Spacer effect of appended moieties for molecular recognition in doubly-sodium anthranilate modified γ-cyclodextrin

-Cyclodextrin with two sodium anthranilate moieties (1) has been prepared as a sensor for detecting organic compounds including terpenoids and steroids. Compound1 shows a pure monomer fluorescence whose intensity is increased or decreased upon addition of the guest species examined. In this system, the sodium anthranilate moieties act either as a spacer, which enables the cyclodextrin to form a 1:1 host-guest complex by narrowing the -cyclodextrin cavity, or as a hydrophobic cap.1 recognizes steroids with much higher sensitivity than terpenoids, in which the appended moieties act as a hydrophobic cap for terpenoids and a spacer for steroids, respectively.     

Dansyl-Modified γ-Cyclodextrin as a fluorescent sensor for molecular recognition

The crystal structure of thiamine iodide sesquihydrate has been determined by X-ray diffraction methods as a host-guest model for coenzyme-substrate interactions. The asymmetric unit contains two chemical units. Both the thiamine molecules A and B, which are crystallographically independent, assume the usualF conformation and have a disordered hydroxyethyl side chain. An iodide anion (or a water molecule) bridges the pyrimidine and thiazolium rings of molecule A (or B) by forming a hydrogen bond with the amino group and an electrostatic contact with the thiazolium ring to stabilize the molecular conformation. In the crystal the thiamine molecules self-associate to form a pipe-like polymeric structure, in which four thiamine hosts surround an iodide guest and hold it through C(2)-H...I hydrogen bonds and thiazolium...I electrostatic interactions. Crystal data: C₁₂H₁₇N₄OS⁺·I^– · 1.5 H₂O, monoclinic,P2₁/c, a=12.585(2), b=25.303(5), c=12.030(2) Å, =115.15(1)°,V=3468(1) ų,Z=8,D _c=1.606 g cm^–3,R=0.045 for 3328 observed reflections. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP. 82156 (13 pages).     

Rh-doped SrTiO3 photocatalyst electrode showing cathodic photocurrent for water splitting under visible-light irradiation

A Rh-doped SrTiO(3) (SrTiO(3):Rh) photocatalyst electrode that was readily prepared by pasting SrTiO(3):Rh powder onto a transparent indium tin oxide electrode gave a cathodic photocurrent under visible-light irradiation (λ > 420 nm), indicating that the SrTiO(3):Rh photocatalyst electrode possessed p-type semiconductor character. The cathodic photocurrent increased with an increase in the amount of doped Rh up to 7 atom %. The incident-photon-to-current efficiency at 420 nm was 0.18% under an applied potential of -0.7 V vs Ag/AgCl for the SrTiO(3):Rh(7 atom %) photocatalyst electrode. The photocurrent was confirmed to be due to water splitting by analyzing the evolved H(2) and O(2). The water splitting proceeded with the application of an external bias smaller than 1.23 V versus a Pt counter electrode under visible-light irradiation and also using a solar simulator, suggesting that solar energy conversion should be possible with the present photoelectrochemical water splitting.     

Thermo-responsive polymer brushes as intelligent biointerfaces: preparation via ATRP and characterization

PIPAAm-brush grafted glass substrates with various graft densities and chain lengths were prepared via surface-initiated ATRP. Temperature-dependent physicochemical properties of the surfaces were characterized by means of ATR/FT-IR spectroscopy, XPS, AFM, and contact angle measurements. ATRP conditions influence the amount of grafted PIPAAm and the surface wettability and roughness of the substrate. Fibronectin adsorption and EC adhesion increased with decreasing density of PIPAAm brushes. EC adhesion was diminished with increasing PIPAAm graft length. Thus, the preparation of PIPAAm brush surface with various graft densities and chain lengths using the surface-initiated ATRP is an effective method for modulating thermo-responsive properties of surfaces.     

Polymeric phosphonium salts as a novel class of cationic biocides. V. Synthesis and antibacterial activity of polyesters releasing phosphonium biocides

Polyesters were prepared which retained phosphonium biocides as counter ions of sodium sulfonate moieties incorporated into the polymers, and surface antibacterial activity of the polyester films against Staphylococcus aureus and Escherichia coli was explored. These films exhibited a high surface antibacterial activity against S. aureus and E. coli, particularly against S. aureus, and the activity was affected by the structure and the compositional ratio of the phosphonium salts. Amount of the released phosphonium salts was very small, so that liberation of the phosphonium biocides can be expected to occur over a long period. Morphological changes of the cells of S. aureus and E. coli in contact with the polyester films were evaluated by scanning electron microscopy. It was found that the surface antibacterial activity of the polyester films was rather bacteriostatic than bactericidal as evidenced by no morphological changes of the bacterial cells in contact with the phosphonium biocides © 1993 John Wiley & Sons, Inc.     

Time-resolved infrared spectroscopy of K3Ta3B2O12 photocatalysts for water splitting

Electrons photoexcited in K(3)Ta(3)B(2)O(12), an efficient photocatalyst for the water-splitting reaction driven by ultraviolet light, were observed using time-resolved IR absorption spectroscopy with microsecond resolution. When the catalyst was irradiated with 266 nm light pulses, a structureless absorption appeared at 3000-1500 cm(-1). The absorption was assigned to the optical transition of electrons that were band gap-excited and then trapped in mid-gap states. The absorbance decayed with a time delay because of the electron-hole recombination. The rate of recombination in an argon atmosphere was sensitive to the composition of the starting material used in the catalyst preparation. The electron decay was accelerated by exposing the catalyst to water vapor. The degree of acceleration was qualitatively correlated with the H(2) production rate observed during steady-state light irradiation.     

