Determination of migrated phthalic acid residues into edible oils using a green mode of air-assisted liquid–liquid microextraction followed by high-performance liquid chromatography–diode array detector

In this study, for the first time, an organic solvent-free air-assisted liquid–liquid microextraction method has been reported for the extraction and preconcentration of phthalic acids (o-phthalic acid, m-phthalic acid, and p-phthalic acid) from edible oil samples. The method is based on the repeated aspirating/injection of an alkaline aqueous solution and the oil sample mixture in a conical bottom centrifuge tube to form a cloudy solution. After phase separation by centrifuging, the sedimented phase is directly analyzed by high-performance liquid chromatography–diode array detection. Under the optimum extraction conditions, the method showed low limits of detection and quantification between 0.11–0.29 and 0.28–0.91 ng mL^?1, respectively. Extraction recoveries and enrichment factors were from 81 to 97% and 406 to 489, respectively. The relative standard deviations for the analysis of 5 ng mL^?1 of each analyte were less than 5.9% for intraday (n = 6) and interday (n = 5) precisions. Finally, different oil samples were successfully analyzed using the proposed method and m-phthalic acid, and p-phthalic acid were determined in some of them at ng mL^?1 level.     

Inhibitory effect of safranal and crocin,two principle compounds of <Emphasis Type="Italic">Crocus sativus</Emphasis>, on fibrillation of lysozyme

A key feature in more than twenty amyloid-related diseases is the aggregation of intra-and/or extracellular misfolded proteins as amyloid fibrils. Therefore, preventing or reversing amyloid aggregation by using of small molecules is considered as useful approaches to the treatment of these diseases. We have evaluated the ability of safranal and crocin, to inhibit amyloid self-assembly of hen egg white lysozyme (HEWL), as an in vitro model system. Structural properties of HEWL in the presence of these compounds were investigated individually using thioflavin T, anilinonaphthalene-8-sulfonic acid fluorescence assays, far-UV circular dichroism and scanning electron microscopy as well as docking method. Our results showed that incubation of HEWL with either crocin or safranal at various concentrations leads a significant inhibition in the rate of amyloid formation. Docking analysis revealed crocin and safranal interact with the central hydrophobic region of lysozyme through van der Waals interaction. Hydroxyl group in crocin through hydrogen bonds connected to the several hydrophilic amino acids of lysozyme, while in safranal there are just one aldehyde group that through hydrogen bonds connected to aspartic acid in lysozyme. It can be concluded that both hydrophobic and hydrophilic groups contribute to lower lysozyme fibril accumulation.     

An adaptive nonmonotone global Barzilai–Borwein gradient method for unconstrained optimization

The Barzilai–Borwein (BB) gradient method has received many studies due to its simplicity and numerical efficiency. By incorporating a nonmonotone line search, Raydan (SIAM J Optim. 1997;7:26–33) has successfully extended the BB gradient method for solving general unconstrained optimization problems so that it is competitive with conjugate gradient methods. However, the numerical results reported by Raydan are poor for very ill-conditioned problems because the effect of the degree of nonmonotonicity may be noticeable. In this paper, we focus more on the nonmonotone line search technique used in the global Barzilai–Borwein (GBB) gradient method. We improve the performance of the GBB gradient method by proposing an adaptive nonmonotone line search based on the morphology of the objective function. We also prove the global convergence and the R-linear convergence rate of the proposed method under reasonable assumptions. Finally, we give some numerical experiments made on a set of unconstrained optimization test problems of the CUTEr collection. The results show the efficiency of the proposed method in the sense of the performance profile introduced (Math Program. 2002;91:201–213) by Dolan and Moré.     

Candidates for nonzero Betti numbers of monomial ideals

Let I be a monomial ideal in the polynomial ring S generated by elements of degree at most d. In this paper, it is shown that, if the i-th syzygy of I has no elements of degrees j,…,j+(d?1) (where j≥i+d), then (i+1)-th syzygy of I does not have any element of degree j+d. Then we give several applications of this result, including an alternative proof for Green–Lazarsfeld index of the edge ideals of graphs as well as an alternative proof for Fröberg’s theorem on classification of square-free monomial ideals generated in degree 2 with linear resolution. Among all, we deduce a partial result on subadditivity of the syzygies for monomial ideals.     

Well‐posedness of initial boundary value problems on longitudinal impact on a composite linear viscoelastic bar

We investigate the correctness of the initial boundary value problem of longitudinal impact on a piecewise‐homogeneous semi‐infinite bar consisting of a semi‐infinite elastic part and finite length visco‐elastic part whose hereditary properties are described by linear integral relations with an arbitrary difference kernel. Introducing nonstationary regularization in boundary conditions and in the contact conditions, the well‐posedness of the considered problem is proved. Copyright © 2017 John Wiley & Sons, Ltd.     

