The effect of rib shape on the behavior of laminar flow of oil/MWCNT nanofluid in a rectangular microchannel

Journal of Thermal Analysis and Calorimetry - In this research, the laminar and forced flow and heat transfer of oil/multi-walled carbon nanotubes nanofluid in a microchannel have been numerically...     

A sulfonic acid functionalized ionic liquid as a homogeneous and recyclable catalyst for the one-pot synthesis of α-aminophosphonates

A sulfonic acid functionalized ionic liquid is used as a Brønsted acid catalyst for the one-pot, three-component synthesis of α-aminophosphonates from aldehydes and ketones at room temperature in water. This homogeneous catalytic procedure is simple and efficient and the catalyst can be reused at least six times without any noticeable decrease in catalytic activity.     

Two building blocks of microwave photonics filters in the presence of group delay ripple: a comparative survey

We have developed an analytic approach to investigate the effect of group delay ripple of the dispersive devices on the performance of two major building blocks of microwave-photonic filters. Firstly, performance of PM-based block in the presence of an arbitrary group delay ripple (GDR) is analyzed and compared with the ripple-free case to reveal the destructive effects of added group delay ripple. In the next step, we repeat the proposed approach for the AM-based one; again, the performance is compared with the ripple-free case. Two distortion metrics are also introduced to quantify this distortion. Comparison of the performance of two building blocks in the presence of group delay ripple unveils some interesting characteristics of microwave-photonic filters which have not been mentioned so far. We also add a general survey of two analyzed building blocks to present their respective most significant advantages and shortcomings. The simulated Optisystem results conform to our proposed analytical approach and verify the theoretical model.     

Homogeneous liquid-liquid microextraction via flotation assistance coupled with gas chromatography-mass spectrometry for determination of myclobutanil in cucumber,tomato, grape,and strawberry using genetic algorithm

Facile and potent homogeneous liquid–liquid microextraction via flotation assistance method (HLLME-FA) combined with gas chromatography-mass spectrometry was proposed for determination of trace amounts of myclobutanil in fruit and vegetable samples. The paramount parameters, such as extraction and homogeneous solvent types and volumes, ionic strength and extraction time were studied. Under optimum conditions, the detection limit of 0.005 ng g^?1, the linear range of 0.05–100 ng g^?1, and the precision of 3.8% were acquired. A three-layer arti?cial neural network (ANN) model was used with 10 neurons and tan-sigmoid function at hidden layer and a linear transfer function at output layer were developed to predict the process. The results indicated that the proposed ANN model could perfectly predict the process with the mean square error of 0.89%. Then genetic algorithm was utilised to optimise the parameters. The proposed procedure showed satisfactory results for analysis of cucumber, tomato, grape, and strawberry.     

POSS nanocrosslinked poly (ethylene glycol) hydrogel as hybrid material support for silver nanocatalyst

Silver nanoparticles supported on polyhedral oligomeric silsesquioxane (OA‐POSS) nanocrosslinked poly (ethylene glycol)‐based hydrogels (PEG₆₀₀‐POSS/Ag NPs) as novel nanohybrid catalysts were synthesized for the first time. The as‐prepared nanohybrid hydrogels were fully characterized by FT‐IR, SEM, EDX, XRD, TEM and TGA. PEG₆₀₀‐POSS/Ag NPs exhibited excellent catalytic performance for the reduction of 4‐nitrophenol (4‐NP) to 4‐aminophenol (4‐AP) in water at room temperature in the presence of borohydride.     

Oxoperoxo tungsten(VI) complex immobilized on Schiff base-modified Fe3O4 magnetic nanoparticles as a heterogeneous catalyst for oxidation of alcohols with hydrogen peroxide

Oxoperoxo tungsten(VI) complex immobilized on Schiff base-modified Fe₃O₄ super paramagnetic nanoparticles were synthesized and appropriately characterized using FT-IR, XRD, SEM, TEM, EDX, BET, and VSM analysis. The synthesized nanoparticles efficiently catalyzed oxidation of benzylic alcohols with H₂O₂ as oxidant in high yields, with high to excellent selectivity. The catalyst can be recovered using an external magnetic field and recycled for subsequent oxidation reactions without any appreciable loss of efficiency. The simple preparation, high activity, excellent selectivity, and simple recoverability of the catalyst are advantageous.     

