Method to determine quadruple points of a two-component system containing a simple hydrate phase and behavior of the system near these points

A method for determining quadruple points of a two-component system containing a simple hydrate phase is proposed. This method utilizes the quasi-static change of the system along three-phase equilibrium lines and was proved to be able to determine the quadruple points as accurately as the conventional method. By using this method, even though some preparation is necessary, a quadruple point can be determined in just a single experimental run. The behavior of the system near the quadruple points was also examined experimentally, for both the quasi-static and the irreversible change cases. At the quadruple points, the temperature and pressure of the system were kept constant for a while, as at the triple point of water. In both cases, the representative point of the state of the system passed through the quadruple point on a p–T diagram.     

Rigid-body dynamics in the isothermal-isobaric ensemble: a test on the accuracy and computational efficiency

We have developed a time-reversible rigid-body (rRB) molecular dynamics algorithm in the isothermal-isobaric (NPT) ensemble. The algorithm is an extension of rigid-body dynamics [Matubayasi and Nakahara, J Chem Phys 1999, 110, 3291] to the NPT ensemble on the basis of non-Hamiltonian statistical mechanics [Martyna, G. J. et al., J Chem Phys 1994, 101, 4177]. A series of MD simulations of water as well as fully hydrated lipid bilayer systems have been undertaken to investigate the accuracy and efficiency of the algorithm. The rRB algorithm was shown to be superior to the state-of-the-art constraint-dynamics algorithm SHAKE/RATTLE/ROLL, with respect to computational efficiency. However, it was revealed that both algorithms produced accurate trajectories of molecules in the NPT as well as NVT ensembles, as long as a reasonably short time step was used. A couple of multiple time-step (MTS) integration schemes were also examined. The advantage of the rRB algorithm for computational efficiency increased when the MD simulation was carried out using MTS on parallel processing computer systems; total computer time for MTS-MD of a lipid bilayer using 64 processors was reduced by about 40% using rRB instead of SHAKE/RATTLE/ROLL.     

Synthesis of methylpyridine derivatives. XXXV. Reaction of acetylpyridine with phosphoryl chloride to give alkynylpyridine

Reaction of 3-acetyl-4,6-dimethyl-2-(1H)pyridone ( 9a ) with phosphoryl chloride gives 2-chloro-3-ethynyl-4,6-dimethylpyridine ( 10a ). 3-Acetyl-4-hydroxy-6-methyl-2(1H)pyridone (14a) and 3-acetyl-2,6-dimethyl-4-(1H)-pyridone (21) undergoes similar reaction to give the corresponding ethynyl (16 and 23) and chlorovinyl (15 and 22) pyridines, respectively. The chlorination of 3-acetylpyridine and pyrimidine derivatives is further described.     

Low temperature properties of acetonitrile confined in MCM-41

The effect of confinement on the phase changes and dynamics of acetonitrile in mesoporous MCM-41 was studied by use of adsorption, FT-IR, DSC, and quasi-elastic neutron scattering (QENS) measurements. Acetonitrile molecules in a monolayer interact strongly with surface hydroxyls to be registered and perturb the triple bond in the C[triple bond]N group. Adsorbed molecules above the monolayer through to the central part of the cylindrical pores are capillary condensed molecules (cc-acetonitrile), but they do not show the hysteresis loop in adsorption-desorption isotherms, i.e., second order capillary condensation. FT-IR measurements indicated that the condensed phase is very similar to the bulk liquid. The cc-acetonitrile freezes at temperatures that depend on the pore size of the MCM-41 down to 29.1 A (C14), below which it is not frozen. In addition, phase changes between alpha-type and beta-type acetonitriles were observed below the melting points. Application of the Gibbs-Thomson equation, assuming the unfrozen layer thickness to be 0.7 nm, gave the interface free energy differences between the interfaces, i.e., Deltagamma(l/alpha) = 22.4 mJ m(-2) for the liquid/pore surface (ps) and alpha-type/ps, and Deltagamma(alpha/beta) = 3.17 mJ m(-2) for alpha-type/ps and beta-type/ps, respectively. QENS experiments substantiate the differing behaviors of monolayer acetonitrile and cc-acetonitrile. The monolayer acetonitrile molecules are anchored so as not to translate. The two Lorentzian analysis of QENS spectra for cc-acetonitriles showed translational motion but markedly slowed. However, the activation energy for cc-acetonitrile in MCM-41 (C18) is 7.0 kJ mol(-1) compared to the bulk value of 12.7 kJ mol(-1). The relaxation times for tumbling rotational diffusion of cc-acetonitrile are similar to bulk values.     

