane are available as reductants for preparation of the colloidal dispersion of rhodium. The average diameters of metal particles in the colloidal dispersions of palladium, rhodium, platinum, iridium, and osmium in poly(vinyl alcohol) are determined by electron microscopy to be 53, 40, 27, 14, and < 10 Å, respectively. The particle size distribution in each colloidal dispersion is sharp within 50 Å wide. The particles in the colloidal dispersions of both iridium and osmium are highly dispersed with no aggregation, while in the colloidal dispersions of rhodium, palladium, and platinum, there exist aggregates of 5-15, 5-30, and 100-200 particles, respectively. Colloidal dispersions of rhodium, palladium, osmium, and platinum are effective as catalysts for hydrogenation of cyclohexene at 30.0°C under atmospheric hydrogen pressure.     

Synthesis of a phloroacetophenon[4]arene consisting of four isomers via the one-pot,acid-catalysed condensation of phloroacetophenone with benzaldehyde

A phloroacetophenon[4]arene (3) consisting of four isomers was synthesised for the first time via the condensation of phloroacetophenone and benzaldehyde in a one-pot reaction with refluxing toluene in the presence of catalytic amounts of TsOH·H₂O for a maximum yield of 64%. The conformational elucidation of four isomers (3a–d) by ¹H NMR spectroscopy and X-ray crystal structure analysis showed them to be cone, partial cone, 1,3-alternate and 1,2-alternate types of conformations, respectively.     

Liquid phase separation of polyaromatics on [Cu2(BDC)2(dabco)

The porous coordination polymer (PCP) [Cu(2)(BDC)(2)(dabco)] is capable of selectively adsorbing up to 25 wt % of either 1-methylnaphthalene or 2-methylnaphthalene. Uptakes of unsubstituted naphthalene and 1,4-dimethylnaphthalene are significantly lower (7-13 wt %), suggesting that monomethyl substituted polyaromatics can be separated from the other fractions. Furthermore, this PCP can perform the difficult separation of 1-methylnaphthalene from 2-methylnaphthalene with separation factors as high as 2.6, proving that specific interactions of the methyl group with the lattice play an important role in determining the adsorption selectivity.     

Influence of plasticizer content on the transition of electromechanical behavior of PVC gel actuator

The actuation performance of plasticized poly(vinyl chloride) (PVC) gel actuators in an electric field depends on their chemical composition and electrical and mechanical properties. The influence of plasticizer (dibutyl adipate) content on electromechanical behavior of PVC gels was investigated by impedance spectroscopy and space charge measurement. By plasticizing the PVC, the dielectric constant and space charge density of PVC gel were drastically increased at 1:2 w/w ratio of PVC to plasticizer. To apply the results obtained from the impedance spectroscopy and space charge measurement, electrostatic adhesive forces generated between the PVC gel and the anode were measured. The electrostatic adhesive force at the anode was also dramatically increased at the same plasticizer content. All of the results indicated a transition of electromechanical behavior of PVC gel in the electric field, which was considered to originate from the orientation of polarized plasticizer molecules and dipole rotation of PVC chains. By using the electrostatic adhesive force of PVC gel derived from the electromechanical transition, a new electroactive actuator can be developed for novel applications.     

Enhanced performance of photorefractive poly(N‐vinyl carbazole) composites

We present the enhanced photorefractive performance of high molecular weight poly(N‐vinyl carbazole) (PVCz)‐based composites. Higher diffraction efficiency with faster speed of grating build‐up was obtained by optimizing the composition of the PVCz composites. At relatively low applied electric field of E = 45 V μm^?1, diffraction efficiency of 26% for p‐polarized probe beam and corresponding that of 5.1% for s‐polarized probe beam were measured with faster grating build‐up speed of 48.3 s^?1 for the composite with 2,4,7‐trinitrofluorenone (TNF) as a sensitizer. Fastest speed of grating build‐up of 100 s^?1 and large optical gain up to 110 cm^?1 were measured at E = 80 V μm^?1 for the composite with fullerene derivative of PCBM as a sensitizer. These improved performances are due to a large orientational enhancement effect with faster response speed in addition to Pockels effect for the samples with appropriate glass transition temperature. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Colorimetric response of spiropyran derivative for anions in aqueous or organic media

We previously found that a simple spiropyran derivative (1:1′,3′,3′-trimethyl-6-nitro-spiro-[2H-1-benzopyran-2,2′-indoline]) behaves as a selective and sensitive cyanide anion (CN⁻) receptor in aqueous media under UV irradiation¹³. The receptor, when irradiated by UV light in a water/MeCN mixture, creates a CN⁻-selective absorption band via a nucleophilic addition of CN⁻ to 1 (formation of the 1-CN⁻ species) and allows quantitative determination of very low levels of CN⁻. In the present work, effects of pH and water content on the response of 1 to anions were studied to clarify the detailed properties of 1. In aqueous media, 1 reacts selectively with CN⁻regardless of pH and water content, but the reaction is suppressed by a decrease in pH and an increase in water content due to the protonation of CN⁻. In contrast, in pure MeCN, addition of F⁻ also creates a new absorption band, as does CN⁻. This is promoted via a nucleophilic interaction between 1 and F⁻ in a 1:2 stoichiometry (formation of the 1-2F⁻ species). The 1-CN⁻ and 1-2F⁻ species have different photochemical properties; the 1-CN⁻ species is stable upon UV irradiation, while the UV irradiation of the 1-2F⁻ species leads to a decomposition of the spiropyran platform.