Thulium(III) Ions Monitoring by a Novel Thulium(III) Microelectrode Based on a S‐N Schiff Base

This study presents for the first time development of a highly selective and sensitive thulium(III) micro‐sensor. Theoretical calculations were conducted on a S‐N Schiff base [thiophene‐2‐carbaldehyde‐(7‐methyl‐1,3‐benzothiazol‐2‐yl) hydrazone] (TCMH) in order to obtain a clue about the tendency of TCMH to Tm(III) and some other metal ions. Then, TCMH was used as a membrane‐active component to prepare a Tm(III)‐selective polymeric membrane microelectrode. In line with the resulting data, the electrode exhibits a Nernstian response toward Tm(III) ions for a very wide concentration range (1.0×10^?11–4.0×10^?6 M) with a detection limit of 1.0×10^?11 (ca. 1.5 ppt) and a very fast response time in the whole concentration range (<5 s). In addition, the results showed that the certain microelectrode could be applied in the pH range of 4.0–11.0 with a usage of more than one month without any considerable potential divergence.     

Bubble formation induced by nanosecond laser ablation in water and its diagnosis by optical transmission technique

In this paper, bubble formation and ablation rate in laser ablation of a thin-film aluminum target are studied. The target was an aluminum thin-film coated on a quartz substrate and interacted by a nanosecond Nd:YAG laser beam in ambient air and distilled water. Measuring optical transmission of a He–Ne beam through the ablation region shows that the ablation rate in water is higher than that in ambient air. The results also show that an initial peak appears in the transmission signal which is an evidence for bubble formation in water. Analyzing the data is useful for monitoring the bubble formation in water and relatively estimating the ablation rate.     

Stability study of the gastric floating dosage form of capecitabine

Since administration of capecitabine tablets leading to dose limiting makes the unfavorable toxicity, preparation of sustained-release tablets will overcome most of these side effects. The aim of this study was to prepare and study the stability of capecitabine sustained-release tablets. Sustained-release tablets of capecitabine were characterized by differential scanning calorimetry, X-ray diffraction, and infrared and ultraviolet spectroscopy techniques to determine the stability of the tablets. All tests carried out for tablets upon preparation as well as 6 and 12 months after preparation. The gradual decomposition of capecitabine sustained-release tablets stored at accelerated conditions (40 °C in 75 % of relative humidity) was indicated by decreasing values of peak purity and melting temperature, calculated from the Van’t Hoff equation. Except for the occurrence of one sharp peak for long-term stability and some sharp peaks in the accelerated condition, all peaks showed a crystallized nature. But the FTIR and UV results showed that there were no changes between the initial sustained-release tablets and stored tablets. Although the XRD results showed more peaks in the accelerated condition tablets, the crystalline form of capecitabine was maintained. These findings demonstrate that the capecitabine sustained-release tablet has excellent stability in normal and long-term storage conditions, with slight changes in the accelerated condition.     

Development of a turbulent near-wall temperature model and its application to channel flow

A numerical study of fluid flow and heat transfer in a two-dimensional channel under fully developed turbulent conditions is reported. A computer program which is capable of treating both forced and natural convection problems under turbulent conditions has been developed. The code uses the high-Reynolds-number form of the two equation turbulent model(k-?) in which a turbulent kinetic energy near-wall model is incorporated in order to accurately represent the behavior of the flow near the wall, particularly in the viscous sublayer where the turbulent Reynolds number is small. A near-wall temperature model has been developed and incorporated into the energy equation to allow accurate prediction of the temperature distribution near the wall and, therefore, accurate calculation of heat transfer coefficients. The sensitivity of the prediction of flow and heat transfer to variations in the coefficients used in the turbulence model is investigated. The predictions of the model are compared to available experimental and theoretical results; good agreement is obtained. The inclusion of the near-wall temperature model has further improved the predictions of the temperature profile and heat transfer coefficient. The results indicate that the turbulent kinetic energy Prandtl number should be a function of Reynolds number.