Ionization state and ion migration mechanism of room temperature molten dialkylimidazolium fluorohydrogenates

The ionization state of room temperature molten salts, alkylimidazolium fluorohydrogenates (RMIm(HF)(2.3)F: R = alkyl group, M =methyl group), was evaluated from the observed diffusion coefficient and viscosity, using the Stokes-Einstein relation. Assuming that the dissociation degree of the salt is acceptable for representation of the ionic state of the molten salts, the larger the cation size with elongation of the alkyl chain was, the higher the dissociation degree of the salt. Further, we proposed that an idea of the "degree of ordering of cations and anions" was more suitable to represent the ionization state without solvent species. On the basis of this idea, the smaller the cation size of RMIm(HF)(2.3)F salt was, the higher the ordering of the ion, indicating formation of domain particles of aggregated ions as a unit of mobile species such as A(AX)m+ and X(AX)n- for A+ X- salt. It was found that highly ordered particles, with large numbers for m and n, showed a high diffusion coefficient.     

Single crystals of amylose V complexes. II. Crystals with 71 helical configuration

It has been shown that lamellar crystals of amylose V complexes with 7₁ helical configuration can be obtained by using complexing agents larger in cross section than n-butanol. The electron diffraction studies indicated a new unit cell for the unheated lamellar crystals which are composed of molecules with 7₁ helical configuration and hold water molecules on the exterior of the helix. Furthermore, from a throughly dried specimen at 100°C. in vacuo we obtained a pattern which showed only three Debye rings. Its spacings were explained by a two-dimensional hexagonal unit cell having a = b = 14.7 A. proposed by Zaslow. It was also found that when the crystals were dispersed in methanol at room temperature, their electron diffraction pattern was the same as that of the anhydrous amylose V complex of n-butanol.     

Determination of trace elements in a silicon single crystal

Instrumental neutron activation analysis was applied to the determination of trace impurity elements in a silicon single crystal. Impurity concentrations in polysilicon melt were compared with those in a single crystal. Impurity concentrations in artificial quartz were also compared with those in natural quartz. Segregation coefficients in Au, Ir and Sb were determined at different concentrations. The segregation coefficient of an element in a silicon single crystal is constant over a critical concentration, it becomes larger gradually under the critical one, and at last it becomes larger than 1.     

Electron spin resonance study on polymerization of conjugated dienes by homogeneous catalyst derived from n-butyl titanate and triethylaluminum

Polymerizations of butadiene, penta-1,3-diene, and isoprene with n-butyl titanate–triethylaluminum catalyst are examined by ESR measurements on the polymerization state. At Al/Ti molar ratios greater than 2.9 where the conjugated dienes are polymerized, the polymerization system of butadiene always gives an ESR signal with a g value of 1.983 and with a hyperfine structure of about 19 components. This signal does not appear at all, even in the presence of the monomer, at Al/Ti molar ratios smaller than two where butadiene is not polymerized. The absorption intensity of the signal coincides fairly well with the concentration of polymer chain calculated from polymer yield and the molecular weight. On the basis of these facts, the signal is assigned to the growing end of polybutadiene with this catalyst. The structure of the growing end is proposed to have both two substituted π-allyl groups and an alkoxy group in coordination to titanium (III), by analysis of the hyperfine structure. The polymerization system of penta-1,3-diene and that of isoprene respectively, give a new signal with a g value of 1.983, although the signal for the former monomer has a hyperfine structure of 11 components and that for the latter monomer has no hyperfine structure. A structure for the growing end in the polymerization of each of these two monomers analogous to that of the growing end of polybutadiene is proposed.     

Pulse injection analysis of the binding of serum proteins to porous polymer gels modified with formyl groups

Highly porous spherical polymer gels were modified with formyl groups by a modified Friedel-Crafts reaction and the interaction of serum proteins with the modified gels were examined by pulse injection analysis. The introduction of formyl groups into the polymer greatly increases its protein-binding capacity, and the protein bound to the gel is not eluted by washing with acid, alkali or urea solution. The effects of temperature and the percentage of formyl group substitution on the binding capacity indicate that the binding process can be interpreted as initial approach of the protein to the polymer surface, caused by the hydrophobic interaction, followed by formation of a stable Schiff base between the polymer gel and the protein. Theoretical treatment of the elution behaviour of the protein from the polymer-packed column is also examined, with the assumption that there are three kinds of binding site in the polymer gel: surface, macropore and micropore regions. These polymers are shown to be useful for the removal of proteins from biological samples in clinical assays using immobilized enzymes.     

