Photografting of vinyl polymers onto ultrafine inorganic particles: Photopolymerization of vinyl monomers initiated by AZO groups introduced onto these surfaces

The photografting of polymers onto ultrafine inorganic particles, such as silica and titanium oxide, initiated by azo groups introduced onto these surfaces was investigated. The introduction of azo groups onto the particles was achieved by the reaction of 4,4′-azobis(4-cyanopentanoic acid) with surface isocyanate groups, which were introduced by the treatment with tolylene 2,4-diisocyanate. It was found that the photopolymerization of vinyl monomers, such as methyl methacrylate (MMA), styrene, and N-vinylcarbazole, is initiated by ultrafine particles having azo groups. The corresponding polymers were effectively grafted onto these surfaces through the propagation of the polymer from the surface radicals formed by the photodecomposition of the azo groups: e.g., the percentage of grafting of PMMA and polystyrene onto silica was reached to 112 and 176%, respectively. The percentage of grafting onto silica in the graft polymerization initiated by photodecomposition of surface azo groups was much larger than that initiated by thermal decomposition. Polymer-grafted ultrafine particles thus obtained gave a stable colloidal dispersion in good solvents for the grafted chain. © 1994 John Wiley & Sons, Inc.     

Peptides-XXXXVI: Studies in the synthesis of an analogue of hen egg white lysozyme

The previously synthesised (1–37), (38–75), (76–93), (94–104), (105–117) and (118–129) fragments of the analogue were combined making extensive use of the DCCI/HONSu method. The final coupling involved the (1–75) and (76–129) sub-fragments. Aggregation of the latter fragment caused problems in purification by routine gel filtration methods employing Enzacryl K2 or Sephadex LH60. The fully protected (1–129) product was partially purified by washing, then deprotectcd and purified by gel filtration and ion exchange chromatography. Satisfactory removal of the acetamidomethyl group used for cysteine protection could not be achieved.     

Micropore-free surface-activated carbon for the analysis of polychlorinated dibenzo-p-dioxins-dibenzofurans and non-ortho-substituted polychlorinated biphenyls in environmental samples

2,3,7,8-Substituted polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/Fs) and non-ortho-substituted polychlorinated biphenyls (PCBs) account for almost all of the total toxic equivalents (TEQ) in environmental samples. Activated carbon columns are used to fractionate the samples for GC-MS analysis or bioassay. Micropore-free surface-activated carbon is highly selective for PCDD/Fs and non-ortho-PCBs and can improve the conventional activated carbon column clean-up. Along with sulfuric acid-coated diatomaceous earth columns, micropore-free surface-activated carbon provides a rapid, robust, and high-throughput sample preparation method for PCDD/Fs and non-ortho-PCBs analysis.     

Efficient synthesis of 2-modified 1alpha,25-dihydroxy-19-norvitamin D3 with Julia olefination: high potency in induction of differentiation on HL-60 cells

Six novel 2-substituted analogues of 1alpha,25-dihydroxy-19-norvitamin D(3), 6a,b-8a,b, were efficiently synthesized utilizing (-)-quinic acid as the A-ring precursor. The C2-modified A-rings were prepared as 4-alkylated (3R,5R)-3,5-dihydroxycyclohexanones 12-15 from (-)-quinic acid based on radical allylation at the C4 position of methyl (-)-quinicate. The new type of the CD-ring coupling partner 23 was synthesized from 25-hydroxy Grundmann's ketone 19 to apply to the modified Julia olefination to construct a diene unit between the A-ring and the CD-ring. The coupling yields, including a deprotection step, were 47-62%. After the separation of the diastereomers based on C2 stereochemistry, the structure (2alpha or 2beta) was determined by (1)H NMR experiments and compared to DeLuca's 2-methyl- and 2-ethyl-1alpha,25-dihydroxy-19-norvitamin D(3). Thus, the synthesized 2alpha-(3-hydroxypropyl)-1alpha,25-dihydroxy-19-norvitamin D(3) (8a) showed almost the same potency in binding to the bovine thymus vitamin D receptor (VDR) as the natural hormone 1, while its beta-isomer 8b had only a 3% affinity. Both 2alpha-allyl- and 2alpha-propyl-1alpha,25-dihydroxy-19-norvitamin D(3) (6a and 7a) and their 2beta-analogues (6b and 7b) possessed a weak affinity for the VDR. The strong VDR ligand 8a was ca. 36-fold more potent in induction of HL-60 cell differentiation than 1, and interestingly, even the weaker ligand 8b showed a 6.7-fold higher potency in the cell differentiation activity than that of 1.     