Synthesis of methylpyridine derivatives—XXXIIIChem. Pharm. Bull.25, 203 (1977).: Phosphonylation and chlorination of methylpyridine and 3-nitro-methylpyridine derivatives

Novel phosphonylation of the active Me group of pyridine derivatives is described.Reaction of 2 (and 4) -methylpyridine (3 and 5) with PCl₅ in POCl₃ gave 2 (and 4) -trichloromethylpyridine (4 and 6). Similarly, reaction of 4 (and 6) methyl-3-nitropyridine (7 and 9) afforded the corresponding trichloromethyl derivative (8 and 10). However, the similar reaction of 2-methyl-3-nitropyridine (11) gave dichloro-(3-nitro-2-pyridyl)-methylphosphonic dichloride (12).Mechanisms of the formation of these products are discussed.     

Fluorous reverse-phase silica gel-supported Lewis acids as recyclable catalysts in water

Fluorous reverse-phase silica gel (FRPSG)-supported Lewis acids which have fluorous ligands acted as effective catalysts of Baeyer-Villiger and Diels-Alder reactions in water. Direct esterification of carboxylic acid with alcohol in organic media was also catalyzed. The FRPSG-supported Lewis acids could be recycled by simple filtration after the reaction.     

Synthesis and crystal structure of ionic multicomponent complex: ([Cr(I)(PhH)(2)].+))(2)[Co(II)TPP(C(60)(CN)(2))]-[C(60)(CN)(2)](.-).3(o-C(6)H(4)Cl(2)) containing C(60)(CN)(2).- radical anion and sigma-bonded diamagnetic Co(II)TPP(C(60)(CN)(2)) -anion

The ionic multicomponent complex complex: ([Cr(I)(PhH)(2)].+))(2)[Co(II)TPP(C(60)(CN)(2))]-[C(60)(CN)(2)](.-).3(o-C(6)H(4)Cl(2)) (Co(II)TPP: cobalt (II) tetraphenylporphyrin; Cr(PhH)(2): bis(benzene)chromium; o-C(6)H(4)Cl(2): o-dichlorobenzene) containing CoTPP(C(60)(CN)(2)- anion and C(60)(CN)(2).- radical anion was obtained. The complex has the cage structure with channels, which accommodate Cr(I)(PhH)(2)(.+) and o-C(6)H(4)Cl(2) molecules. For the first time the sigma-bonding of Co(II)TPP to the fullerene radical anion with the essentially shortened Co.C(C(60)(CN)(2)) contact of 2.282 A is observed. The sigma-bonding results in the diamagnetism of Co(II)TPP(C(60)(CN)(2))(-) anion. The nonbonded C(60)(CN)(2)(.-) radical anion retains both the C(2)(v)symmetry and the shape of the molecule. The length of the C(triple bond)N bonds is 1.141 and 1.152 A.     

Robust and simple interface for microchip electrophoresis-mass spectrometry

A robust and simple interface for microchip electrophoresis-mass spectrometry (MCE-MS) was developed using a spray nozzle connected to the exit of the separation channel of the microchip. The spray nozzle was attached to the microchip using a polyether ether ketone screw without adhesive, thus allowing easy replaced. Sample injection and electrophoretic separation was performed by control of the voltage only. The analysis of a few basic drugs was performed using the optimized MCE-MS system. The separation was improved by using a high-viscosity separation buffer and a spray nozzle with a small bore size. This system was also applied to the separation of peptides and protein-trypsin digests. Sample adsorption was minimized by adding acetonitrile to the separation buffer when using a quartz microchip.     

Chain-growth polycondensation for well-defined aramide. Synthesis of unprecedented block copolymer containing aramide with low polydispersity

Poly(p-benzamide) with a defined molecular weight and a low polydispersity and a block copolymer containing this well-defined aramide was synthesized. Phenyl 4-aminobenzoate, which would yield poly(p-benzamide), did not polymerize under the conditions of chain-growth polycondensation. However, phenyl 4-(4-octyloxybenzylamino)benzoate (1b) polymerized at room temperature in the presence of base and phenyl 4-nitrobenzoate (2) as an initiator in a chain-growth polycondensation manner to give well-defined aromatic polyamides having the 4-octyloxybenzyl groups as a protecting group on nitrogen in an amide. It was confirmed by a model reaction that deprotection of this protecting group proceeded completely with trifluoroacetic acid (TFA) without breaking the amide linkage. The utility of this approach to poly(p-benzamide) with a low polydispersity was demonstrated by the synthesis of block copolymers. Thus, phenyl 4-(octylamino)benzoate (1a) polymerized in the presence of 2 and base, followed by addition of 1b and base to the reaction mixture of the prepolymer to yield the block copolymer of 1a and 1b with a controlled molecular weight and a low polydispersity. The block copolymer was treated with TFA, resulting in a soluble block copolymer of poly(N-octyl-p-benzamide) and poly(p-benzamide). The SEM images of the supramolecular assemblies of the block copolymer showed mum-sized bundles and aggregates of flake structures.