Structure activity relationship of bergenin,p-hydroxybenzoyl bergenin, 11-O-galloylbergenin as potent antioxidant and urease inhibitor isolated from Bergenia ligulata

Ethanol extract of the aerial parts of Bergenia ligulata was subjected to solvent–solvent separation followed by various chromatographic techniques that lead to isolation of bergenine (1), p-hydroxybenzoyl bergenin (2), 11-O-galloylbergenin (3) and methyl gallate (4) as major constituents. Ethyl acetate fraction showed a dose-dependent urease inhibitory pattern with IC₅₀ value of 54μg/mL. Structures of compounds 1 and 3 were established by XRD and 2, 4 by NMR. All these compounds were subjected to DPPH scavenging activity, reducing power assay and urease inhibitory activity. The EC₅₀ 7.45 ± 0.2 μg/mL and 5.39 ± 0.28 μg/mL values in terms of antioxidant and reducing power, respectively, were less for 3. Compounds 1–3 showed moderate to significant urease inhibitory potential with IC₅₀ 57.1 ± 0.7, IC₅₀ 48.4 ± 0.3 and 38.6 ± 1.5. Antioxidant activities and urease inhibitory potential were investigated and compound 3 was found to be the most active.     

Size Reduction of Bulk Alumina for Mass Production of Fluorescent Nanoalumina by Fungus <Emphasis Type="Italic">Humicola</Emphasis> sp.

In recent years, nanomaterials have made their way into hundreds of biomedical, life-sciences and technological applications. One such nanomaterial of extreme importance is nanoalumina (Al₂O₃ nanoparticles). This nanomaterial is an epitome of diversity with applications exhibited in the fields of catalysis, cosmetics, theranostics, energy generation, biosensors, drug-delivery, tumor-regression, etc. However, problems persist in terms of biocompatibility, cost-effectiveness, reproducibility and mass-production of nanoalumina by the presently existent physical, chemical and biological methodologies. Herein, we for the first time are presenting a top-down biofabrication method by which size reduction of commercial bulk alumina/aluminum oxide (5 µm) into nanoalumina (5–25 nm) is carried out by a thermophilic fungus Humicola sp. within 96 h of reaction at just 50 °C. The so-formed nanoalumina is highly stable, water dispersible, fluorescent and natural protein capped; characterization engaged standard techniques. These nanoparticles exhibit anti-bacterial properties against Gram-positive Bacillus subtilis strain and may serve as broad spectrum bactericidal agents. We believe that our novel top-down approach may be extensively used in the facile, inexpensive, eco-friendly and reliable fabrication of abundant quantities of nanomaterials of different chemical compositions, sizes and shapes with better control and predictability over the properties as derived from their substrates. The mechanistic aspect of said protocol is underway.     

On Solutions of Some Non-Linear Differential Equations Arising in Newtonian and Non-Newtonian Fluids

Some steady as well as unsteady solutions of the equations of motion for an incompressible Newtonian and non-Newtonian (second-grade) fluids are obtained by applying different methods including the Lie symmetry group method. The flows considered are axially symmetric with the swirling motion, and the governing equations for second-grade fluid flow have been modeled. Expressions for streamlines, velocity and vorticity components are constructed explicitly in each case. Exact analytical solutions in second-grade fluid are obtained and compared with the corresponding viscous solutions.     

A centrally cracked thin circular disk, Part I: 3D Elastic–plastic finite element analysis

A full field solution, based on small deformation, three-dimensional elastic–plastic finite element analysis of the centrally cracked thin disk under mode I loading has been performed. The solution for the stresses under small-scale yielding and lo!cally fully plastic state has been compared with the HRR plane stress solution. At the outside of the 3D zone, within a distance of rσ_o/J=18, HRR dominance is maintained in the presence of a significant amount of compressive stress along the crack flanks. Ahead of this region, the HRR field overestimate the stresses. These results demonstrate a completely reversed state of stress in the near crack front compared to that in the plane strain case. The combined effect of geometry and finite thickness of the specimen on elastic–plastic crack tip stress field has been explored. To the best of our knowledge, such an attempt in the published literature has not been made yet. For the qualitative assessment of the results some of the field parameters have been compared to the available experimental results of K, gives a fair estimate of the crack opening stress near the crack front at a distance of order 10⁻² in. On the basis of this analysis, the Linear Elastic Fracture Mechanics approach has been adopted in analyzing the fatigue crack extension experiments performed in the disk (Part II).     

