A stable Schrock-type hafnium-silylene complex

The first stable hafnium-silylene complex, (eta-C5H4Et)2(PMe3)Hf=Si(SiMetBu2)2 (6) was obtained in the form of the phosphine adduct as red crystals by the coupling reaction of 1,1-dilithiosilane (1) with 0.9 equiv of (eta-C5H4Et)2HfCl2 in dry toluene at -50 degrees C, followed by treatment with an excess of PMe3 at -50 degrees C. In the 29Si NMR spectrum of 6, the signal from the silylene ligand is shifted greatly downfield at 295.4 ppm, with a JSiP coupling constant of 15.0 Hz. X-ray crystallographic analysis of 6 revealed that the Si-Hf bond length (2.6515(9) A) is about 5% shorter than typical Si-Hf single bonds, obviously indicating the double-bond character between the silicon and hafnium atoms. The compound 6 was found to be a Schrock-type silylene complex, a conclusion that was supported by the natural population analysis (NPA) charge distribution for the model complex, (eta-C5H4Et)2(PMe3)Hf=Si(SiMe3)2 (8), showing a negative charge on the silicon atom (-0.34).     

Direct crystallographic observation of a coordinatively unsaturated transition-metal complex in situ generated within a self-assembled cage

In situ crystallographic observation of an extremely labile coordinatively unsaturated transition-metal complex, Cp'Mn(CO)2 (Cp' = methylcyclopentadienyl), was achieved by generating and trapping it within the confined cavity of a self-assembled cage in the crystalline state at a low temperature. The labile target Cp'Mn(CO)2 was formed by the photodissociation of the CO ligand from stable Cp'Mn(CO)3, which was accommodated within the cavity of the coordination cage. Being trapped in the cage at a low temperature, Cp'Mn(CO)2 showed sufficient stability to be analyzed by X-ray crystallography. The diffraction study revealed that the 16-electron unsaturated Mn complex adopted a pyramidal geometry rather than a planar geometry.     

Alternating copolymerization of fluoroalkenes with carbon monoxide

The palladium-catalyzed alternating copolymerization of fluoroalkenes, represented as CH(2)=CH-CH(2)-C(n)F(2n+1), with CO was performed using (R,S)-BINAPHOS (2e) as a ligand. The CH(2)-C(n)F(2n+1) group is the most electronegative substituent ever reported for the copolymerization (Taft's sigma value of 0.90 for CH(2)CF(3)). The copolymer obtained from CH(2)=CH-CH(2)-C(8)F(17) (1a) existed as a mixture of polyspiroketal and polyketone, while that from CH(2)=CH-CH(2)-C(4)F(9) (1b) was a pure polyspiroketal, as was revealed by infrared and (13)C-CP/MAS NMR spectroscopies. The terminal structure of the polymer from 1b was confirmed by MALDI-TOF MS spectrometry. Detailed NMR studies suggested that the much higher reactivity with (R,S)-BINAPHOS (2e) than that with the conventional ligand DPPP (2a) can be attributed to the unique 1,2-insertion of the fluoroalkene into acylpalladium species. The existence of an electronegative substituent on the alpha-carbon of the palladium center is successfully avoided in the 1,2-insertion mechanism.     

On-chip syringe pumps for picoliter-scale liquid manipulation

On-chip microsyringes are developed by integrating parallel micro actuators and a microfluidic chip. Sliders of an Electrostatically Controlled Linear Inchworm Actuator (ECLIA) are applied to manipulate microsyringes in the nanometer range, which allows liquid control on the picoliter scale. ECLIA drives sliders in parallel with high accuracy and a large stroke. The requirements for syringe performance, such as parallel and precise liquid control, can be satisfied by the above features of ECLIA. A total volume of a few microL is manipulated at a flow rate of 19-27 pL s(-1) by the stepwise motion of ECLIA sliders in a fluidic channel. Microsyringes integrated into the driving mechanism are a key component of Micro Total Analysis Systems (microTAS) due to the possibility of on-chip integration. In addition, the proposed approach has a significant implication in MEMS in that the electrostatic micro actuator performs a physical task that affects the outside structure.     

Quasi-one-dimensional molecular magnets based on derivatives of (fluorobenzyl)pyridinium with the [M(mnt)2] monoanion (M = Ni, Pd or Pt; mnt2- = maleonitriledithiolate): syntheses, crystal structures and magnetic properties

The syntheses, structural characterizations and magnetic behaviors of three new complexes, 1-(3',4',5'-trifluorobenzyl)pyridinium [M(mnt)2]- [M = Ni (1), Pd (2) or Pt (3)], are reported. These complexes are isomorphous and their prominent structural character is that the [M(mnt)2]- anions form columnar stacks, in which the dimerization was observed. Complexes 2 and 3 are diamagnetic, while 1 possesses an energy gap of 2474 K. For crystal 4, 1-(4'-fluorobenzyl)pyridinium [Ni(mnt)2] (its structure and magnetic susceptibility were briefly reported earlier), the magnetic behavior can be divided into two regimes, namely, weakly ferromagnetic coupling above 93 K and strongly antiferromagnetic coupling below 93 K. A transition occurs at 93 K which switches the magnetic exchange nature from ferromagnetic to antiferromagnetic. A sharp thermal abnormality with lambda-shape, associated with the transition, appears from its heat capacity measurement to indicate that the transition is first order. The temperature dependences of the superlattice diffractions revealed the existence of the pretransitional phenomena up to at least 140 K. The unusual magnetic behavior of 4, such as the origin of the ferromagnetic interaction in the high temperature phase and what causes the spin transition, are discussed further.     