Preparation of yttrium oxysulfide phosphor nanoparticles with infrared-to-green and -blue upconversion emission using an emulsion liquid membrane system

Yttrium oxysulfide upconverting phosphor nanoparticles, doped with Yb as a sensitizer and Er (or Ho, Tm) as an activator, have been prepared via a solid-gas reaction using precursor oxalate particles obtained in an emulsion liquid membrane (ELM, water-in-oil-in-water (W/O/W) emulsion) system. The resulting Y(2)O(2)S:Yb,Er particles, mainly smaller than 50 nm in diameter, demonstrated green upconversion emission under infrared excitation (lambdaex = 980 nm) via a two-photon process. Distinct green and blue upconversion emission were also demonstrated under the same infrared excitation from Y(2)O(2)S:Yb,Ho and Y(2)O(2)S:Yb,Tm nanoparticles, respectively. These upconverting phosphor nanoparticles, together with Y(2)O(3):Yb,Er infrared-to-red upconverting phosphor particles, with different emission under the same infrared excitation may be applied to the luminescent reporter materials for the detection of the targeted analyte in multiplexed assays.     

A fluorescent molecular logic gate with multiply-configurable dual outputs

A simple molecule, L, diethylenetriamine bearing anthracene fragments at both ends, behaves as a fluorescent molecular logic gate with "multiply-configurable dual outputs", capable of demonstrating five different logic functions operated by proton (H+) and transition metal cations (Mn+) as inputs.     

Regioselective synthesis of [60]fullerene eta 5-indenide R3C60- and eta 5-cyclopentadienide R5C60- bearing different R groups

Treatment of a 1,7-diorgano[60]fullerene with Grignard reagents or organocopper reagents affords a [60]fullerene indenide or a [60]fullerene cyclopentadienide regioselectively in good to excellent yields. These reactions gave an insight into the reaction mechanism of the organocopper penta-addition reaction of [60]fullerene, giving [60]fullerene cyclopentadienide in quantitative yield.     

Polymerization of coordinated monomers. XVII. Alternating copolymerization of methyl methacrylate with styrene by boron compounds

By the use of various boron compounds methyl methacrylate and styrene were copolymerized under photoirradiations at ?20°C. The alternately regulating activities of the boron compounds in the copolymerizations were in the following order: boron trichloride > ethylboron dichloride > boron trifluoride > diethylboron chloride ? triethylboron (?0). Boron trichloride and ethylboron dichloride exhibited such high regulating activities that their presence in 1 mol% in the charged methyl methacrylate was sufficient to complete equimolar alternating copolymerization. The alternating copolymerization proceeded in the steady state. The copolymerization rates decreased in the following order: boron trichloride ? ethylboron dichloride > diethylboron chloride ? triethylboron (?0). The cotacticities of methyl methacrylate-centered triads in the resulting copolymers were identical to those prepared with boron trichloride, ethylboron dichloride, and diethylboron chloride. The mechanism of the alternating copolymerization is discussed.     

Polymerization of coordinated monomers. XV. 13C-NMR study on the alternating copolymers of methyl methacrylate with styrene

By the use of various metal halides methyl methacrylate and styrene were copolymerized to produce equimolar alternating sequences and different cotacticities. The ¹³C-NMR spectra of these copolymers were simple in comparison to those of random copolymers because of the fixed monomer sequence which yielded sharply split triplets for carbonyl, methoxy, and quaternary carbons. The relative intensities in these split peaks varied according to the metal halide used. A comparison of the intensities made it possible to obtain clear-cut and quantitative information on the methyl methacrylate-centered triad cotacticity of the copolymers. The spectral assignment with respect to the methoxy carbon was definitely justified by the combined use of partly relaxed Fourier transform and selective decoupling techniques. The spectrum of aromatic C₁ carbon in styrene units also split into three main peaks. From their relative intensities the splitting was attributed to styrene-centered triad cotacticity. The assignment of this carbon was compared with two other assignments made for random copolymers of methyl methacrylate with styrene; they were contradictory, however. Furthermore, an apparent discrepancy was observed between methyl methacrylate-and styrene-centered tactic triads of these alternating copolymers. The origin of this discrepancy suggests a close relationship with the copolymerization mechanism.