A directly fused tetrameric porphyrin sheet and its anomalous electronic properties that arise from the planar cyclooctatetraene core

Oxidation of a directly meso-meso linked cyclic porphyrin tetramer 2 gave a porphyrin sheet 3. The symmetric square structure of 3 is indicated by its simple 1H NMR spectrum that exhibits only two signals for the porphyrin beta-protons. The absorption spectrum of 3 displays characteristic Soret-like broad bands and weak Q-bands, and its magnetic circular dichroism (MCD) spectrum exhibits a negative Faraday A term at the 762 nm band as a rare case, indicating the absorption as a transition from a nondegenerate level to a degenerate level. A slightly longer S1-state (1.1 ps) and smaller TPA cross section (2750 GM) than a tetrameric linear porphyrin tape also indicate its unique electronic properties. The porphyrin sheet 3 forms stable 1:2 complexes with guest molecules G1 and G2, whose 1H NMR spectra exhibit remarkable downfield shifts for the guest protons that are located just above the cyclooctatetraene (COT) core of 3, whereas the imidazolyl protons bound to the zinc(II) porphyrin local cores are observed at slightly upfield positions. These results have been qualitatively accounted for in terms of the presence of a strong paratropic ring current around the COT core that propagates through the whole pi-electronic network of 3, hence competing with and cancelling the weak diatropic ring currents of the local zinc(II) porphyrins. This explanation was supported by DFT calculation performed at the GIAO-B3LYP/6-31G level, which indicated large positive NICS values within the COT core and small NICS values within the local zinc(II) porphyrins.     

Mixed La-Li heterobimetallic complexes for tertiary nitroaldol resolution

A kinetic resolution of tertiary nitroaldols derived from simple ketones is described. Mixed BINOL/biphenol La-Li heterobimetallic complexes gave the best selectivity in retro-nitroaldol reactions of racemic tertiary nitroaldols. By using a mixture of La-Li3-(1a)3 complex (LLB 2a) and La-Li3-(1b)3 (LLB* 2b) complex in a ratio of 2/1, chiral tertiary nitroaldols were obtained in 80-97% ee and 30-47% recovery yield.     

Probing the structural requirements of peptoids that inhibit HDM2-p53 interactions

Many cellular processes are controlled by protein-protein interactions, and selective inhibition of these interactions could lead to the development of new therapies for several diseases. In the area of cancer, overexpression of the protein, human double minute 2 (HDM2), which binds to and inactivates the protein p53, has been linked to tumor aggressiveness and drug resistance. In general, inhibition of protein-protein interactions with synthetic molecules is challenging and currently remains a largely uncharted area for drug development. One strategy to create inhibitors of protein-protein interactions is to recreate the three-dimensional arrangement of side chains that are involved in the binding of one protein to another, using a nonnatural scaffold as the attachment point for the side chains. In this study, we used oligomeric peptoids as the scaffold to begin to develop a general strategy in which we could rationally design synthetic molecules that can be optimized for inhibition of protein-protein interactions. Structural information on the HDM2-p53 complex was used to design our first class of peptoid inhibitors, and we provide here, in detail, the strategy to modify peptoids with the appropriate side chains that are effective inhibitors of HDM2-p53 binding. While we initially tried to develop rigid, helical peptoids as HDM2 binders, the best inhibitors were surprisingly peptoids that lacked any helix-promoting groups. These results indicate that starting with rigid peptoid scaffolds may not always be optimal to develop new inhibitors.     

Toward million-fold sensitivity enhancement by sweeping in capillary electrophoresis combined with thermal lens microscopic detection using an interface chip

This paper reports a thermal lens microscope (TLM) detection coupled with capillary electrophoresis (CE) by using an interface chip (IFChip) to achieve highly sensitive detection with high reproducibility. Fused silica capillaries with an inner diameter of 50 microm were directly connected to a microchannel on the IFChip. In comparison with an on-capillary detection method in CE-TLM, ca. 10-fold improvements in the reproducibility for peak height were obtained by using IFChips. The detection limit of an azo dye was estimated to be 3.6 x 10(-7)M (100 ppb), which was above 100-times lower than that of conventional absorbance detection. Toward further improvement of the detectability for nonfluorescent compounds, on-line sample preconcentration by sweeping was applied to the CE-TLM using the IFChip. Due to the sweeping effect, 3900000-fold increase in the sensitivity was successfully achieved.     

Intravenous administration of mesenchymal stem cells exerts therapeutic effects on parkinsonian model of rats: Focusing on neuroprotective effects of stromal cell-derived factor-1α

Background

Junctional adhesion molecule-A (JAM-A) is an adhesive protein expressed in various cell types. JAM-A localizes to the tight junctions between contacting endothelial and epithelial cells, where it contributes to cell-cell adhesion and to the control of paracellular permeability.

Results

So far, the expression pattern of JAM-A has not been described in detail for the different cell types of the adult brain. Here we show that a subset of proliferating cells in the adult mouse brain express JAM-A. We further clarify that these cells belong to the lineage of NG2-glia cells. Although these mitotic NG2-glia cells express JAM-A, the protein never shows a polarized subcellular distribution. Also non-mitotic NG2-glia cells express JAM-A in a non-polarized pattern on their surface.

Conclusions

Our data show that JAM-A is a novel surface marker for NG2-glia cells of the adult brain.     

ArF laser photolytic deposition and thermal modification of an ultrafine chlorohydrocarbon

MW ArF laser irradiation of gaseous cis-dichloroethene results in fast decomposition of this compound and in deposition of solid ultrafine Cl- and H-containing carbonaceous powder which is of interest due to its sub-microscopic structure and possible reactive modification of the C-Cl bonds. The product was characterized by electron microscopy, and FTIR and Raman spectra and it was revealed that HCl, H₂, and C/H fragments are lost and graphitic features are adopted upon heating to 700°C.     

Formation of microstructured silicon surfaces by electrochemical etching using colloidal crystal as mask

Silicon disk arrays and silicon pillar arrays with a close-packed configuration having an ordered periodicity were fabricated by the electrochemical etching of a silicon substrate through colloidal crystals used as a mask. The colloidal crystals were directly prepared by the self-assembly of polystyrene particles on a silicon substrate. The transfer of a two-dimensional hexagonal array of colloidal crystals to the silicon substrate could be achieved by the selective electrochemical etching of the exposed silicon surfaces, which were located in interspaces among adjacent particles. The diameter of the tip of the silicon pillars could be controlled easily by changing the anodization conditions, such as current density and period of electrochemical etching.     

Comparison between theoretical model and experimental calibrations and its inference for track formation in bubble detectors

Calculations on the formation of a linear track of a heavy ion in bubble detector have been carried out based on a theoretical model considering the minimum energy (including bubble surface energy, internal energy, evaporation energy, expansion energy, kinetic energy and viscous energy) required during the formation of a critical bubble at the cost of the ionization energy of the heavy ion. The calculated minimum energy is 8.99 keV for dichlorodifluoromethane (R-12) at 25 °C. The results of calculations have been combined with those of calibrations of bubble detectors with heavy ions at accelerator. The threshold (1.51±0.04) MeV mg^-1 cm² is obtained in the calibration with heavy ions for the above liquid and temperature. It shows that the distance over which the heavy ion traverses and transfers energy to the superheated liquid to produce a critical bubble is 4.67 times the radius of the seed bubble. The radius of the cylinder along which the heavy ion deposits energy to form a seed bubble is about 5.2 nm. This dimension indicates that the process of track formation in bubble detectors is consistent with the model of thermal spike.