Synthesis and structure of new water-soluble and stable tantalum compound: ammonium tetralactatodiperoxo-mu-oxo-ditantalate(V)

The stable water-soluble tantalum complex with lactic acid (ammonium tetralactatodiperoxo-mu-oxo-ditantalate(V)), (NH4)4[Ta2(C3H4O3)4(O2)2O].3H2O, was prepared in the crystalline form. According to the single-crystal X-ray diffraction data, this compound forms a monoclinic cell with a = 13.85(2) A, b = 9.06(1) A, c = 12.32(2) A, and beta = 116.30 degrees , space group C2 (No. 2), and has Z = 2 molecules per unit cell. The solid-state 13C NMR data and low flack parameter are consistent with the determined structure. Appearance of the same vibration modes in Raman and IR spectra supports the choice of the space group without inversion symmetry. The solution of the tantalum complex was successfully applied for the synthesis of two photocatalytic materials, NaTaO3 and Sr2Ta2O7.     

Synthetic Studies on Sialoglycoconjugates 40: Stereocontrolled Synthesis of Sialyl Lewis X Epitope and Its Ceramide Derivative

Abstract

Stereocontrolled synthesis of sialyl Le^x epitope and its ceramide derivative with regard to the introduction of galactose or β-D-galactosyl ceramide into the terminal N-acetylglucosamine residue of sialyl Le^x determinant is described. Königs-Knorr condensation of 2-(trimethylsilyl)ethyl 2, 4, 6-tri-O-benzyl-β-D-galactopyranoside (4) with 3, 4, 6-tri-O-acetyl-2-deoxy-2-phthalimido-D-glucopyranosyl bromide (5) gave the desired β-glycoside 6, which was converted into 2-(trimethylsilyl)ethyl O-(2-acetamido-4, 6-O-benzylidene-2-deoxy-β-D-glucopyranosyl)-(l→3)-2, 4, 6-tri-O-benzyl-β-D-galactopyranoside (8) via removal of the phthaloyl and O-acetyl groups, followed by N-acetylation and 4, 6-O-benzylidenation. Glycosylation of 8 with methyl 2, 3, 4-tri-O-benzyl-1-thio-β-L-fucopyranoside (9) gave the α-glycoside (10), which was transformed by reductive ring-opening of the benzyliderie acetal into the acceptor (11). Dimethyl(methylthio)sulfonium triflate (DMTST)-promoted coupling of 11 with methyl O-(methyl 5-acetamido-4, 7, 8, 9-tetra-O-acetyl-3, 5-dideoxy-D-glycero-α-D-galacto-2-nonulopyranosylonate)-(2→3)-2, 4, 6-tri-O-benzoyl-l-thio-β-D-galactopyra-noside (12) afforded the desired pentasaccharide (13), which was converted into the α-trichloroacetimidate 16 via reductive removal of the benzyl groups, then O-acetylation, removal of the 2-(trimethyIsilyl)ethyl group and treatment with trichloroacetonitrile. Condensation of 16 with (2S, 3R, 4E)-2-azido-3-O-benzoyl-4-octadecene-l, 3-diol (18) gave the β-glycoside 19, which was transformed into the title compound 21, via reduction of the azido group, coupling with octadecanoic acid, O-deacylation and hydrolysis of the methyl ester group. On the other hand, O-deacylation of 13 and subsequent hydrolysis of the methyl ester group gave the pentasaccharide epitope 17.     

Microchip reversed-phase liquid chromatography with packed column and electrochemical flow cell using polystyrene/poly(dimethylsiloxane)

A microchip pressure-driven liquid chromatography (LC) with a packed column and an electrochemical flow cell has been developed by using polystyrene (PS) and poly(dimethylsiloxane) (PDMS). The cylindrical separation column with packed octadecyl silica particles was fabricated in the PS substrate. The three electrode system (working, reference, and counter electrode) for amperometric detection was fabricated onto the PS substrate, using the Au deposition, photolithography, and chemical etching. The detector flow cell was formed by sealing the electrode system with a PDMS chip containing a channel. In this flow cell, the effect of working electrode width (in the direction of flow) on chromatographic parameters, such as peak width and peak resolution were studied in electrode width ranging 50-5,000 microm. The effect of electrode width on sensitivity (current intensity, current density, and S/N ratio) was also examined. The sensitivity was discussed by simulating the concentration profile generated around the working electrode. The effects of the column packing size and the column size on the separation efficiency were examined. In this study, a good separation of three catechins was successfully achieved and the detection limits for (+)-catechin, epicatechin, and epigallocatechin gallate were 350, 450, and 160 nM, respectively.     

Highly Isospecific Polymerization of Silyl‐Protected ω‐Alkenols Using an [OSSO]‐Type Bis(phenolato) Dichloro Zirconium(IV) Precatalyst

The coordination polymerization of silyl‐protected ω‐alkenols such as ω‐alken‐α‐oxytriisopropylsilanes 1 provides poly(ω‐alkenyl‐α‐oxytriisopropylsilalne)s with a highly isospecific microstructure ([mmmm] > 95%) when a combination of [OSSO]‐type bis(phenolato) dichloro zirconium(IV) complex 2 and dried methylaluminoxane is used as the precatalyst and activator, respectively. The resulting siloxy‐substituted polymers could be efficiently transformed into the corresponding functionalized polyolefins, which contained up to 90% acetyl groups and ≈7% hydroxy groups in the terminal side chains.