Enhancement of saccharin removal from aqueous solution by activated carbon adsorption with ultrasonic treatment

This study investigates the use of ultrasonication as a pretreatment process and its effect on the adsorption characteristics of saccharin onto activated carbon (AC). Ultrasonic decomposition of saccharin was performed at a frequency of 500 kHz under argon and O2/N2 (20/80 vol%) atmospheres. Adsorption was carried out using a commercial activated carbon. The behavior of total organic carbon (TOC) during ultrasonication was investigated. Saccharin removal after 180 min of ultrasonication under Ar and O2/N2 atmospheres are 38% and 26%, respectively, while the amount of saccharin removed by activated carbon adsorption without US pretreatment is 40% after 16 h. After 16 h of AC adsorption with 180 min of ultrasonic pretreatment under Ar and O2/N2 atmospheres, both removal ratios increased to 75%. These results indicated that the pretreatment of sonication under O2/N2 leads to the increase in the amount of saccharin adsorbed on AC. On the other hand, the TOC removal by decomposition by ultrasound is not more than 5% in both Ar and O2/N2 atmospheres after 180 min ultrasonication. However, the TOC removal increased to 54% and 69% after 16 h of adsorption of saccharin pretreated by ultrasonication for 180 min under Ar and O2/N2 atmospheres, respectively. About 13% and 16% TOC removal in Ar and in O2/N2, respectively, were achieved due to adsorption of the by-products. It is considered that the improvement in TOC removal is also brought about by the formation of the by-products that were adsorbed onto AC.     

Formation of ZnO nanodot arrays along the step edges on R-face sapphire by metalorganic chemical vapor deposition

Dot array formation of zinc oxide (ZnO) along the linear single steps was demonstrated on sapphire substrates under near atmosphere pressure by metalorganic chemical vapor deposition (MOCVD). Sapphire substrates of , (0 0 0 1) and planes (A-plane, C-plane and R-plane, respectively) were employed as templates for manufacturing the nanostructures. For highly controlling dot array formation the substrates were prepared by annealing at 1000 °C for 3 h in air after chemical treatment. The step arrays were easily prepared on C-plane and R-plane sapphire. The linearly aligned ZnO nanodot arrays were formed on R-plane sapphire along the step edges over several ten micrometers. The result can be attributed to the smaller number of dangling bonds on R-plane than on A-plane and C-plane, enhancing the surface diffusion length. Sapphire can be a good template for manipulating II–VI semiconductor on it to form nanostructures even at near atmosphere pressure by a conventional MOCVD.     

Shortcut synthesis of beta-cyclomannin from beta-cyclodextrin

Beta-cyclomannin, a cyclic oligosaccharide consisting of seven alpha-D-mannosides connected together by the (1-->4) glycoside linkage, has been efficiently synthesized by the OsO4 oxidation of heptakis(2,3-didehydroxy)-beta-cyclodextrin which was prepared from beta-cyclodextrin by a five-step transformation. The novel cyclooligosaccharide not only showed water solubility high enough to meet the requirement for drug formulation but also demonstrated strong binding ability toward guest molecules. [reaction: see text]     

New development of ‘sono-functional’ molecule: Binding to DNA by sonication

‘Sono-functional’ molecule 1 was prepared and its binding properties to DNA under ultrasonic irradiation were studied by UV spectra. As a result, it was shown that the binding of 1 to DNA was enhanced by ultrasound. Being compared with its precursor 2, it is clear that terminal thiol groups of 1 play an important role in specific binding to DNA.     

Energy-dependent enhancement of the electron-coupling spectrum of the underdoped Bi2Sr2CaCu2O(8+δ) superconductor

We have determined the electron-coupling spectrum of superconducting Bi2Sr2CaCu2O(8+δ) from high-resolution angle-resolved photoemission spectra by two deconvolution-free robust methods. As hole concentration decreases, the coupling spectral weight at low energies ?15 meV shows a twofold and nearly band-independent enhancement, while that around ～65 meV increases moderately, and that in ?130 meV decreases leading to a crossover of dominant coupling excitation between them. Our results suggest the competition among multiple screening effects, and provide important clues to the source of sufficiently strong low-energy coupling, λ(LE)≈1, in an underdoped system.