Sensitized luminescence properties of dinuclear lanthanide macrocyclic complexes bearing a benzophenone antenna

Dinuclear lanthanide (Ln=Tb³⁺ or Eu³⁺) complexes (Ln₂L2) of two octadentate macrocyclic polyaminopolycarboxylic ligands connected through a benzophenone (BP) moiety (L2) have been synthesized. Sensitized luminescence properties of Ln₂L2 in water have been studied in comparison to those of BP-conjugated mononuclear Ln complexes (LnL1). The luminescence intensity of Tb₂L2 is lower than that of TbL1 because of lower triplet quantum yield of the BP moiety. In contrast, Eu₂L2 shows higher intensity than EuL1. For both Eu complexes, energy level of triplet excited-state BP (³BP*) is only 3 kJ mol⁻¹ higher than that of ⁵D₂ excited-state of Eu³⁺. The ⁵D₂ state formed by a triplet-energy transfer (TET) from ³BP* is therefore deactivated by a back energy transfer (BET) to the ground-state BP, resulting in low luminescence intensity of EuL1. In contrast, within Eu₂L2, TET from ³BP* to ⁵D₀ state of two Eu³⁺ ions is accelerated, thus leading to higher luminescence intensity. Another notable feature of Eu₂L2 is the luminescence quantum yield independent of its concentration. In contrast, for EuL1 system, an intermolecular BET occurs from ⁵D₂ state of Eu³⁺ to the ground-state BP conjugated to another EuL1 complex, resulting in a yield decrease with the concentration increase.     

One‐Step Borylation of 1,3‐Diaryloxybenzenes Towards Efficient Materials for Organic Light‐Emitting Diodes

The development of a one‐step borylation of 1,3‐diaryloxybenzenes, yielding novel boron‐containing polycyclic aromatic compounds, is reported. The resulting boron‐containing compounds possess high singlet‐triplet excitation energies as a result of localized frontier molecular orbitals induced by boron and oxygen. Using these compounds as a host material, we successfully prepared phosphorescent organic light‐emitting diodes exhibiting high efficiency and adequate lifetimes. Moreover, using the present one‐step borylation, we succeeded in the synthesis of an efficient, thermally activated delayed fluorescence emitter and boron‐fused benzo[6]helicene.     

Selective photocatalytic oxidation of alcohols to aldehydes in water by TiO2 partially coated with WO3

Semiconductor TiO₂ particles loaded with WO₃ (WO₃/TiO₂), synthesized by impregnation of tungstic acid followed by calcination, were used for photocatalytic oxidation of alcohols in water with molecular oxygen under irradiation at λ>350 nm. The WO₃/TiO₂ catalysts promote selective oxidation of alcohols to aldehydes and show higher catalytic activity than pure TiO₂. In particular, a catalyst loading 7.6 wt % WO₃ led to higher aldehyde selectivity than previously reported photocatalytic systems. The high aldehyde selectivity arises because subsequent photocatalytic decomposition of the formed aldehyde is suppressed on the catalyst. The TiO₂ surface of the catalyst, which is active for oxidation, is partially coated by the WO₃ layer, which leads to a decrease in the amount of formed aldehyde adsorbed on the TiO₂ surface. This suppresses subsequent decomposition of the aldehyde on the TiO₂ surface and results in high aldehyde selectivity. The WO₃/TiO₂ catalyst can selectively oxidize various aromatic alcohols and is reusable without loss of catalytic activity or selectivity.     

Wide control of proton conductivity in porous coordination polymers

The proton conductivities of the porous coordination polymers M(OH)(bdc-R) [H(2)bdc = 1,4-benzenedicarboxylic acid; M = Al, Fe; R = H, NH(2), OH, (COOH)(2)] were investigated under humid conditions. Good correlations among pK(a), proton conductivity, and activation energy were observed. Fe(OH)(bdc-(COOH)(2)), having carboxy group and the lowest pK(a), showed the highest proton conductivity and the lowest activation energy in this system. This is the first example in which proton conductivity has been widely controlled by substitution of ligand functional groups in an isostructural series.     

MOF-on-MOF heteroepitaxy: perfectly oriented [Zn2(ndc)2(dabco)]n grown on [Cu2(ndc)2(dabco)]n thin films

We report the successful heteroepitaxial growth of perfectly oriented hybrid MOF thin films. By employing step-by-step liquid-phase epitaxy (LPE), [Zn(2)(ndc)(2)(dabco)](n) was grown on [Cu(2)(ndc)(2)(dabco)](n), thus demonstrating that the MOF-on-MOF deposition scheme developed for powdered microcrystalline MOF materials can also be applied in connection with LPE for MOF thin films or multilayers. The deposition was monitored by surface plasmon resonance (SPR) spectroscopy, the resulting MOF heterostructures were characterized using IR spectroscopy and different types of X-ray diffraction (XRD)-based techniques. The results suggest that the LPE method is a promising way to fabricate and grow MOF heterostructures, and also demonstrates the potential of [Cu(2)(ndc)(2)(dabco)](n) MOF thin films as substrates for the LPE-based growth of different MOFs on top.     