Development and validation of stability-indicating HPLC method for the simultaneous determination of paracetamol, tizanidine, and diclofenac in pharmaceuticals and human serum

A method is described for the simultaneous determination of paracetamol, tizanidine, and diclofenac in mixtures. The method was based on HPLC separation of the three drugs followed by UV detection at 254 nm. The separation was carried out on a Hypersil ODS, C18 (250 x 4.6 mm id, 10 microm particle size) column using the mobile phase aqueous 0.2% ammonium carbonate-methanol (60 + 40, v/v) at a flow rate of 1 mL/min. The linear regression analysis data were used for the regression curve in the range of 170-10 000 ng/mL for paracetamol, 120-10 000 ng/mL for tizanidine, and 20-10 000 ng/mL for diclofenac. No chromatographic interference from tablet excipients was found. In order to check the selectivity of the proposed method, degradation studies were carried out using hydrolysis (acid, basic, and neutral), thermolysis, and oxidation. The developed method, after being validated in terms of precision, robustness, recovery, LOD, and LOQ, was successively applied to the analysis of pharmaceutical formulations and human serum.     

粘滑混合边界条件下平面边界前的Stokes流动

对具有粘滑混合边界条件的平面边界,建立一个Stokes流动的一般性定理,利用双调和函数A与调和函数B,表示了3维Stokes流动的速度场和压力场.关于无滑动平面边界前Stokes流动的早期定理,成为该一般性定理的一个特例.进一步地,从一般性定理导出了一个推论,根据该Stokes流函数,给出了粘滑边界条件时刚性平面轴对称Stokes流动问题的解,得到了流体作用在边界上的牵引力和扭矩公式.给出了一个说明性的例子.     

Development of an efficient protein phosphatase-based colorimetric test for okadaic acid detection

Okadaic acid (OA), responsible for gastrointestinal problems, inhibits protein phosphatase 2A (PP2A). Therefore, the inhibition exerted by the toxin on PP2A could be used to detect the presence of OA in aqueous solution and in shellfish sample.In this work, two commercial PP2As (from ZEU Immunotec and Millipore) and one produced by molecular engineering (from GTP Technology) were tested. Enzymes were used in solution and also immobilized within a polymeric gel. In solution, best performances were obtained using PP2A purchased from ZEU Immunotec (Spain). OA was detected in aqueous solution in concentration as low as 0.0124 μg L⁻¹ using the enzyme from ZEU Immunotec whereas the detection limits were 0.47 μg L⁻¹ and 0.123 μg L⁻¹ with PP2As from Millipore and GTP Technology, respectively. Considering that the immobilization step contributes to stabilize the PP2A activity, enzymes were entrapped within a photopolymer and an agarose gel. These different polymeric matrices were optimized, tested and compared. Agarose gel seems to be a good alternative to the photopolymer largely used in our group. For instance, the IC₅₀ value obtained with the test based on PP2A from ZEU Immunotec immobilized within an agarose gel was 1.98 μg L⁻¹. This value was 1.8-fold lower than those obtained with the photopolymer test using the same enzyme. The proposed test is sensitive, fast and does not require expensive equipment. To evaluate the efficiency of the assay, PP inhibition tests based on PP2A from ZEU Immunotec in solution or immobilized within a gel were used for OA detection in contaminated shellfish.     

Role of added counterions in the micellar growth of bisquaternary ammonium halide surfactant (14-s-14): 1H NMR and viscometric studies

The change in the morphology of a series of dicationic gemini surfactants C(14)H(29)(CH(3))(2)N(+)-(CH(2))(s)-N(+)(CH(3))(2)C(14)H(29), 2Br(-) (14-s-14; s=4-6) on their interaction with inorganic (KBr, KNO(3), KSCN) and organic salts (NaBenz, NaSal) have been thoroughly investigated by means of (1)H NMR spectral analysis and the results are well supported by viscosity measurements. The presence of salt counterions results in structural transition (spherical to nonspherical) of gemini micelles in aqueous solution. With an increase in salt concentration all the three gemini surfactants showed changes in their aggregate morphology. This change is dependent on the nature and size of the added counterion. The effect of inorganic counterions on the micellar growth is observed to follow the Hofmeister series (Br(-) < NO(3)(-) < SCN(-)). The roles of organic counterions are discussed on the basis of probable solubilization sites of the substrate molecule in the gemini micelles, showing more growth in case of Sal(-) than Benz(-). The results are confirmed in terms of the obtained values of chemical shift (δ), line width at half height (lw), and relative viscosity (η(r)). Also, the growth of micelles was most pronounced for the gemini surfactant with the shortest spacer (s=4). This was attributed to the unique molecular structure of gemini surfactant micelles having flexible polymethylene spacer chain linking the twin polar headgroups.     

A novel single source precursor: [bis(N,N-diethyl-N'-naphthoyl-selenoureato)palladium(II)] for palladium selenide thin films and nanoparticles

We describe for the first time the use of a single source precursor to deposit thin films and nanocrystals of palladium selenide.