Tissue gadolinium deposition in renally impaired rats exposed to different gadolinium-based MRI contrast agents: Evaluation with inductively coupled plasma mass spectrometry (ICP-MS)

ObjectivesTo quantify tissue gadolinium (Gd) deposition in renally impaired rats exposed to Gd-EOB-DTPA and other Gd-based MRI contrast agents by means of inductively coupled plasma mass spectrometry (ICP-MS), and to compare the differences in distribution among major organs as possible triggers for nephrogenic systemic fibrosis (NSF).MethodsA total of 15 renally impaired rats were injected with Gd-EOB-DTPA, Gd-DTPA-BMA and Gd-HP-DO3A. Gd contents of skin, liver, kidney, lung, heart, spleen, diaphragm and femoral muscle were measured by inductively coupled plasma mass spectrometry (ICP-MS). Histological assessment was also conducted.ResultsTissue Gd deposition in all organs was significantly higher (P = 0.005 ~ 0.009) in the Gd-DTPA-BMA group than in the Gd-HP-DO3A and Gd-EOB-DTPA groups. In the Gd-DTPA-BMA group, Gd was predominantly deposited in kidney (1306 ± 605.7 μg/g), followed by skin, liver, lung, spleen, femoral muscle, diaphragm and heart. Comparing Gd-HP-DO3A and Gd-EOB-DTPA groups, Gd depositions in the kidney, liver and lung were significantly lower (P = 0.009 ~ 0.011) in the Gd-EOB-DTPA group than in the Gd-HP-DO3A group although no significant differences were seen for any other organs.ConclusionsGd-EOB-DTPA is a stable and safe Gd-based contrast agent (GBCA) showing lower Gd deposition in major organs in renally impaired rats, compared with other GBCAs. This fact suggests that the risk of NSF onset would be low in the use of Gd-EOB-DTPA.     

Subject Index to Volume 33

This paper reports the investigation of microdroplet sample preparation for phosphate, strontium and rubidium using X-ray fluorescence. Sample filter papers were prepared by drying under several different conditions and the front and the back sides of the filter papers were measured using X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD), and electron-probe microanalysis (EPMA).

It was reported by Murata and Murokado that the elemental distribution difference between the front and the back sides after drying the filter paper led to erratic data.¹ It has been found that the intensity difference between the front and the back sides was due to the condensation of the material of interest on the surface of the filter papers and the amount of the condensed material on the filter paper was related to the temperature at which the filter paper was dried.

Optimum temperature at which a filter paper is dried and an appropriate internal standard are essential to reproducible measurements.     

Thermo-optic properties of B2O3 doped Li2O-Al2O3-SiO2 glass-ceramics

Reduction in the temperature coefficient of the optical path length, dS/dT of Li₂O-Al₂O₃-SiO₂ glass-ceramics with near-zero thermal expansion coefficient was attempted using control of the temperature coefficient of electronic polarizability, ?, and the thermal expansion coefficient, α. The dS/dT value of 2.6 mol% B₂O₃-doped glass-ceramic was 12.5  × 10⁻⁶/°C, which was 0.9 ×  10⁻⁶/°C smaller than that of B₂O₃-free glass-ceramic. On the other hand, reduction in dS/dT through B₂O₃ doping was not confirmed in precursor glasses. Results showed that reduction in dS/dT of the glass-ceramic through B₂O₃ doping is caused by the reduction in ?. The reduction in ? from B₂O₃ doping was probably attributable to numerical reduction in non-bridging oxide ions with larger ? value by the concentration of boron ions in the residual glass phase. In addition, application of hydrostatic pressure during crystallization was effective to inhibit precipitation of β-spodumene solid solution, which thereby decreases dS/dT. The dS/dT value of B₂O₃-doped glass-ceramic crystallized under 196 MPa was 11.7 ×  10⁻⁶/°C. That value was slightly larger than that of silica glass. The α value of this glass-ceramic was smaller than that of silica glass.     

Preparation of cellulosic soft and composite materials using ionic liquid media and ion gels

Cellulose - Ionic liquids (ILs) are powerful media for the modification and functionalization of cellulose. This review article discusses the preparation of cellulosic soft and composite materials...     

Construction of a High‐Mannose‐Type Glycan Library by a Renewed Top‐Down Chemo‐Enzymatic Approach

A comprehensive method for the construction of a high‐mannose‐type glycan library by systematic chemo‐enzymatic trimming of a single Man9‐based precursor was developed. It consists of the chemical synthesis of a non‐natural tridecasaccharide precursor, the orthogonal demasking of the non‐reducing ends, and trimming by glycosidases, which enabled a comprehensive synthesis of high‐mannose‐type glycans in their mono‐ or non‐glucosylated forms. It employed glucose, isopropylidene, and N‐acetylglucosamine groups for blocking the A‐, B‐, and C‐arms, respectively. After systematic trimming of the precursor, thirty‐seven high‐mannose‐type glycans were obtained. The power of the methodology was demonstrated by the enzymatic activity of human recombinant N‐acetylglucosaminyltransferase‐I toward M7–M3 glycans, clarifying the substrate specificity in the context of high‐mannose‐type glycans.     