High-performance liquid chromatography with photodiode array detection for determination of nobiletin content in the brain and serum of mice administrated the natural compound

We recently demonstrated that nobiletin, a citrus flavonoid, exhibits anti-dementia action in animals. However, no determination methods for the content of nobiletin with beneficial action in the brain of nobiletin-administered animals have been developed, nor has its pharmacokinetics been revealed completely. Here, we established the high-performance liquid chromatography/photodiode array detection method for nobiletin determination using Bond Elut C18 SPE cartridges for extraction, where the calibration curve was linear over 0.025-10 ng, with coefficient of variation of less than 6.76%. This method enabled us to determine pharmacokinetic parameters of nobiletin given intraperitoneally or per os in the brain of mice.     

Enantioselective/anion-selective incorporation of tris(ethylenediamine) complexes into 2D coordination spaces between tripalladium(II) supramolecular layers with D-penicillaminate

The formation of a cocrystallized coordination compound, [Pd(3)(D-pen)(3)](2)·[M(en)(3)](ClO(4))(3) (D-H(2)pen = D-penicillamine; M = Co(III) or Rh(III)), from [Pd(3)(D-pen)(3)] and [M(en)(3)](ClO(4))(3) is reported. In this compound, only the Δ-configurational [M(en)(3)](3+) cations were incorporated when its racemic (Δ/Λ) isomer was employed. Besides this enantioselective incorporation of complex cations, this compound was found to show the selective incorporation of ClO(4)(-) as the anion species.     

Nuclear quantum effect on the hydrogen-bonded structure of guanine�Ccytosine pair

The structure of Watson?CCrick type guanine?Ccytosine (G?CC) base pair has been studied by classical hybrid Monte Carlo (HMC) and quantum path integral hybrid Monte Carlo (PIHMC) simulations on the semiempirical PM6 potential energy surface. For the three NH?X hydrogen-bonded moieties, the intramolecular NH bonds are found systematically longer while the H?X distance shorter in the PIHMC simulation than in the HMC simulation. We found that the hydrogen bonded length N?X correlates with the H?X distance, but not with the NH distance. A correlation is also between the neighboring hydrogen bonds in the G?CC base pair.     

Size-controlled deposition of Ag nanoparticles on alumina with the assistance of a photo-induced chromic reaction, and study of their catalytic properties

This paper describes a promising method to synthesize supported metal catalysts based on a photochromic reaction. Highly dispersed Ag nanoparticles (NPs) with a mean diameter of ca. 10 nm stabilized by 3-mercaptopropionic acid (3-MPA) were prepared as a colloidal precursor solution. The zeta electric potential was found to be negatively charged in the region of pH higher than 5 due to the presence of dissociated carboxylate ions (-COO(-)), which led to electric repulsion between Ag NPs and kept the solution in a highly dispersed colloidal state. In the presence of photochromic molecules, trans-2-hydroxychalcone, the photo-irradiation gradually decreased the electric charge on the nanoparticles owing to the formation of flavylium cations, which induced the assembly of Ag NPs. Such photo-induced assembly-dispersion control of Ag NPs enables size selective deposition on a catalyst support, which is controlled by varying the photo-irradiation time.     

Synthesis and properties of polyimide ionomers containing sulfoalkoxy and fluorenyl groups

A series of sulfopropylated and sulfobutylated polyimide copolymers containing fluorenyl groups, SPI‐4, were synthesized to investigate the effect of alkyl side chains on the properties (stability, mechanical strength, water uptake, and proton conductivity) of the polymimide electrolyte membranes. SPI‐4 showed much better hydrolytic stability (in 10% MeOH aq at 100 °C) than the main chain sulfonated polyimide, SPI‐1. Tough, flexible, and ductile membranes were obtained from these copolymers. At high relative humidity all the SPI‐4 membranes showed high mechanical properties (>34 MPa of the maximum stress) and proton conductivity (>0.1 Scm^?1). These properties are comparable to or even better than those of the perfluorosulfonic acid ionomer (Nafion 112). The new polyimide ionomers have proved to be a possible candidate as polymer electrolyte membrane for PEFCs and DMFCs. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4439–4445, 2005