A polyaniline-magnetite nanocomposite as an anion exchange sorbent for solid-phase extraction of chromium(VI) ions

This work describes a novel polyaniline-magnetite nanocomposite and its application to the preconcentration of Cr(VI) anions. The material was obtained by oxidative polymerization of aniline in the presence of magnetite nanoparticles. The parameters affecting preconcentration were optimized by a Box-Behnken design through response surface methodology. Extraction time, amount of magnetic sorbent and pH value were selected as the main factors affecting sorption. The sorption capacity of the sorbent for Cr(VI) is 54 mg g⁻¹. The type, volume and concentration of the eluents, and the elution time were selected as main factors in the optimization study of the elution step. Following sorption and elution, the Cr(VI) ions were reacted with diphenylcarbazide, and the resulting dye was quantified by HPLC with optical detection at 546 nm. The limit of detection is 0.1 μg L⁻¹, and all the relative standard deviations are <6.3 %. The nanocomposite was successfully applied to the rapid extraction and determination of trace quantities of Cr(VI) ions in spiked water samples.

A schematic procedure of magnetic solid phase extraction

     

A polyaniline-magnetite nanocomposite as an anion exchange sorbent for solid-phase extraction of chromium(VI) ions

This work describes a novel polyaniline-magnetite nanocomposite and its application to the preconcentration of Cr(VI) anions. The material was obtained by oxidative polymerization of aniline in the presence of magnetite nanoparticles. The parameters affecting preconcentration were optimized by a Box-Behnken design through response surface methodology. Extraction time, amount of magnetic sorbent and pH value were selected as the main factors affecting sorption. The sorption capacity of the sorbent for Cr(VI) is 54 mg g^?1. The type, volume and concentration of the eluents, and the elution time were selected as main factors in the optimization study of the elution step. Following sorption and elution, the Cr(VI) ions were reacted with diphenylcarbazide, and the resulting dye was quantified by HPLC with optical detection at 546 nm. The limit of detection is 0.1 μg L^?1, and all the relative standard deviations are <6.3 %. The nanocomposite was successfully applied to the rapid extraction and determination of trace quantities of Cr(VI) ions in spiked water samples. Figure

A schematic procedure of magnetic solid phase extraction     

Synthesis and application of a thermosensitive tri-block copolymer as an efficient sample treatment technique for preconcentration and ultra-trace detection of lead ions

We have designed and synthesized a thermosensitive tri-block copolymer for selective trace extraction of Pb(II) ions from biological and food samples. The polymer was characterized by Fourier transform IR and NMR spectroscopy, and by gel permeation chromatography. The critical aggregation concentration and lower critical solution temperature were determined via fluorescence and UV spectrophotometry, respectively. The effects of solution pH value, amount of copolymer, of the temperature on extraction and on phase separation, and of the matrix on the extraction of Pb(II) were optimized. Pb(II) ions were then quantified by FAAS. The use of this copolymer resulted in excellent figures of merit including a calibration plot extending from 0.5 to 160 μg L^?1 (with an R² of >0.99), a limit of detection (LOD) as low as 90 pg L^?1, an extraction efficiency of >98 %, and relative standard deviations of <4 % for eight separate extraction experiments.

Optical and electrochemical DNA nanobiosensors

In the past two decades, nanoscale advanced materials have been explored for biosensing molecules, so new horizons have opened up for identifying and quantifying biomolecules, and possible early diagnosis of diseases.DNA nanobiosensors show promise. This article provides an overview on their optical and electrochemical aspects. We discuss recent progress in this field, describing basic concepts of molecular beacons and quantum dots as optical nano-imaging systems. Also, carbon nanotubes provide a platform for development and advancement of electrochemical DNA nanobiosensors, which are increasingly being implemented as robust tools for detection in biomedical sciences.     

Online thorium determination after preconcentration in a minicolumn having XAD-4 resin impregnated with N-benzoylphenylhydroxylamine by FI-spectrophotometry

A very sensitive and selective flow injection on-line determination method of thorium (IV) after preconcentration in a minicolumn having XAD-4 resin impregnated with N-benzoylphenylhydroxylamine is described. Thorium (IV) was selectively adsorbed from aqueous solution of pH 4.5 in a minicolumn at a flow rate of 13.6 mL min^?1, eluted with 3.6 mol dm^?3 HCl (5.6 mL min^?1), mixed with arsenazo-III (0.05% in 3.6 mol dm^?3 HCl stabilized with 1% Triton X-100, 5.6 mL min^?1) at confluence point and taken to the flow through cell of spectrophotometer where its absorbance was measured at 660 nm. Peak height was used for data analyses. The preconcentration factors obtained were 32 and 162, detection limits of 0.76 and 0.150 ??g L^?1, sample throughputs of 40 and 11 h^?1 for preconcentration times of 60 and 300 s, respectively. The tolerance levels for Zr(IV) and U(VI) metal ions is increased to 50-folds higher concentration to Th(IV). The proposed method was applied on different spiked tap water, sea water and biological sample and good recovery was obtained. The method was also applied on certified reference material IAEA-SL1 (Lake Sediment) for the determination of thorium and the results were in good agreement with the reported value.