Preparation of thermo- and redox-responsive branched polymers composed of three-armed oligo(ethylene glycol)

We herein report the preparation of thermo- and redox-responsive branched polymers by the condensation reaction of three-armed oligo(ethylene glycol) (trisOEG) and cystamine (CA). The prepared branched polymers exhibited a soluble–insoluble transition at a lower critical solution temperature (LCST) and formed coacervate droplets through a liquid–liquid phase separation process. We then demonstrated control of the LCSTs of the branched polymers by varying the feed ratio of CA and the surrounding salt concentration close to body temperature. In addition, the trisOEG-cys _x polymer formed coacervate droplets above the LCST, in which hydrophobic molecules were condensed. The redox response of the branched polymers was also investigated. Interestingly, the branched polymers degraded to low-molecular-weight materials (i.e., trisOEG) in the presence of dithiothereitol as a reducing agent through cleavage of the disulfide bond of CA. This facile preparation of branched polymers is expected to be valuable in the context of functional biomedical materials and modifiers for materials surfaces, such as the bases for drug delivery carriers and separation materials. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2623–2629     

Anionic ring-opening polymerization behavior of trans-cyclohexene carbonate using metal tert-butoxides: Construction of living anionic ring-opening polymerization by lithium tert-butoxide

Anionic ring-opening polymerization (ROP) behavior of trans-cyclohexene carbonate (CHC) using metal alkoxides as initiators was investigated. As a result, lithium tert-butoxide-initiated ROP of CHC with a high-monomer concentration (10 M) at low temperature (−15 to −10°C) proceeded to afford a poly(trans-cyclohexene carbonate) (PCHC) without undesired side reactions such as mainly backbiting. The suppression of side reactions enables the control of the molecular weight (M_n = 2400–6100) of PCHC with low molar-mass dispersity values (M_w/M_n = 1.16–1.22). Furthermore, by increasing the feed ratio of the monomer to the initiator, the molecular weight increases proportionally, indicating a controllable polymerization. The results of a matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis, a kinetic study, and a chain extension experiment suggested a living nature of this ROP using lithium tert-butoxide.     

Effects of a lysophosphatidylcholine and a phosphatidylcholine on the morphology of taurocholic acid-based mixed micelles as determined by small-angle X-ray scattering

We previously showed that Caco-2 cell absorption of β-carotene from taurocholic acid (TA)-based mixed micelles differed depending on the composition of the micelles. In this study, the shapes and sizes of TA-based mixed micelles, that is, mixed micelles of TA, 1-oleoyl-rac-glycerol (MG), oleic acid (OLA), and either 1-palmitoyl-sn-glycero-3-phosphocholine (MPPC; i.e., a lysophospholipid) or 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC; i.e., a phospholipid) (60:3:1:0.75–12) were determined by using small-angle X-ray scattering (SAXS). We found that increasing the ratio of MPPC in mixed micelles of TA, MG, OLA, and MPPC was responsible for the previously observed enhanced β-carotene absorption by Caco-2 cells and changed the micelle shape from core–shell spherical to core–shell ellipsoidal. In contrast, increasing the ratio of POPC in mixed micelles of TA, MG, OLA, and POPC was responsible for the suppressed β-carotene absorption by the cells, changed the micelle shape from core–shell spherical to core–shell ellipsoidal to core–shell cylindrical, and caused a rapid increase in micelle volume. These results will be useful for understanding the mechanisms that mediate β-carotene absorption by cells and for developing technologies to improve the intestinal absorption of lipophilic components of drugs and nutrients.     

Heavily Doped and Highly Conductive Hierarchical Nanoporous Graphene for Electrochemical Hydrogen Production

Heavy chemical doping and high electrical conductivity are two key factors for metal‐free graphene electrocatalysts to realize superior catalytic performance toward hydrogen evolution. However, heavy chemical doping usually leads to the reduction of electrical conductivity because the catalytically active dopants give rise to additional electron scattering and hence increased electrical resistance. A hierarchical nanoporous graphene, which is comprised of heavily chemical doped domains and a highly conductive pure graphene substrate, is reported. The hierarchical nanoporous graphene can host a remarkably high concentration of N and S dopants up to 9.0 at % without sacrificing the excellent electrical conductivity of graphene. The combination of heavy chemical doping and high conductivity results in high catalytic activity toward electrochemical hydrogen production. This study has an important implication in developing multi‐functional electrocatalysts by 3D nanoarchitecture design.