We investigated a thermo-sensitive polymer, poly(N-isopropylacrylamide) (PNIPAAm), which is the basis of an HPLC stationary phase. We prepared a PNIPAAm terminally-modified surface. In this study, we investigated the effect of PNIPAAm on the surface of a stationary phase on separation based on changes of the retention time with the temperature step gradient. As the temperature changed the surface property of the stationary phase switched from hydrophilic to hydrophobic. The retention on the polymer-modified stationary phase remarkably changed upon changing the temperature. Using a column packed with PNIPAAm-modified silica, the separation of steroids was carried out by changing the temperature. With increasing temperature, an increased interaction between solutes and PNIPAAm-grafted surfaces of the stationary phases was observed. A temperature-dependent resolution of steroids was achieved using only water as a mobile phase. The PNIPAAm-modified surface of the stationary phase exhibited temperature-controlled hydrophilic-hydrophobic changes. The drastic and reversible surface hydrophilic-hydrophobic property alteration for PNIPAAm terminally-grafted surfaces should be due to rapid changes in the polymer hydration state around the polymer's transition temperature. A solvent gradient elution-like effect could be achieved with a single mobile phase by programmed temperature changes during chromatographic runs. This system should be highly useful to control the function and property of the stationary phase for HPLC only by changing the temperature with an aqueous solvent. 相似文献
Interaction forces between two gold surfaces with adsorbed poly(amidoamine) (PAMAM) dendrimers (generations G3.0 and G5.0) have been investigated using colloidal probe atomic force microscopy (AFM). In the absence of dendrimers or at their low concentrations, an attractive force derived from the van der Waals interaction was observed. On the other hand, this attractive interaction changed to repulsion with increasing dendrimer concentration. The origin of the repulsion can be attributed to either an electric double layer interaction or a steric effect of the adsorbed dendrimers, depending on the concentration of dendrimer. The steric hindrance was also influenced by the generation of the dendrimer; the force-detectable distance in the presence of PAMAM G5.0 dendrimer was slightly longer than that in the presence of G3.0 dendrimer. In order to estimate the occupied area of each dendrimer adsorbed on gold, quartz crystal microbalance (QCM) measurement was also carried out. 相似文献
The stable water-soluble tantalum complex with lactic acid (ammonium tetralactatodiperoxo-mu-oxo-ditantalate(V)), (NH4)4[Ta2(C3H4O3)4(O2)2O].3H2O, was prepared in the crystalline form. According to the single-crystal X-ray diffraction data, this compound forms a monoclinic cell with a = 13.85(2) A, b = 9.06(1) A, c = 12.32(2) A, and beta = 116.30 degrees , space group C2 (No. 2), and has Z = 2 molecules per unit cell. The solid-state 13C NMR data and low flack parameter are consistent with the determined structure. Appearance of the same vibration modes in Raman and IR spectra supports the choice of the space group without inversion symmetry. The solution of the tantalum complex was successfully applied for the synthesis of two photocatalytic materials, NaTaO3 and Sr2Ta2O7. 相似文献
We propose detecting a fragment ion (Ph2As+) using counter-flow introduction atmospheric pressure chemical ionization ion trap mass spectrometry for sensitive air monitoring of chemical warfare vomiting agents diphenylchloroarsine (DA) and diphenylcyanoarsine (DC). The liquid sample containing of DA, DC, and bis(diphenylarsine)oxide (BDPAO) was heated in a dry air line, and the generated vapor was mixed into the humidified air flowing through the sampling line of a mass spectrometer. Humidity effect on the air monitoring was investigated by varying the humidity of the analyzed air sample. Evidence of the in-line conversion of DA and DC to diphenylarsine hydroxide (DPAH) and then BDPAO was obtained by comparing the chronograms of various ions from the beginning of heating. Multiple-stage mass spectrometry revealed that the protonated molecule (MH+) of DA, DC, DPAH, and BDPAO could produce Ph2As+ through their in-source fragmentation. Among the signals of the ions that were investigated, the Ph2As+ signal was the most intense and increased to reach a plateau with the increased air humidity, whereas the MH+ signal of DA decreased. It was suggested that DA and DC were converted in-line into BDPAO, which was a major source of Ph2As+.
The European Physical Journal E - We consider a microscopic field theoretical approach for interacting active nematic particles. With only steric interactions the self-propulsion strength in such... 相似文献
The reaction of m-fluorophenylsulfone anions with dialkylboranes, followed by alkaline hydroperoxide oxidation, yields alcohols in high yields. Optimization of the process, scope and limitation, and application to the synthesis of one of the C14-C35 building blocks of E7389, a right half analogue of halichondrin B, are reported. 相似文献
Dinuclear Ru(III) complexes, [Ru(III)(acac)(2)(dabe)Ru(III)(acac)(2)] (acacH = acetylacetone; dabeH(2) = 1, 2-diacetyl-1,2-dibenzoylethane) and [Ru(III)(acac)(2)(tbet)Ru(III)(acac)(2)] (tbetH(2) = 1,1,2,2-tetrabenzoylethane) were synthesized by reacting [Ru(acac)(2)(CH(3)CN)(2)]PF(6) with dabeH(2) and tbetH(2) respectively, in toluene. The X-ray structural analysis of a meso-type dinuclear Ru(III) complex, ΔΛ-[Ru(III)(acac)(2)(dabe)Ru(III)(acac)(2)], showed that the bridging part became chiral due to the orthogonal twisting of two non-symmetrical β-diketonato moieties. To confirm this conclusion, the complex was resolved chromatographically to provide a pair of optical antipodes. Such chirality in the bridging part was not generated for [Ru(III)(acac)(2)(tbet)Ru(III)(acac)(2)], because the β-diketonato moieties in tbet(2-) are symmetrical. 相似文献
Self-assembly behaviors of a series of systems (G1, G2, and G3) possessing same organic building blocks based on a substituted anthracene have been investigated in decalin. G2 and G3 are dominated by head-to-tail (ht) and head-to-head (hh) type dimers of G1, respectively. G1 gives a thermoresponsive gel that behaves ideally, showing frequency-independent elastic and viscous moduli. Interestingly, G2 produces a thixotropic gel that shows the signature of structural relaxation, signifying the dynamic nature of the system. In contrast, G3 remains fluidlike. As investigated by scanning electron microscopy (SEM), in the assembly process of G2, first disklike nanoaggregates are formed, and in the second step these aggregates interact to construct the densely packed secondary assembly. A transition from secondary assembly to primary assembly under shear initiates the mechanoresponsive destruction of the gel. In the self-assembly process, G1 propagates in a one-dimensional fashion, whereas G2 and G3 can propagate in a two-dimensionional fashion. The same side orientation of the substituents in G3 facilitates the formation of a compact closed-shell-type structure, which results in the generation of isolated nanocrystals. The long-range weak interaction together with the capability of propagating in two dimensions is found to be essential for the construction of such a mechanoresponsive assembly. C(60) and C(70) could be incorporated successfully in G2 assembly to develop mechanoresponsive fullerene assemblies. The presence of fullerenes not only enhances the elastic properties of G2 but also intensifies the thixotropy. C(70) appears to be a superior guest in terms of property enhancement due to its better size fitting with the concave-shaped host. 相似文献