Novel quinazoline ring synthesis by cycloaddition of N-arylketenimines with N,N-disubstituted cyanamides

The reaction of N-aryl-substituted ketenimines with N,N-disubstituted cyanamides or (MeS)2C=N-CN under high pressure afforded 4-(N,N-disubstituted amino) or 4-(MeS)2C=N-substituted quinazoline derivatives, respectively. These products were formed by [4+2] cycloaddition between the aza-diene moieties of the N-arylsubstituted ketenimines and cyano groups. A 4-(unsubstituted amino)quinazoline derivative was synthesized by hydrolysis of the latter product.     

Microanalysis of sulphide, sulphite, sulphate and thiosulphate by thin-layer chromatography and ring-colorimetry

Clean and rapid analytical separations of microgram quantities of S(2-), SO(3)(2-), SO(4)(2-) and S(2)O(3)(2-) ions have been accomplished by ascending thin-layer chromatography on microcrystalline cellulose with n-propanol-1M ammonia-acetone (30: 20: 2) as the solvent system. The separated species have been determined by ring-colorimetry.     

One‐Shot Double Elimination Process: A Practical and Concise Protocol for Diaryl Acetylenes

A variety of diaryl acetylenes were obtained in good yields when lithium hexamethyldisilazide was added to a solution of arylmethyl sulfone, aryl aldehyde, and chlorodiethylphosphate in THF. In this one‐shot process, a number of transformations such as aldol reaction, phosphorylation of aldolate, and double elimination of the resulting β‐substituted sulfone proceeded successively to afford the desired acetylenes. The one‐shot process was accelerated by the substitution of halogen atoms on the phenyl groups, and unsymmetrically substituted diaryl acetylenes were obtained without contamination of the dehalogenated products. Diaryl acetylenes with other substituents such as CF₃, ethoxycarbonyl, dimethylamino, TMS‐acetylene groups, as well as pyridinyl and thienyl moieties were also accessible with this method. However, methoxy‐substituted compounds were obtained in moderate yields under the same conditions, but the yields were increased when lithium diisopropylamide was used instead.     

Proton-block strategy for the synthesis of oligodeoxynucleotides without base protection,capping reaction,and P-N bond cleavage reaction

A new N-unprotected phosphoramidite method called the "proton-block" approach was developed for the chemical synthesis of oligodeoxynucleotides based on the hitherto simplest and rational principle of acid-base reactions. This concept involves protection of the nucleobases of deoxycytidine and deoxyadenosine with "protons" to convert them to unreactive protonated bases during condensation by use of promoters having pK(a) values lower than 2.8. This strategy was applied to the synthesis of d[CpT] and d[ApT] to check the side reactions associated with the base residues. In this "proton-block" method, 5-nitrobenzimidazolium triflate (NBT) was found to be the best promoter, and THF was superior to CH(3)CN as the solvent so that the concomitant detritylation due to the inherent acidity of the promoter could be greatly suppressed. Application of this strategy to the solid-phase synthesis gave d[CpT], d[ApT], d[ApA], d[CpC], and d[GpT] as almost single peaks in HPLC analysis. Similarly, d[ApApApT] and d[CpCpCpT] were successfully synthesized without significant side reactions. Finally, d[CpCpCpCpCpCpT] and d[ApApApApApApT] were obtained as the main products. In the case of a longer oligomer, d[CpApGpTpCpApGpTpCpApGpT], a mixed solvent of CH(3)CN-N-methylpyrrolidone (1:1, v/v) was superior to THF so that the desired oligodeoxynucleotide could be isolated in a satisfactory yield. These results suggest that DNA synthesis can be carried out simply by using the protonated bases at the oligomer level not only without base protection but also without the capping reaction and the posttreatment of branched chains with MeOH-benzimidazolium triflate that previously was requisite. It is concluded that most of the reactions and solvent effects involved in this strategy can be explained in terms of simple acid-base reactions. Some problems associated with the previous posttreatment are also discussed with our own results.