Synthesis of 2-arylbenzimidazoles catalyzed by transition metal nitrates

A simple and practical procedure for synthesis of 2-arylbenzimidazoles by a one-pot condensation of o-phenylenediamine with aromatic aldehydes in the presence of a catalytic amount of M(NO₃)₂·6H₂O (M = Mn, Fe, Co, Ni, Cu) in ethanol at room temperature is described. Major advantages of this practical procedure are use of a readily available catalyst, high yields, short reaction times, and simplicity of the reaction and workup.     

A mathematical model to characterise effects of liquid hold-up on bosh silicon transport in the dripping zone of a blast furnace

A first principle based mathematical model has been developed to characterise the effect of total liquid hold-up on the bosh silicon distribution behaviour in the dripping zone of a blast furnace. Two specific cases of hold-up behaviour have been investigated, namely, hold-up in the absence and in the presence of counter current gas flow conditions. The model exemplifies coupled phenomenon of chemical kinetics, transport processes and liquid hold-up to characterise the silicon behaviour in the dripping zone. The present modelling investigation shows that the bosh silicon level diminishes with the enhanced liquid hold-up in the dripping zone. Further, the influence of counter current gas flow on the hold-up is not significant. However, it has been observed that the liquid phase temperature reduces with increased liquid hold-up in dripping zone under steady state operating conditions. The model predictions of bosh silicon distribution have been validated with the published literatures (bulk values) and found to be in good agreement.     

Treated Rice Bran for Scavenging Cr(III) and Hg(II) from Acidic Solution

The purpose of this study was to examine the efficiency with which rice bran (treated or untreated) removes heavy metals, especially Cr(III) and Hg(II), from acidic solution. Sorption assays were done in shaken flasks in the presence of rice bran. Different experimental conditions such as pH, volume of solution, bran weight, particle size, exchange time and stirring time were improved. The efficiency of bran was studied before and after treatments. For treatment, solutions of acid, alkali and salt were used. The results show that after treating with 4 M sodium chloride solution, its efficiency in removal of Cr(III) and Hg(II) was improved. Kinetic measurements of chromium and mercury removal by bran have revealed that sorption equilibrium was obtained after 10 min of contact. Sorption experiments done with various granulometric fractions of rice bran have shown that this sorbent has the same efficiencies in meshes higher than 20. Further research is necessary in order to determine a mechanism for cations removal by the bran. It is mentioned that the process of making polished rice from brown rice discharges rice bran; therefore, it is very inexpensive, with a cost of 1/50 ? 1/40 of that of synthetic sorbent, and thus its use would significantly lower the cost of wastewater treatment.     

Thermotropic polyesters. 1: Synthesis, characterization and thermal transition of poly[4,4-bis(ω-alkoxy)biphenyl isophthalate]

A new homologous series of thermotropic polyesters has been synthesized by polycondensation reaction between isophthaloyl chloride and mesogenic diols 4,4^′-bis(ω-hydroxyalkoxy)biphenyl in which the spacer length is varied from 3 to 6 methylene units. The thermal behavior of the polymers has been characterized using polarized light microscopy and differential scanning calorimetry (DSC). The odd members exhibit a smectic C (S_C) phase in a narrow temperature interval, while the even members form a smectic A (S_A) phase in a broader temperature range. All of the obtained compounds were characterized by conventional spectroscopic methods.     

Polyol‐enhanced dispersive liquid–liquid microextraction coupled with gas chromatography and nitrogen phosphorous detection for the determination of organophosphorus pesticides from aqueous samples,fruit juices,and vegetables

Polyol‐enhanced dispersive liquid–liquid microextraction has been proposed for the extraction and preconcentration of some organophosphorus pesticides from different samples. In the present study, a high volume of an aqueous phase containing a polyol (sorbitol) is prepared and then a disperser solvent along with an extraction solvent is rapidly injected into it. Sorbitol showed the best results and it was more effective on the extraction recoveries of the analytes than inorganic salts such as sodium chloride, potassium chloride, and sodium sulfate. Under the optimum extraction conditions, the method showed low limits of detection and quantification within the ranges of 12–56 and 44–162 pg/mL, respectively. Enrichment factors and extraction recoveries were in the ranges of 2799–3033 and 84–92%, respectively. The method precision was evaluated at a concentration of 10 ng/mL of each analyte, and relative standard deviations were found to be less than 5.9% for intraday (n = 6) and less than 7.8% for interday (n = 4). Finally, some aqueous samples were successfully analyzed using the proposed method and four analytes (diazinon, dimethoate, chlorpyrifos, and phosalone) were determined, some of them at ng/mL level.     

Estimation of thermal conductivity of ethylene glycol-based nanofluid with hybrid suspensions of SWCNT–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles by correlation and ANN methods using experimental data

In the present paper, the effects of temperature and volume fraction on thermal conductivity of SWCNT–Al₂O₃/EG hybrid nanofluid are investigated. Single-walled carbon nanotube with outer diameter of 1–2 nm and aluminum oxide nanoparticles with mean diameter of 20 nm with the ratio of 30 and 70%, respectively, were dispersed in the base fluid. The measurements were conducted on samples with volume fractions of 0.04, 0.08, 0.15, 0.3, 0.5, 0.8, 1.5 and 2.5. In order to investigate the effects of temperature on thermal conductivity of the nanofluid, this characteristic was measured in five different temperatures of 30, 35, 40, 45 and 50 °C. The results indicate that enhancement of nanoparticles’ thickness in low volume fractions and at any temperature causes a considerable increment in thermal conductivity of the nanofluid. In this study, the highest enhancement of thermal conductivity was 41.2% which was achieved at the temperature of 50 °C and volume fraction of 2.5%. Based on the experimental data, an experimental correlation and a neural network are presented and for thermal conductivity of the nanofluid in terms of volume fraction and temperature. Comparing outputs of the experimental correlation and the designed artificial neural network with experimental data, the maximum error values for the experimental correlation and the artificial neural network were, respectively, 2.6 and 1.94% which indicate the excellent accuracy of both methods in prediction of thermal conductivity.